Clarke CMC36B Manuel utilisateur

ASSEMBLY INSTRUCTIONS

GC0422

ORIGINAL INSTRUCTIONS

CAR CREEPERS

MODEL NO: CMC36B & CMC40B

PART NO: 7630207 & 7630208

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INTRODUCTION

Thank you for purchasing this CLARKE Car Creeper. Before attempting to use

this product, please read this manual thoroughly and follow the instructions

carefully. In doing so you will ensure the safety of yourself and that of others

around you, and you can look forward to your purchase giving you long and

satisfactory service.

SPECIFICATIONS

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12

months from the date of purchase. Please keep your receipt which will be

required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or

tampered with in any way, or not used for the purpose for which it was

intended.

Faulty goods should be returned to their place of purchase, no product can

be returned to us without prior permission. This guarantee does not effect your

statutory rights.

PRODUCT INVENTORY

• 1 Car creeper body

•6Castors

• 12 M6 x 23mm Coachbolts

• 12 M6 Nylock nuts

• 12 Washers 16mm o/d

• 12 Spacers

• Plastic nut key

If any parts are missing or damaged contact your CLARKE dealer immediately.

CMC36B CMC40B

Dimensions (L x W x H) 910 x 410 x 100mm 1010 x 475 x 125mm

Underside clearance min 29mm/max 65mm min 38mm/max 87mm

Maximum load 113kg (250lb) 113kg (250lb)

Weight 3.25kg 5kg

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

SAFETY PRECAUTIONS

1. NEVER allow the creeper to be used as a plaything such as a skateboard.

Keep children away at all times...this is NOT a toy.

2. ALWAYS use on a hard level surface, not in the vicinity of drains, holes,

curbs, cracks etc., as this could cause serious damage to the castors.

3. ALWAYS check your car creeper regularly for damage before use and if

any is apparent, have it repaired before use. Remember, broken, worn or

missing parts could result in injury.

4. DO NOT modify this product in any way. Unauthorized modifications may

impair the function and/or safety and could effect the life of the product.

5. DO NOT exceed the maximum rated load capacity.

6. DO NOT stand on the car creeper or use as a stepping device.

7. ALWAYS sit down slowly & carefully on the creeper to avoid shock loading.

8. DO NOT place under a car tyre to move or reposition a vehicle.

9. ALWAYS make sure the vehicle being worked on is properly supported with

axle stands and the wheels are chocked before going under the vehicle.

10. DO NOT drop the creeper onto the ground.

11. When not in use, it should be stored carefully and not left lying around for

others to trip over.

ASSEMBLY

1. Fit each castor to the creeper body

using the fastenings provided.

2. Insert the coachbolts through the

castors from below, inserting the

spacers into each of the mounting

holes before adding the washers and

locknuts from above.

3. Use the nut key supplied, or a suitable

socket wrench to tighten the nuts.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Clarke Outils

Clarke

Clarke Air CHR9P Manuel utilisateur

Clarke

Clarke Strong-Arm CLL500 Manuel

Clarke

Clarke CHT204 Manuel utilisateur

Clarke

Clarke CHT738 Mode d’emploi

Clarke

Clarke CAT29B Manuel d'installation et d'exploitation

Clarke

Clarke PC108 Instructions de montage

Clarke

Clarke CHT204 Manuel utilisateur

Clarke

Clarke CRT 40 Manuel utilisateur

Clarke

Clarke CHT706 Manuel utilisateur

Clarke

Clarke CAT66 Manuel utilisateur

Clarke

Clarke CDTJ12 Mode d’emploi

Clarke

Clarke CONTRACTOR CSJ100 Mode d’emploi

Clarke

Clarke CMFT250 Mode d’emploi

Clarke

Clarke CAT33B Manuel d'installation et d'exploitation

Clarke

Clarke CHT403 Manuel utilisateur

Clarke

Clarke CHT 455 Manuel utilisateur

Clarke

Clarke CAR15PC Manuel utilisateur

Clarke

Clarke CAT218 Manuel d'installation et d'exploitation

Clarke

Clarke KIT700 Mode d’emploi

Clarke

Clarke CHT877 Manuel utilisateur

Clarke

Clarke CSB20B Manuel utilisateur

Clarke

Clarke Air CAT62 Manuel d'installation et d'exploitation

Clarke

Clarke X-pro CAT164 Manuel d'installation et d'exploitation

Clarke

Clarke CHT 141 Manuel utilisateur

Manuels Outils populaires d'autres marques

Martor

Martor SECUNORM 175 Manuel utilisateur

ERKCO

ERKCO 1000 Manuel utilisateur

jbc

jbc N4473 Manuel utilisateur

FEINMETALL

FEINMETALL FZWZ-SET-001 Manuel utilisateur

Worx Professional

Worx Professional Sonicrafter WU676 Manuel utilisateur

Gage Bilt

Gage Bilt GB713SH Manuel utilisateur

Hilti

Hilti DX 9-ENP Manuel utilisateur

norbar

norbar NORTRONIC 34399 Manuel utilisateur

BGS technic

BGS technic 8578 Manuel utilisateur

Makita

Makita DHR241 Manuel utilisateur

Motor Guard

Motor Guard JMB-1250 Manuel utilisateur

Power Adhesives

Power Adhesives 805-12 Manuel utilisateur

Clemco

Clemco 24189 Manuel utilisateur

VVG

VVG VNG 903 Series Manuel utilisateur

Hilti

Hilti FX 3-A Manuel utilisateur

Grizzly

Grizzly H6472 Manuel utilisateur

axing

axing BWZ 5-02 Manuel utilisateur

Dh-Robotics

Dh-Robotics RGI-100 Comment utiliser