Clearaudio Ovation Manuel utilisateur
Ovation
clearaudio electronic®GmbH
Spardorfer Str. 150 • D-91054 Erlangen • Tel. +49 9131 40300100 • FAX + 49 9131 40300119
www.clearaudio.de • www.analogshop.de • info@clearaudio.de
© clearaudio electronic GmbH 2016
Version: 2.3_19.08.2016_E
User manual
Made in Germany
Silver with natural wood chassis
Black with black chassis
Dear Clearaudio customer,
You have purchased a State-Of-The-Art turntable, the
Ovation
, a world class product of Clearaudio
electronic GmbH.
Congratulations on your purchase!
With the
Ovation
turntable, Clearaudio made use of the OSC (Optical-Speed-Control) technology found
in the
Innovation
turntables series by implanting it into a precision milled Panzerholz (bullet proof wood)
chassis. This chassis is combined with an anti-resonance mat that is capable of absorbing a huge amount
of energy. This is due to the use of more than 100,000 small stainless steel balls which absorb unwanted
resonance.
Thus, the turntable combines the latest technology and innovation in a classic design, at a perfect price/
performance ratio.
Please read this user manual carefully so that you can enjoy all the advantages of your
Ovation
turntable. All information given will help to generate the best performance and avoid any possible
damages.
We hope you will enjoy your new Clearaudio
Ovation
turntable.
Clearaudio electronic GmbH
Please read the warnings before connecting your
Ovation
turntable to the mains supply.
Ovation
User manual
WARNINGS
Don’t expose your turntable to rain or humidity.
Don’t handle the mains leads with wet hands.
Don’t place or insert anything into the equipment or through ventilation holes.
No naked ame sources, such as lighted candles, should be placed on the equipment.
CE-MARKING
COPYRIGHT
Recording und reproduction of any sound-material may require the consent of the creator.
Please acknowledge the information given in the
- Copyright Act 1956,
- Dramatic and Musical Performers Act 1958,
- Performers Protection Acts 1963 and 1972,
- Any more recent legal regulations.
Page 2 © clearaudio electronic GmbH 2016
The Clearaudio
Ovation
meets the regulations concerning electromagnetic disturbance (EMC)
and low-voltage appliances.
User manual 1 - 15
Contents
1. Packaging overview 4
2. Set-up and operation 5 - 12
3. Special notes 13
4. Technical data 14
Warranty information 15
Page 3 © clearaudio electronic GmbH 2016
Ovation
User manual
1. Packaging overview
The Clearaudio
Ovation
turntable is delivered in specially designed custom packaging.
Please check the contents according to the following list before you set up your new Clearaudio
Ovation
turntable.
Page 4 © clearaudio electronic GmbH 2016
Pic. 1: Packaging overview
Ovation
User manual
1. Layer (top):
Top of bearing, belt,
ttings and accessories
(Quality and warranty card,
bearing oil)
If ordered as set:
tonearm and/or cartridge
2. Layer (middle):
Turntable chassis
3. Layer (bottom):
Platter,
aluminum sub-platter
IMPORTANT NOTICE:
Please double check the tightness of all bolts and armboard mounting hardware, as temperature
uctuations during transit may have caused the hardware to become loose.
2. Setup and operation
The
Ovation
turntable consists of several components, as described in No 1 (Packaging overview).
The setup is easy, as some of the components are pre-assembled at the factory.
Please make use of the white gloves enclosed in order to avoid scratches or unwanted ngerprints
(e.g. on the platter).
Please follow the instructions step by step:
The
Ovation
requires a space of at least 16.54 inch x 13.78 inch for positioning.
Page 5 © clearaudio electronic GmbH 2016
Ovation
User manual
16.54 inch
/ 420 mm
13.78 inch / 350 mm
Pic. 2: Setup space
2.1
Place the pre-mounted chassis on your hi-rack or another suitable surface.
Page 6 © clearaudio electronic GmbH 2016
Ovation
User manual
Pic. 3: Placing the
Ovation
on the Flat Pads
2.2
To avoid hum noises it can be necessary to ground the bearing. For that please plug in the provided ground
cable into the hole of the screw from the bearing at the bottom side of the turntable and connect the other
end with your amplier.
Pic. 4: Grounding the bearing of the
Ovation
2.3
Please remove the protective seal from the bearing shaft and place two drops of the synthetic bearing oil
(Art. No. AC068 available through www.analogshop.de), on the ceramic bearing shaft. Slip the bearing top
onto the bearing shaft of the turntable.
