Brickcom OB-500Af V5 Series Fiche technique

Ce manuel convient aux modèles suivants

3

Table des matières

Autres manuels Brickcom Caméra de sécurité

Brickcom

Brickcom Fixed Dome Series Fiche technique

Brickcom

Brickcom MB-500A Series Manuel utilisateur

Brickcom

Brickcom VD-100A Instructions d'utilisation

Brickcom

Brickcom FB-100A Series Manuel utilisateur

Brickcom

Brickcom MD-500Ap Series Instructions d'utilisation

Brickcom

Brickcom MD-300Np-A4-Star Fiche technique

Brickcom

Brickcom FB-100Ae Series Fiche technique

Brickcom

Brickcom FB-H200Np-S-WDRPro Fiche technique

Brickcom

Brickcom FD-100A Series Manuel utilisateur

Brickcom

Brickcom OB-E200Nf-S Fiche technique

Brickcom

Brickcom MD-100A series Manuel utilisateur

Brickcom

Brickcom OB-E400AF Fiche technique

Brickcom

Brickcom FB-100A Series Manuel utilisateur

Brickcom

Brickcom Fixed Box FB-100A Manuel utilisateur

Brickcom

Brickcom Bullet Series Instructions d'utilisation

Brickcom

Brickcom OB-100A Manuel utilisateur

Brickcom

Brickcom OSD-040 36x Series Manuel utilisateur

Brickcom

Brickcom CB-100A Series Manuel utilisateur

Brickcom

Brickcom MD-500Ap Series Manuel utilisateur

Brickcom

Brickcom OB-502Ae V5 Series Instructions d'utilisation

Brickcom

Brickcom OB-500Af Series Fiche technique

Brickcom

Brickcom OSD-200 20xp Manuel utilisateur

Brickcom

Brickcom FB-100Ap Series Instructions d'utilisation

Brickcom

Brickcom PZ-040 12x Series Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur

Easy Installation Guide

Megapixel Day & Night

Bullet Network Camera

OB-500Af V5 Series

OB-300Nf V5 Series

OB-502Ae V5 Series

OB-302Ne V5 Series

English

1

Step 1.Package Contents

Please check to make sure the product package contains all the accessories listed below.

a. Network Camera

b. Screw bag

c. Warranty Card

d. Dry Bag

e. Power Adapter(Optional)

f. Product CD

g. POE (Optional)

2

Step 2.Hardware Installation

WARNING - Do not mount the camera on a soft material. The camera may fall and be

damaged.

A. Wall Installation

a. Drill three holes into the wall and (2) hammer the supplied plastic anchors into the three holes.

(3) Use a screwdriver and the supplied screws to secure the plate to the wall.

b. Connect (1) the POE cable; (2) DC12 Power Connector.

3

Step 3.PoE Connection

For the Power over Ethernet connection, construct the PoE cable using the pin definitions of

the RJ45 connector below and refer to step 5 for instructions on how to install the Water Proof

Connector. Once the PoE cable has been constructed using the waterproof connector, pass

the RJ-45 cable from the camera through the bracket and connect it to the PoE cable.

RJ45 Connector

Pin No.

Function

Pin 1

Transmit Out+ (Tx+)

Pin 2

Transmit Out- (Tx-)

Pin 3

Receive In+ (Rx+)

Pin 4

DC 48V

Pin 5

DC 48V

Pin 6

Receive In- (Rx-)

Pin 7

48V_GND

Pin 8

48V_GND

4.1 Camera Connection

The Bullet Series is DC12V and PoE compliant, so there are two options for connecting the camera to

a power and Ethernet source. The camera can either be connected to a PoE-enabled switch or a

non-PoE switch.

a. If using a PoE-enabled switch:

i. Use a single Ethernet cable to connect the camera to the PoE-enabled switch.

4

b. If using a non-PoE switch:

i. Use a standard RJ-45 cable to connect the camera to a PoE Injector.

ii. Use a standard RJ-45 cable to connect the PoE Injector to the non-PoE switch.

iii. Use a standard power cable to connect the PoE Injector to a power outlet.

If using the DC12V for the power Supply. The RJ45 cable will be data transmission.

Step 4. Install the EasyConfig Software

Insert the CD into the CD-ROM, and follow the instructions of the InstallShield Wizard to finish

installation.

5

Step 5.Launch EasyConfig

Launch the EasyConfig software, and click on the camera from the survey list to connect.

Follow the EasyConfig software to configure the camera’s IP address and EasyLinkTM settings.

Step 6.Installation Completed

Click <Live View> to view the live video feed of the network camera.