Cabletron Systems 6H122-08 Manuel utilisateur

9032159-02

6H122-08

SmartSwitch 6000

Interface Module

User’s Guide

6H122-08

FAST ENET

COM

CPU

100 Mbs

RESET

6H122-08 User’s Guide i

NOTICE

Cabletron Systems reserves the right to make changes in speciﬁcations and other information

contained in this document without prior notice. The reader should in all cases consult Cabletron

Systems to determine whether any such changes have been made.

The hardware, ﬁrmware, or software described in this manual is subject to change without notice.

IN NO EVENT SHALL CABLETRON SYSTEMS BE LIABLE FORANY INCIDENTAL,

INDIRECT, SPECIAL, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING BUT

NOT LIMITED TO LOST PROFITS) ARISING OUT OF OR RELATED TO THIS MANUAL OR

THE INFORMATION CONTAINED IN IT, EVEN IF CABLETRON SYSTEMS HAS BEEN

ADVISED OF, KNOWN, OR SHOULD HAVE KNOWN, THE POSSIBILITY OF SUCH

DAMAGES.



1998 by Cabletron Systems, Inc., P.O. Box 5005, Rochester, NH 03866-5005

Printed in the United States of America

Order Number: 9032159-02 August 1998

Cabletron Systems

is a registered trademark and

SmartSwitch

is a trademark of Cabletron Systems,

Inc.

All other product names mentioned in this manual may be trademarks or registered trademarks of

their respective companies.

FCC NOTICE

This device complies with Part 15 of the FCC rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

NOTE:

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environment.

This equipment uses, generates, and can radiate radio frequency energy and if not installed in

accordance with the operator’s manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause interference in which case the user

will be required to correct the interference at his own expense.

WARNING:

Changes or modiﬁcations made to this device which are not expressly approved by the

party responsible for compliance could void the user’s authority to operate the equipment.

Printed on Recycled Paper

Notice

ii 6H122-08 User’s Guide

INDUSTRY CANADA NOTICE

This digital apparatus does not exceed the ClassA limits for radio noise emissions from digital

apparatus set out in the Radio Interference Regulations of the Canadian Department of

Communications.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables

aux appareils numériques de la class A prescrites dans le Règlement sur le brouillage radioélectrique

édicté par le ministère des Communications du Canada.

VCCI NOTICE

This is a Class A product based on the standard of the Voluntary Control Council for Interference by

Information Technology Equipment (VCCI). If this equipment is used in a domestic environment,

radio disturbance may arise. When such trouble occurs, the user may be required to take corrective

actions.

CABLETRON SYSTEMS, INC. PROGRAM LICENSE AGREEMENT

IMPORTANT:

Before utilizing this product, carefully read this License Agreement.

This document is an agreement between you, the end user, and Cabletron Systems, Inc. (“Cabletron”)

that sets forth your rights and obligations with respect to the Cabletron software program (the

“Program”) contained in this package. The Program may be contained in ﬁrmware, chips or other

media. BY UTILIZING THE ENCLOSED PRODUCT,YOU ARE AGREEING TO BECOME

BOUND BY THE TERMS OF THIS AGREEMENT, WHICH INCLUDES THE LICENSE AND

THE LIMITATION OF WARRANTY AND DISCLAIMER OF LIABILITY. IFYOU DO NOT

AGREE TO THE TERMS OF THIS AGREEMENT, PROMPTLY RETURN THE UNUSED

PRODUCT TO THE PLACE OF PURCHASE FOR A FULL REFUND.

Notice

6H122-08 User’s Guide iii

CABLETRON SOFTWARE PROGRAM LICENSE

1. LICENSE. You have the right to use only the one (1) copy of the Program provided in this

package subject to the terms and conditions of this License Agreement.

You may not copy, reproduce or transmit any part of the Program except as permitted by the

2. OTHER RESTRICTIONS. You may not reverse engineer, decompile, or disassemble the

Program.

3. APPLICABLE LAW. This License Agreement shall be interpreted and governed under the laws

and in the state and federal courts of New Hampshire. You accept the personal jurisdiction and

venue of the New Hampshire courts.

EXCLUSION OF WARRANTY AND DISCLAIMER OF LIABILITY

1. EXCLUSION OF WARRANTY. Except as may be specifically provided by Cabletron in

writing, Cabletron makes no warranty, expressed or implied, concerning the Program (including

its documentation and media).

CABLETRON DISCLAIMS ALL WARRANTIES, OTHER THAN THOSE SUPPLIED TO

YOU BY CABLETRON IN WRITING, EITHER EXPRESSED OR IMPLIED, INCLUDING

BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE PROGRAM, THE

ACCOMPANYING WRITTEN MATERIALS, AND ANY ACCOMPANYING HARDWARE.

