Brickcom FD-100A Series Manuel utilisateur

Megapixel Day & Night

Fixed Dome Network Camera

FD-100A Series

Quick Installation Guide

Quality Service Group

Read Before You Use

1. Power off the camera device

immediately if it starts smoking or smells

unusual.

2. Power off the camera device

immediately if the camera is exposed to

rain or liquid.

3. Do not set the camera device near any

heat sources. (Ex: television and oven)

4. Keep the camera device away from

direct sunlight.

5. Do not set the camera device over the

specific operating temperature.

6. Do not set the camera device in any wet

and humid environments.

7. Do not set the camera device on

unsteady surfaces.

8. Do not attempt to dismantle the camera

device.

9. Do not drop or hit the camera device.

10. Do not use the camera device when

there is lightning.

1. Check Package Contents

a. FD-100A

b. Power Adapter

c. Product CD

d. Location Sticker

e. Warranty Card

f. Screws bag

g. Quick Guide

2. Device Description

3. System Requirements

Operating System:

Microsoft Windows XP Home Edition SP2

Microsoft Windows XP Professional SP2

Computer:

IBM PC/AT Compatible

CPU:

Pentium 3GHz or faster

Memory:

1024 MB or more

Monitor:

1024 x 768 pixels or more, 24-bit True color or better

Network Interface:

10/100Mbps Network interface card must be installed

Web Browser:

Microsoft Internet Explorer 6.0 SP2 or higher

Adobe Reader:

Adobe Reader 8.0 or higher

Audio:

The audio function will not work if a sound card is not installed in the PC. Audio

may be interrupted depending on network traffic.

4. Hardware Installation

4.1 Remove the dome cover from the camera device.

For ceiling installation:

4.2 The user needs the two screws which are included in the product

package and a screwdriver. Mount the camera on the desired

location and use the screwdriver to tighten the screws clockwise

through the two holes on each side of the device as shown below.

The best place to mount the camera is into a ceiling stud.

WARNING: Do not mount the camera on a soft material. The camera may

fall and be damaged.

For wall installation:

4.3 Chose the location on the wall to place the camera. Attach the

location sticker to the desired spot.

4.4 Drill two holes through the center of the two location holes on the

sticker.

4.5 Hammer the two plastic anchors which are provided in the product

package into the two location holes.

4.6 Mount the camera on the wall and position to two screw slots over the

plastic anchors. Insert the screams into the holes and use the

screwdriver to tighten the screws clockwise until they are secure.

4.7 Place the dome cover back on the camera device.

5. Camera Connection

5.1 Basic Connection (Without PoE)

5.1.1 Connect the power adaptor to the camera device.

5.1.2 Connect the camera to the Ethernet hub using a RJ45 Ethernet

cable.

5.2 Power over Ethernet (PoE) Connection

5.2.1 Connect the camera to a PoE-enabled hub via single Ethernet

cable.

5.2.2 Connect the camera to a non-PoE hub via PoE Injector.

6. Adjust the Lens focus range and zoom viewing

6.1 How to adjust the Lens angle?

6.1.1 Release the pan screw and then rotate the lens to left or right.

After completion, tighten the pan screw.

6.1.2 Release the tilt screw on both side of the device and then rotate

the lens to up or down. After completion, tighten the tilt screw.

6.1.3 Release the video adjustment screw and then adjust the lens

direction. After completion, tighten the video adjustment screw.

Autres manuels pour FD-100A Series

Table des matières

Autres manuels Brickcom Caméra de sécurité

Brickcom

Brickcom PZ-040 12x Series Manuel utilisateur

Brickcom

Brickcom Bullet Series Instructions d'utilisation

Brickcom

Brickcom FB-130Np Series Manuel utilisateur

Brickcom

Brickcom FB-500A series Manuel utilisateur

Brickcom

Brickcom WCB-100A Manuel utilisateur

Brickcom

Brickcom FB-100A Series Manuel utilisateur

Brickcom

Brickcom OSD-040 36x Series Manuel utilisateur

Brickcom

Brickcom Mini Box Series Manuel utilisateur

Brickcom

Brickcom OB-E200Af Instructions d'utilisation

Brickcom

Brickcom VD-130A V2 Series Manuel utilisateur

Brickcom

Brickcom OB-100A V2 series Instructions d'utilisation

Brickcom

Brickcom FD-300Ap series Instructions d'utilisation

Brickcom

Brickcom MD-100A series Manuel utilisateur

Brickcom

Brickcom OB-E200Nf-S Fiche technique

Brickcom

Brickcom Fixed Dome Series Fiche technique

Brickcom

Brickcom OB-E400AF Instructions d'utilisation

Brickcom

Brickcom OSD-040 36x Series Manuel utilisateur

Brickcom

Brickcom OB-E400AF Fiche technique

Brickcom

Brickcom VD-E200Af series Instructions d'utilisation

Brickcom

Brickcom OSD-200 20xp Manuel utilisateur

Brickcom

Brickcom Outdoor Bullet V2 Series Fiche technique

Brickcom

Brickcom VD-130Af Manuel utilisateur

Brickcom

Brickcom Vandal Dome Series Manuel utilisateur

Brickcom

Brickcom Vandal Dome Series Fiche technique

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur