BestScope BS-3070 Manuel utilisateur

Wide Field Microscope

BS-3070

Instruction Manual

BS-3070A BS-3070B BS-3070C BS-3070D

This manual is written for stereo microscope BS-3070A,B,C,D. To ensure the safety, obtain

optimum performance and to familiarize yourself fully with the use of this microscope, it is

recommended strongly that you read this manual carefully before using the microscope. Retain

this manual in an easily accessible place near the work desk for future reference.

BestScope International Limited

CONTENTS

Attention .............................................................................................................. 2

Ⅰ.Uses ................................................................................................................. 4

Ⅱ.Principle and Structure .................................................................................... 4

Ⅲ.Main Specification ........................................................................................... 5

Ⅳ.Operation ........................................................................................................ 5

Ⅴ. Instrument Outfit ............................................................................................ 7

Ⅵ. Maintenance .................................................................................................. 8

BestScope International Limited

Attention

1. NO disassembling and uninstall.

It is easy to get an electronic shock and damage the instrument if disassemble and uninstall

freely. Please do not disassemble and uninstall any other accessories freely except that the

instruction mentions they could be disassembled and uninstalled.

2. Check the voltage.

1) The fixed input voltage is marked on the microscope base. Please attention that the local

voltage supply must be accord with it. Or else dismantle the base by the experienced professional,

adjust the power switch marking 110V, 220V to be in accordance with the local voltage, and then

install the base; or you can also contact the factory directly. The microscope must be used within

the rated voltage, otherwise it would be damaged badly.

2) The power socket should have earth wire.

3. Anti-Fire and Scald.

1) During illumination, the bulbs and the illuminator are easy to get hot. Attention not to touch

them in order to avoid hurting the skin.

2) Change the bulb must after it is completely cool down.

3) The easy-burning substance must be kept away from the bulb in order not to get burn.

4. Change Lamp.

1) Before change the bulb, switch off the power supply and pull out the plug of electrical wire

to avoid getting an electrical shock and damaging the instrument.

2) Use the specific halogen bulb, 12V20W or LED lamp.

3) Change the bulb with gloves or wrap the bulbs with the protective cover. Don’t touch the

glass of the bulb directly. Then erase the fingerprint and spots with the alcohol. Otherwise the bulb

is easy to get split and weaken the brightness.

5. Move and Dispose.

1) Switch off the power supply before move the instrument.

2) Moving and disposing environment requirement:

a) Environment temperature:- 40°C～+55°C.

b) The maximum relative humidity: 95%.

3) Avoid disposing the instrument in the sun or the room lights. The bright environment will

affect the quality of the image.

BestScope International Limited

4) Don’t dispose with dirt around. When not use, cover it by dust cover.

5) The place must be shaking-proof when dispose.

6. Working Environment.

1) Indoor temperature: 0～40°C.

2) The maximum relative humidity: 85%.

3) Running mode: continuous.

7. Operating Carefully.

1) The microscope is a sophisticated and precise optic instrument. Shaking heavily and

operating rigidly will damage the instrument badly. Don’t reverse the left and right coarse focusing

knob. Otherwise the focusing will lost its precision.

2) Don’t touch the surface of the optic accessories or else the image would not be clear.

BestScope International Limited

Ⅰ. Uses

BS-3070 is a new type of microscope with a special wide field of viewing. It can form a clear

and sharp image with a strong stereo sense of sight, be comfortably viewed and conveniently

operated. It is widely used in all kinds of fields such as biology anatomizing. electronic industry,

mineral investigating, cultural relic restoration and so on.

Ⅱ. Principle and Structure

1. Optical Principle:

After the object formed an image by the objective, the bundle of imaging rays is divided into

two proportion, respectively passing through two reflectors with spherical reflecting surface,

then forming an enlarged, upright virtual image viewed by the eyepiece.