2. NO LIABILITY FOR CONSEQUENTIAL DAMAGES. IN NO EVENT SHALL

CABLETRON OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER

(INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS,

PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, SPECIAL,

INCIDENTAL, CONSEQUENTIAL, OR RELIANCE DAMAGES, OR OTHER LOSS)

ARISING OUT OF THE USE OR INABILITY TO USE THIS CABLETRON PRODUCT,

EVEN IF CABLETRON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES. BECAUSE SOME STATES DO NOT ALLOW THE EXCLUSION OR

LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, OR

ON THE DURATION OR LIMITATION OF IMPLIED WARRANTIES, IN SOME

INSTANCES THE ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO

YOU.

UNITED STATES GOVERNMENT RESTRICTED RIGHTS

The enclosed product (a) was developed solely at private expense; (b) contains “restricted computer

software” submitted with restricted rights in accordance with Section 52227-19 (a) through (d) of the

Commercial Computer Software - Restricted Rights Clause and its successors, and (c) in all respects

is proprietary data belonging to Cabletron and/or its suppliers.

For Department of Defense units, the product is licensed with “Restricted Rights” as deﬁned in the

DoD Supplement to the Federal Acquisition Regulations, Section 52.227-7013 (c) (1) (ii) and its

successors, and use, duplication, disclosure by the Government is subject to restrictions as set forth in

subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at

252.227-7013. Cabletron Systems, Inc., 35 Industrial Way, Rochester, New Hampshire 03867-0505.

Notice

iv 6H122-08 User’s Guide

DECLARATION OF CONFORMITY

Application of Council Directive(s):

89/336/EEC

73/23/EEC

Manufacturer’s Name:

Cabletron Systems, Inc.

Manufacturer’s Address:

35 Industrial Way

PO Box 5005

Rochester, NH 03867

European Representative Name:

Mr. J. Solari

European Representative Address:

Cabletron Systems Limited

Nexus House, Newbury Business Park

London Road, Newbury

Berkshire RG13 2PZ, England

Conformance to Directive(s)/Product Standards:

EC Directive 89/336/EEC

EC Directive 73/23/EEC

EN 55022

EN 50082-1

EN 60950

Equipment Type/Environment:

Networking Equipment, for use in a

Commercial or Light

Industrial

Environment.

We the undersigned, hereby declare, under our sole responsibility, that the equipment packaged

with this notice conforms to the above directives.

Manufacturer Legal Representative in Europe

Mr. Ronald Fotino Mr. J. Solari

___________________________________ ___________________________________

Full Name Full Name

Principal Compliance Engineer Managing Director - E.M.E.A.

___________________________________ ___________________________________

Title Title

Rochester, NH, USA Newbury, Berkshire, England

___________________________________ ___________________________________

Location Location

6H122-08 User’s Guide v

CONTENTS

CHAPTER 1 INTRODUCTION

1.1 Using This Guide.........................................................................1-1

1.2 Structure of This Guide................................................................1-1

1.3 6H122-08 Overview.....................................................................1-4

1.3.1 Auto-Negotiation.............................................................1-4

1.3.2 Connectivity ....................................................................1-4

1.3.3 Full Duplex Switched Ethernet (FDSE)...........................1-5

1.3.4 Management...................................................................1-5

1.3.5 Switching Options...........................................................1-5

1.3.6 Standards Compatibility..................................................1-5

1.3.7 LANVIEW Diagnostic LEDs............................................1-6

1.3.8 Year 2000 Compliant......................................................1-6

1.3.9 Runtime IP Address Discovery.......................................1-6

1.4 Local Management Features.......................................................1-7

1.4.1 Distributed Chassis Management...................................1-7

1.4.2 Remote Monitoring (RMON)...........................................1-7

1.4.3 Broadcast Suppression...................................................1-7

1.4.4 Port Redirect Function....................................................1-8

1.4.5 SmartTrunk.....................................................................1-8

1.4.6 Additional Local Management Functions........................1-9

1.5 Optional Features........................................................................1-9

1.6 Document Conventions.............................................................1-10

1.7 Getting Help...............................................................................1-11

1.8 Related Manuals........................................................................1-12

CHAPTER 2 NETWORK REQUIREMENTS

2.1 SmartTrunk..................................................................................2-1

2.2 10BASE-T Network .....................................................................2-1

2.3 100BASE-TX Network.................................................................2-2

2.4 100BASE-FX Fiber Optic Network ..............................................2-2

CHAPTER 3 INSTALLATION

3.1 Required Tools............................................................................3-1

3.2 Unpacking the 6H122-08.............................................................3-1

3.3 Installing Options.........................................................................3-2

3.4 Installing the 6H122-08 into the 6C105 Chassis .........................3-2

Contents

vi 6H122-08 User’s Guide

3.5 Connecting to the Network...........................................................3-5

3.5.1 Connecting Twisted Pair Cables to Ports 1 Through 6 ...3-5

3.5.2 Connecting a Twisted Pair Segment to the FE-100TX....3-7

3.5.3 Connecting a Fiber Optic Segment to the

FE-100FX and FE-100F3................................................3-9

3.6 Completing the Installation.........................................................3-11

CHAPTER 4 TROUBLESHOOTING

4.1 Using LANVIEW...........................................................................4-1

4.2 FE-100TX LED.............................................................................4-4

4.3 Troubleshooting Checklist............................................................4-6

4.4 Using the RESET Button .............................................................4-7

CHAPTER 5 LOCAL MANAGEMENT

5.1 Overview......................................................................................5-1

5.2 Local Management Keyboard Conventions.................................5-2

5.3 Management Terminal Setup.......................................................5-3

5.3.1 Console Cable Connection..............................................5-3

5.3.2 Connecting an Uninterruptible Power Supply..................5-5

5.3.3 Management Terminal Setup Parameters ......................5-7

5.4 Accessing Local Management.....................................................5-9

5.4.1 Navigating Local Management Screens........................5-10

5.4.2 Selecting Local Management Menu Screen Items........5-12

5.4.3 Exiting Local Management Screens..............................5-12

5.5 The Main Menu Screen..............................................................5-14

5.6 Chassis Menu Screen................................................................5-15

5.7 Chassis Configuration Screen ...................................................5-16

5.7.1 Setting the IP Address...................................................5-19

5.7.2 Setting the Subnet Mask...............................................5-20

5.7.3 Setting the Chassis Date...............................................5-21

5.7.4 Setting the Chassis Time ..............................................5-21

5.7.5 Entering a New Screen Refresh Time...........................5-22

5.7.6 Setting the Screen Lockout Time..................................5-22

5.7.7 Setting the Operational Mode........................................5-23

5.8 SNMP Community Names Screen.............................................5-24

5.8.1 Establishing Community Names ...................................5-26

5.9 SNMP Traps Screen..................................................................5-27

5.9.1 Configuring the Trap Table............................................5-28

5.10 Chassis Environmental Screen..................................................5-29

5.11 Port Redirect Function Screen...................................................5-30

5.11.1 Displaying the Source and Destination Entries.............5-32

5.11.2 Changing Source and Destination Ports.......................5-33

Contents

6H122-08 User’s Guide vii

5.12 Module Selection Screen...........................................................5-34

5.12.1 Selecting a Module .......................................................5-35

5.13 Module Menu Screen ................................................................5-36

5.14 Module Configuration Menu Screen..........................................5-37

5.15 General Configuration Screen...................................................5-40

5.15.1 Setting the IP Address..................................................5-44

5.15.2 Setting the Subnet Mask...............................................5-45

5.15.3 Setting the Default Gateway.........................................5-46

5.15.4 Setting the TFTP Gateway IP Address.........................5-46

5.15.5 Setting the Module Date ...............................................5-47

5.15.6 Setting the Module Time...............................................5-48

5.15.7 Entering a New Screen Refresh Time ..........................5-48

5.15.8 Setting the Screen Lockout Time..................................5-49

5.15.9 Setting the Operational Mode.......................................5-49

5.15.10Setting the Management Mode.....................................5-50

5.15.11Configuring the COM Port ............................................5-51

5.15.12Changing the Com Port Application..............................5-53

5.15.13Clearing NVRAM ..........................................................5-54