Pic. 5: Bearing oil
Page 7 © clearaudio electronic GmbH 2016
Ovation
User manual
2.4
Now you can set the bearing upper part carefully onto the bearing.
To avoid damages make sure you slide the bearing upper part slowly and carefully on the polished ceramic
shaft.
Pic. 6: Fitting the bearing upper part
2.5
Now you can set the sub-platter carefully onto the bearing.
First remove the security mat on the backside of the sub-platter (security tape for OSC - graduated collar
(Optical Speed Control)).
To avoid any damage, make sure you slide the sub-platter slowly and carefully onto the bearing.
After that, take the included belt and place it around the motor and the sub-platter.
At this point the sub-platter will be higher than the pulley. This is normal, as the CMB requires the weight
of the platter to fully engage it.
Pic. 7: Setting the sub-platter Pic. 7.1: Placing the belt
Page 8 © clearaudio electronic GmbH 2016
2.6
Now you can set the platter carefully onto the bearing. To avoid damage, make sure you slide the platter
slowly and cautiously on the sub-platter/ bearing assembly. Hold the platter securely, so the platter does
not slip or fall on your turntable.
Ovation
User manual
Pic. 8: Setting the platter onto the bearing
2.7
Please check with the bubble level gauge, if your
Ovation
turntable is in a level position.
You can adjust each of the turntable’s feet to get the turntable
level.
Only if the turntable is in a level position will you get the best
results with your turntable.
Adjust the height be turning the threaded spike feet.
When the table is properly level, lock the feet in place with the nut
(see below).
Please note:
Through turning the feets clockwise you will raise the turntable,
by turning counter clockwise the turntable will lower.
Pic. 9: Adjustment of level
Pic. 9.1: Adjustment of the height
Page 9 © clearaudio electronic GmbH 2016
Ovation
User manual
2.8
For tonearm and cartridge mounting please refer to the user manual of the respective manufacturer.
Now you can connect the
Ovation
turntable with the main supply.
Position of the screw
to fasten the tonearm
with 2 mm allen key
Boring for the
tonearm feet
1. Insert carefully rst the cable and then the tonearm feet through the hole of the tonearm base.
2. Now adjust the tonearm height.
3. At the end secure the tonearm with the screws with are already integrated at the front of the
mounting base.
4. For tonearm and cartridge mounting please refer to the user manual of the respective manufacturer.
Pic. 10: Rear view Clarify tonearm
Page 10 © clearaudio electronic GmbH 2016
Ovation
User manual
If you purchased the Clearaudio
Ovation
as package with tonearm and cartridge, you received also a
Smart Stlyus Gauge as accessories, which allows you to adjust the tracking force of the cartridge.
Pic. 11: Use of the Smart Stylus Gauge
✓
tracking force too high! /
Auagekraft zu hoch!
tracking force too low! /
Auagekraft zu niedrig!
Diese Position der Nadel entspricht
einer Auagekraft von 20 mN (2,0g).
This position of the diamond correlates
to a tracking force of 20 mN (2.0g).
Autres manuels pour Ovation
4
Table des matières
Autres manuels Clearaudio Platine
Clearaudio
Clearaudio Universal Manuel utilisateur
Clearaudio
Clearaudio Melody V2 Manuel utilisateur
Clearaudio
Clearaudio TT3 Manuel utilisateur
Clearaudio
Clearaudio Charisma V2.1 MM Manuel utilisateur
Clearaudio
Clearaudio Verify Manuel utilisateur
Clearaudio
Clearaudio Avantgarde Manuel utilisateur
Clearaudio
Clearaudio Turbo Weight Manuel utilisateur
Clearaudio
Clearaudio Statement V2 Manuel utilisateur
Clearaudio
Clearaudio Performance DC Manuel utilisateur
Clearaudio
Clearaudio Innovation Wood Manuel utilisateur
Clearaudio
Clearaudio Peerformance Manuel utilisateur
Clearaudio
Clearaudio Pulley extractor device Manuel utilisateur
Clearaudio
Clearaudio TT1-MI Manuel utilisateur
Clearaudio
Clearaudio double matrix professional SONIC Manuel utilisateur
Clearaudio
Clearaudio Jubilee MM Manuel utilisateur
Clearaudio
Clearaudio Emotion Manuel utilisateur
Clearaudio
Clearaudio Performance DC Manuel utilisateur
Clearaudio
Clearaudio Statement TT1 Manuel utilisateur
Clearaudio
Clearaudio Ovation Manuel utilisateur
Clearaudio
Clearaudio Master Innovation Manuel utilisateur
