Clarke GH1 Manuel utilisateur

GREENHOUSE HEATERS

OPERATING INSTRUCTIONS

Model Nos. GH1 & GH2

0100

Thank you for purchasing this CLARKE Greenhouse Heater

Please read this leaflet thoroughly and follow the instructions carefully, in doing so you will

ensure the safety of yourself and that of others around you, and you can look forward to the

Heater giving you long and satisfactory service.

GUARANTEE

This CLARKE product is guaranteed against faulty manufacture for a period of 12 months

from the date of purchase. Please keep your receipt as proof of purchase. This guarantee

is invalid if the product is found to have been abused or tampered with in any way, or not

used for the purpose for which it was intended.

Faulty goods should be returned to their place of purchase, no product can be returned to

us without prior permission.

This guarantee does not effect your statutory rights.

ASSEMBLY

Attach the the chimney/s to the top heater plate using the self-tapping screws provided.

IMPORTANT:

THIS HEATER IS FOR USE IN A GREENHOUSE ONLY, AND SHOULD NOT, UNDER ANY

CIRCUMSTANCES BE USED IN A DWELLING, CONSERVATORY, WORKSHOP OR GARAGE

VENTILATION

Open the ventilators in the ridge of your greenhouse, away from the wind. Some

ventilation is very important in a greenhouse, even on cold days and nights,

otherwise the burner will be starved of oxygen and the flame will die down.

Draughts of course must be avoided. Position the heater on a flat, level floor in

such a place that accidental movement or knocking over would not be possible.

HUMIDITY

If humidity is required in the greenhouse, place a pan or tray of water near the

heater, and top-up as required. Humidity is more likely to be required in the Spring,

Summer and Autumn than in the Winter. In wintertime, it is recommended that

too much humidity should be avoided.

SAFETY PRECAUTIONS

•ALWAYSuse premium grade paraffin to BS 2869:C1 as this is the ONLY fuel

suitable for safe use of your heater.

• NEVER attempt to fill or top-up your heater whilst it is lit and never move the

heater when lit.

• ALWAYS Use a clean, dry receptacle (and funnel if used) for transferring paraffin

from the main storage to the container and ALWAYS wipe any spillages from

the outside of the container.

• DO NOT under any circumstances use a vessel that has previously contained

water, petrol or methylated spirits to store your paraffin.

HOW TO LIGHT AND MAINTAIN THE LAMP

Before lighting a new wick, or an old wick after a period of disuse, remove the

wick from the burner(s) and ensure it is dry. This is most essential because if the

wick is damp, the paraffin will not soak right up the wick evenly and the correct

flame quality will not be achieved.

Re-fit the wick(s) and allow to soak well for about 30 minutes before lighting. If

one end of the wick is coloured it is that end which should be fitted uppermost

and lit.

Always make sure that the domed top of the burner is pressed securely in position,

and that the complete burner is screwed firmly into the screwed collar on the oil

tank.

in the case of model GH2, both wicks in the burner MUST be lit.

With the chimney removed, light the wick/s. When lit, replace the chimney and,

looking through the view slots in the chimney, adjust the flame height to about ¼

inch above the brass dome of the burner.

As the burner warms up, the flame height will increase, so it is important to adjust

the flame to a final height of about ½ inch - after 15 minutes or so.

Avoid the temptation to turn the wicks up too high thinking that a higher

temperature will be the result.....this will not be the case and the extreme result

will be that the wicks will give off excessive fumes and soot.

The appropriate heat will be achieved by setting the wicks as described above.

To extinguish the flames, use the extinguisher lever on the burner by pressing firmly

downwards.

At no time whilst the heater is lit or just extinguished should the chimney or top be

touched as it will be very hot and could inflict severe burns. The heater is designed

to get hot in order to be an efficient from of greenhouse heating.

Before re-lighting the heater, pull the extinguisher lever back up to expose the

wicks.

Always keep the burner perfectly clean, and remove any loose char that gathers

on the burner and wicks. Do not use scissors to trim the wicks.

Maximum efficiency of your heater will be obtained by following these simple

rules.

Always keep the container well supplied with paraffin to ensure that the wicks are

well immersed, otherwise the wicks will be starved of paraffin and the flame will

die down. Before bringing the heater into use at the beginning of a new season,

always clean out and thoroughly dry the container.

PARAFFIN

Remember to stock spare paraffin in a separate store.

SPARE PARTS

The following parts are available from your Clarke dealer:

1. Eltex Wick (2pcs) .................... BRES444

2. Brass Burner (single) ............... BRES821

3. Filler Cap ................................. BRES000

For Spare Parts and Servicing, please contact your nearest dealer, or

CLARKE International, on one of the following numbers.

PARTS & SERVICE TEL: 020 8988 7400

PARTS & SERVICE FAX: 020 8558 3622

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Clarke Chauffage

Clarke

Clarke CFI 1800 Mode d’emploi

Clarke

Clarke DEVIL 370SPD Manuel d'installation et d'exploitation

Clarke

Clarke DEVIL 6025 Mode d’emploi

Clarke

Clarke OFR 9 Mode d’emploi

Clarke

Clarke DEVIL 370SPC Manuel d'installation et d'exploitation

Clarke

Clarke DEVIL 4035 Manuel d'installation et d'exploitation

Clarke

Clarke DEVIL 4003 Mode d’emploi

Clarke

Clarke DEVIL155 Manuel

Clarke

Clarke DEVIL 370PD Manuel d'installation et d'exploitation

Clarke

Clarke 6933990 Mode d’emploi

Clarke

Clarke DEVIL IRD40B Mode d’emploi

Clarke

Clarke BR9/200 Mode d’emploi

Clarke

Clarke DEVIL 350 230V Manuel d'installation et d'exploitation

Clarke

Clarke Devil 370B Series Manuel d'installation et d'exploitation

Clarke

Clarke XR80 Mode d’emploi

Clarke

Clarke Devil 6002 Manuel

Clarke

Clarke DEVIL 2800PTC Mode d’emploi

Clarke

Clarke XRV100 Guide de dépannage

Clarke

Clarke CONTRACTOR GRH30 Mode d’emploi

Clarke

Clarke DEVIL 340 Mode d’emploi

Clarke

Clarke DEVIL 350B 230V Manuel d'installation et d'exploitation

Clarke

Clarke DEVIL 371SPD Manuel d'installation et d'exploitation

Clarke

Clarke CONTRACTOR DEVIL371PD Manuel d'installation et d'exploitation

Clarke

Clarke XR60 Manuel d'installation et d'exploitation

Manuels Chauffage populaires d'autres marques

oventrop

oventrop Regucor Series Manuel utilisateur

Blaze King

Blaze King CLARITY CL2118.IPI.1 Manuel utilisateur

ELMEKO

ELMEKO ML 150 Manuel utilisateur

BN Thermic

BN Thermic 830T Manuel utilisateur

KING

KING K Series Mode d’emploi

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Guide de démarrage rapide

Well Straler

Well Straler RC-16B Manuel utilisateur

EUROM

EUROM 333299 Manuel utilisateur

Heylo

Heylo K 170 Manuel utilisateur

Eterna

Eterna TR70W Manuel utilisateur

IRSAP

IRSAP The Radiator Company Ovali Manuel utilisateur

Empire Heating Systems

Empire Heating Systems WCC65 Manuel utilisateur

Wetekom

Wetekom 92 86 43 Manuel utilisateur

Desa

Desa SPC170-F Manuel utilisateur

Watlow

Watlow Watrod Electric Tubular Heaters Manuel utilisateur

Haverland

Haverland ECO-DRY GPS Series Manuel de la liste des pièces

Stelpro

Stelpro ASILVC2060 Series Manuel utilisateur

iLO

iLO IHP2424 Manuel d'utilisation