5.15.14Enabling/Disabling IP Fragmentation ...........................5-55

5.16 SNMP Community Names Screen............................................5-55

5.16.1 Establishing Community Names...................................5-57

5.17 SNMP Traps Screen..................................................................5-58

5.17.1 Configuring the Trap Table...........................................5-59

5.18 Switch Configuration Screen.....................................................5-60

5.18.1 Setting the STA.............................................................5-62

5.18.2 Setting the Age Time ....................................................5-63

5.18.3 Setting (Enabling or Disabling) the Port Status ............5-63

5.19 Ethernet Interface Configuration................................................5-64

5.19.1 Configuring an FE-100TX Interface..............................5-66

5.19.2 Setting the FE-100TX Operational Mode......................5-66

5.19.3 Setting the FE-100TX Advertised Ability.......................5-67

5.19.4 Configuring an FE-100FX or FE-100F3

Interface for Port 7 or 8.................................................5-68

5.19.5 Setting the FE-100FX and FE-100F3

in Operational Mode .....................................................5-68

5.20 Module Specific Configuration Menu Screen ............................5-69

5.21 System Resources Screen........................................................5-72

5.21.1 Setting the Reset Peak Utilization ................................5-73

5.22 Flash Download Screen ............................................................5-74

5.22.1 Image File Download Using TFTP................................5-76

5.22.2 Image File Download Using RUNTIME ........................5-77

5.22.3 Image File Download Using BootP...............................5-78

Contents

viii 6H122-08 User’s Guide

5.23 Port Redirect Function Screen...................................................5-78

5.23.1 Changing Source and Destination Ports.......................5-80

5.24 Broadcast Suppression Screen .................................................5-81

5.24.1 Setting the Threshold....................................................5-82

5.24.2 Setting the Reset Peak Switch......................................5-83

5.25 Module Statistics Menu Screen .................................................5-83

5.26 Switch Statistics Screen.............................................................5-85

5.26.1 Using the Clear Counters Command ............................5-86

5.27 The Interface Statistics Screen..................................................5-87

5.27.1 Displaying Interface Statistics .......................................5-90

5.27.2 Using the Clear Counters Command ............................5-90

5.28 RMON Statistics Screen ............................................................5-91

5.28.1 Displaying RMON Statistics ..........................................5-95

5.28.2 Using the Clear Counters Command ............................5-95

5.29 Network Tools............................................................................5-96

5.29.1 Built-in Commands........................................................5-97

5.29.2 Special Commands.....................................................5-106

APPENDIX A SPECIFICATIONS

A.1 Device Specifications..................................................................A-1

A.2 Physical Properties ..................................................................... A-1

A.3 Environmental Requirements...................................................... A-1

A.4 Input/Output Ports....................................................................... A-2

A.5 COM Port Pinout Assignments ................................................... A-2

A.6 Regulatory Compliance............................................................... A-3

APPENDIX B FE-100TX, FE-100FX AND FE-100F3

SPECIFICATIONS

B.1 FE-100TX.................................................................................... B-1

B.2 FE-100FX.................................................................................... B-2

B.3 FE-100F3.................................................................................... B-3

APPENDIX C OPTIONAL INSTALLATIONS AND

MODE SWITCH BANK SETTINGS

C.1 Required Tools............................................................................C-1

C.2 Setting the Mode Switch .............................................................C-1

C.3 Installing Optional Fast Ethernet Interface Modules ...................C-4

INDEX

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Cabletron Systems Changer

Cabletron Systems

Cabletron Systems 2H23-50R Manuel utilisateur

Cabletron Systems

Cabletron Systems Cabletron CyberSWITCH CSX5500 Manuel utilisateur

Cabletron Systems

Cabletron Systems MMAC-Plus 9F206-02 Document technique

Cabletron Systems

Cabletron Systems SmartCell 6A000 Instructions de montage

Cabletron Systems

Cabletron Systems pmn Manuel utilisateur

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Manuel utilisateur

Cabletron Systems

Cabletron Systems 2E43-51 Manuel utilisateur

Cabletron Systems

Cabletron Systems CyberSWITCH CSX1000 Manuel utilisateur

Cabletron Systems

Cabletron Systems SmartSTACK ETHERNET ELS10-27 Manuel utilisateur

Cabletron Systems

Cabletron Systems bridges Manuel utilisateur

Cabletron Systems

Cabletron Systems SmartSwitch 6500 Manuel utilisateur

Cabletron Systems

Cabletron Systems MMAC-Plus 9T125-24 Manuel

Cabletron Systems

Cabletron Systems 9A656-04 Instructions d'installation et d'utilisation

Cabletron Systems

Cabletron Systems SynOptics 3000 Series Manuel utilisateur

Cabletron Systems

Cabletron Systems SmartSTACK ELH100 Manuel utilisateur

Cabletron Systems

Cabletron Systems MicroMMAC-24E Manuel utilisateur

Cabletron Systems

Cabletron Systems 9F120-08 Document technique

Cabletron Systems

Cabletron Systems Cabletron CyberSWITCH CSX5500 Manuel utilisateur

Cabletron Systems

Cabletron Systems TRFMIM 28 TRFMIM-28 Manuel utilisateur

Cabletron Systems

Cabletron Systems SmartSwitch 2500 Manuel utilisateur

Cabletron Systems

Cabletron Systems SmartSwitch 2H22 Manuel du propriétaire

Cabletron Systems

Cabletron Systems VNswitch 900GV Instructions d'utilisation et d'entretien

Cabletron Systems

Cabletron Systems SmartCell 6A000 Manuel utilisateur

Cabletron Systems

Cabletron Systems 9A426-01 Document technique

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur