Clarke CHT738 Mode d’emploi

OPERATION & MAINTENANCE

INSTRUCTIONS

LS0413

HAMMER TACKER

MODEL NO: CHT738

PART NO: 1801738

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INTRODUCTION

Thank you for purchasing this CLARKE Hammer Tacker.

Before attempting to use this product, please read this manual thoroughly and

follow the instructions carefully. In doing so you will ensure the safety of yourself

and that of others around you, and you can look forward to your purchase

giving you long and satisfactory service.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12

months from the date of purchase. Please keep your receipt which will be

required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or

tampered with in any way, or not used for the purpose for which it was

intended.

Faulty goods should be returned to their place of purchase, no product can

be returned to us without prior permission.

This guarantee does not effect your statutory rights.

SUITABLE STABLES

Suitable staples are available from your Clarke dealer

Model Number CHT739

Part Number 1801739

Pack includes 200 x 6 mm staples

200 x 8 mm staples

200 x 10 mm staples

200 x 12 mm staples

200 x 14 mm staples

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS

1. DO NOT SWING THE HAMMER TACKER IN THE DIRECTION OF OTHERS. Be

cautious of others that may be behind you.

2. ALWAYS USE THE RECOMMENDED STAPLES. Suitable staples are available

from your Clarke dealer (details below).

3. KEEP WORK AREA CLEAN. Cluttered areas and benches invite injuries.

4. CONSIDER WORK AREA ENVIRONMENT. Don't expose the tool to rain. Keep

work area well lit.

5. KEEP CHILDREN AWAY. All visitors should be kept away from the work area.

Do not let visitors contact the tool.

6. STORE IDLE TOOLS. When not in use, tools should be stored in dry, high or

locked-up place - out of reach of children.

7. DON'T OVERREACH. Keep proper footing and balance at all times.

8. STAY ALERT. Watch what you are doing. Use common sense. Do not

operate the tool when you are tired.

9. DO NOT STAPLE INTO OR OVER ELECTRICAL WIRES especially those which

may be hidden from view.

10. To minimize the risk of injury, always wear gloves and use eye protection.

11. Do not use in damp or wet conditions.

SAVE THESE INSTRUCTIONS FOR FUTURE USE

SAFETY SYMBOLS

Wear eye protection

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

USING YOUR HAMMER TACKER

SELECTING THE RIGHT STAPLE:

To maximize performance, your hammer tacker has been designed to work

with Clarke staples available from you local Clarke dealer.

SELECTING THE RIGHT STAPLE LENGTH:

As a general guideline, when stapling into wood, allow for staple leg

penetration of approximately 4.5 - 6.0 mm.

LOADING INSTRUCTIONS

1. Push the feeder button inwards

slightly then press downwards to

unlock the feeder strip.

2. Once lock is unhooked, pull the

feeder strip out from the staple

chamber.

• Do not twist the staple feeder

button.

3. Load a strip of staples into the

loading tunnel as shown.

4. Slide in the feeder strip.

5. Push the feeder button upwards

to its locked position.

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

OPERATING INSTRUCTIONS

1. Hold the hammer tacker in the

hand as you would a

conventional hammer.

2. Select the area to be stapled and

bring the tacker down in a

hammer striking motion.

• The impact of the hammer

tacker on the stapling surface

will fire a staple and move the

next staple forward into the

firing position. Simply repeat the procedure for additional stapling.

CLEARING A JAM

1. Remove the feeder strip as indicated in the loading instruction section.

2. Remove all staples.

3. Use pliers to pull out any staples that have jammed.

MAINTENANCE

STORING YOUR HAMMER TACKER

• When finished using your hammer tacker, unload any remaining

staples.

•Storeinadryplace,out of the reach of children.

Table des matières

Autres manuels Clarke Outils

Clarke

Clarke CAT138 Manuel d'installation et d'exploitation

Clarke

Clarke IT1500 Mode d’emploi

Clarke

Clarke METALWORKER CTR1 Mode d’emploi

Clarke

Clarke CHT 455 Manuel utilisateur

Clarke

Clarke X-PRO CAT170 Manuel d'installation et d'exploitation

Clarke

Clarke CDTJ12 Mode d’emploi

Clarke

Clarke Strong-Arm CFB600 Manuel utilisateur

Clarke

Clarke CHT637 Manuel d'installation et d'exploitation

Clarke

Clarke CHT204 Manuel utilisateur

Clarke

Clarke Strong-Arm CLL500 Manuel

Clarke

Clarke CHT 141 Manuel utilisateur

Clarke

Clarke X-pro CAT164 Manuel d'installation et d'exploitation

Clarke

Clarke CAT120 Mode d’emploi

Clarke

Clarke CAT29B Manuel d'installation et d'exploitation

Clarke

Clarke CAT151 Manuel d'installation et d'exploitation

Clarke

Clarke CDS300B Manuel utilisateur

Clarke

Clarke CHT697 Guide d'installation

Clarke

Clarke CHT706 Manuel utilisateur

Clarke

Clarke METALWORKER CMSSCS Manuel utilisateur

Clarke

Clarke CHT733 Manuel utilisateur

Clarke

Clarke Air CHR9P Manuel utilisateur

Clarke

Clarke CAT114 Mode d’emploi

Clarke

Clarke CONTRACTOR CWJ700 Mode d’emploi

Clarke

Clarke KIT700 Mode d’emploi

Manuels Outils populaires d'autres marques

Martor

Martor SECUNORM 175 Manuel utilisateur

ERKCO

ERKCO 1000 Manuel utilisateur

jbc

jbc N4473 Manuel utilisateur

FEINMETALL

FEINMETALL FZWZ-SET-001 Manuel utilisateur

Worx Professional

Worx Professional Sonicrafter WU676 Manuel utilisateur

Gage Bilt

Gage Bilt GB713SH Manuel utilisateur

Hilti

Hilti DX 9-ENP Manuel utilisateur

norbar

norbar NORTRONIC 34399 Manuel utilisateur

BGS technic

BGS technic 8578 Manuel utilisateur

Makita

Makita DHR241 Manuel utilisateur

Motor Guard

Motor Guard JMB-1250 Manuel utilisateur

Power Adhesives

Power Adhesives 805-12 Manuel utilisateur

Clemco

Clemco 24189 Manuel utilisateur

VVG

VVG VNG 903 Series Manuel utilisateur

Hilti

Hilti FX 3-A Manuel utilisateur

Grizzly

Grizzly H6472 Manuel utilisateur

axing

axing BWZ 5-02 Manuel utilisateur

Dh-Robotics

Dh-Robotics RGI-100 Comment utiliser