2. Instrument Structure:

(1) ’G’shape clamp (2) tightening screw (3) Stand

BestScope International Limited

(4) Screw cap (5) joint dowel (6) dust proof cover

(7) Knob for adjusting the interpupillary distance

(8) Main body (9) Knob for adjusting illumination

(10) Objective (11) Nosepiece (12) Protective baffle

Ⅲ. Main Specification

1. Eyepiece:

2. Objectives: standard: 2×,4×,6×, optional: 8×,10×, 15×, 6×(SL)

3. Characteristic:

Objective

Magnification

Working distance

(mm)

Field Of Viewing For

Object Space(mm)

2× 208 68

4× 98 34

6× 80 22.7

8× 58 17

10× 46 13.6

15× 50 9.1

6×(SL) 115 22.7

4. Illumination:Input voltage:AC110V-AC220V

Output: (1) Standard: LED lamp (1pc)

(2) Optional: 12V20W halogen lamp with cup (2 pcs.)

Ⅳ. Operation

1. Installation:

Take out the stand (3) from the packing box and fix it on the worktable by the ‘G’ shape clamp.

Take out the main body (8) from the other package and secure it on the stand (3), using the joint

dowel (5) and screwing the screw cap (4) tightened. Then put the dustproof cover (7) in place on

the main body (8) Turn the main body to a proper position for viewing and tighten the tightening

BestScope International Limited

screw (2), then mount the objectives onto the nosepiece.

2. Mounting and changing the lamps:

Before using the microscope, please first mount the lamps. Gently press the finger-shape

protrusion on the protective baffle (12) and take out the protective baffle (12) from the

illuminating hole, insert the lamp straight into the socket as far as it will go. Only use halogen

lamps of the specified rating. Replace the protective baffle (12) , Do not touch the glass part of a

lamp with your bare hands as your fingerprints may stick to the lamp, possibly reducing its level of

light output or causing damage to the lamp.

When changing the lamps, please pull down the plug of the electrical wire before changing it.

Change the lamp after it is cool enough. Press the finger-shape protrusion on the protective baffle

(12) lightly and take out the protective baffle (12) from the illuminating hole. Replace the bulb with

the new one; then remount the protective baffle (12) into the illuminating hole. During changing

the bulb, note not to directly touch the glass portion of the bulb and the protective baffle by hand

but to wear glove or use sheath. After finishing, wipe off the fingerprint and smudge on the glass

with the soft clean cloth dampened with absolute alcohol. Otherwise the bulb is easy to get split

and weaken the brightness of the whole illumination system.

3. Checking the input voltage:

The rated input voltage is indicated in the electric nameplate attached to the back of the arm.

In the case of the voltage of the local power supply according with the rated value, connect up the

power supply. The electric socket must have earthing.

4. Adjusting the illumination:

The illumination consists of a LED lamp or two halogen lamps with cup which form an angle

tilting each other. Rotate the knob for adjusting the illumination (9) to change the angle tilting each

other so as to get the ideal condition of illuminating.

5. Selecting the objectives magnification:

The microscope is equipped with various objectives for 2×,4×,6×magnification. The objective

with the lower magnification takes on the larger field of view and depth of field. In order to find

the object easily, advise to use first the lower magnification objective; then rotate the nosepiece

for 120 degree to change the objective magnification.

6. Adjusting the interpupillary distance:

According to the interpupillary distance of viewers, rotate the knob for adjusting the interpupillary

BestScope International Limited

distance (7) to assure that the beams emerging from the microscope coincide with the eyes of the

viewer. The the images in the left eye and right eye of the viewer concentrate into a sharp image.

7. Focusing:

Viewing the object by the eyepiece with uplifting or driving down the main body gently, then

get a clearer and sharper image. Rotate the knob for adjusting the interpupillary distance (7) to

make the beams from the microscope coincide with the pupils of the viewers, and then get an

ideal magnified image.

Ⅴ. Instrument Outfit

Component Name Quantity

Main body 1

Stand 1

‘G’ shape clamp 1

Objectives

2× 1

4× 1

6× 1

LED lamp 1

0.5A fuse (spare) 1

Lens paper 1

Instruction manual 1

Packing list 1

Inspection certificate 1

Optional accessories: 8×,10×,15×, 6×(SL) objectives

BestScope International Limited

Ⅵ. Maintenance

1. Not using the microscope:

Pull out the plug of power supply wire and cover the instrument with the dust proof cover,

then keep it in a dry and cool place.

2. Cleaning the lens:

Don’t touch the optical parts by hand.

Had better clean out the dust with the soft brush or gauze.

For stubborn smudge, such as fingerprint and lipid, etc, gently wipe it off with the clean soft

cloth or lens paper dampened with the mixture of absolute alcohol and ether.

3. Cleaning the plastic surface and metal paint surface:

Don’t use any diluter (such as thinner, etc.) to clean the surfaces. If there are some smudges on

the surfaces, wipe it off by the gauze. For the obstinate smudges, suggest using the soft

cleanser to clean.

For the plastic surfaces, only can use the soft cloth dampened with water to clean. With the

technology development, we maintain the right to do some improvement. So the book can not

completely express the machine characteristic.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels BestScope Microscope

BestScope

BestScope BS-2081L Manuel utilisateur

BestScope

BestScope BS-3030 Series Manuel utilisateur

BestScope

BestScope BS-6020RF Manuel utilisateur

BestScope

BestScope BS-3044 Manuel utilisateur

BestScope

BestScope BLM-210 Manuel utilisateur

BestScope

BestScope BS-2094C Manuel utilisateur

BestScope

BestScope BS-6000A Manuel utilisateur

BestScope

BestScope BS-5040B Manuel utilisateur

BestScope

BestScope BS-6045 Manuel utilisateur

BestScope

BestScope BLM-205 Manuel utilisateur

BestScope

BestScope BS-2023B Manuel utilisateur

BestScope

BestScope BS-2030MH4A Manuel utilisateur

BestScope

BestScope BS-2093B Series Manuel utilisateur

BestScope

BestScope BS-5095 Manuel utilisateur

BestScope

BestScope BS-3012 Series Manuel utilisateur

BestScope

BestScope BS-2080MH10 Manuel utilisateur

BestScope

BestScope BS-3035 Series Manuel utilisateur

BestScope

BestScope BS-2094 Series Manuel utilisateur

BestScope

BestScope BS-2040BD Manuel utilisateur

BestScope

BestScope BS-5070B Manuel utilisateur

BestScope

BestScope BS-2020BD(300) Manuel utilisateur

BestScope

BestScope BS-2022 Series Manuel utilisateur

BestScope

BestScope BS-2040FB(LED) Manuel utilisateur

BestScope

BestScope BS-2042 Series Manuel utilisateur

Manuels Microscope populaires d'autres marques

Thermo Scientific

Thermo Scientific Nicolet iN10 Mode d’emploi

National

National DC3-163 Manuel utilisateur

KERN Optics

KERN Optics OPE-1 Manuel utilisateur

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Manuel utilisateur

Prior

Prior Lux POL Manuel utilisateur

Opitec

Opitec Smartscoop 115615 Manuel utilisateur

KERN

KERN OPO-1 Manuel utilisateur

Topcon

Topcon SP-1P Manuel utilisateur

Motic

Motic PA43 Manuel utilisateur

Leica

Leica DVM5000 Guide de l'utilisateur

MshOt

MshOt MZ62 Manuel utilisateur

KERN Optics

KERN Optics OZR-5 Manuel utilisateur

VWR

VWR VisiScope 384 Series Manuel utilisateur

Nikon

Nikon ECLIPSE E200 POL Manuel utilisateur

Leica

Leica DI C800 Manuel

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manuel utilisateur

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manuel utilisateur

Olympus

Olympus SZ61 Manuel utilisateur