BestScope BS-2036 Series Manuel utilisateur

Biological Microscope

Model: BS-2036 Series

Instruction Manual

This manual is written for BS-2036 Series biological microscope. To ensure the safety, obtain

optimum performance and to familiarize you fully with the use of this microscope, it is

recommended strongly that you study this manual thoroughly before using the microscope and

retain this manual in an easily accessible place near the work desk for future reference.

BestScope International Limited

-１-

CONTENTS

Purpose

………………………………………………………………

1. Parts Name

………………………………………………………………

2. Specifications

………………………………………………………………

3. Installation

………………………………………………………………

4. Operation

………………………………………………………………

5. Image Capture

………………………………………………………………

6. Maintenance

………………………………………………………………

7. Troubleshooting

………………………………………………………………

8. Outfits

………………………………………………………………

BS-2036 series biological microscopes

are designed for college teaching,

Medical and clinical identification. The

microscope with modern design, steady

structure, convenient operation and

clear image is suitable for observing

various biological specimens, they are

mostly applied in colleges and

hospitals.

BestScope International Limited

-２-

1. Parts Name

2. Specifications

①

②

C_③

④

D_⑤

E_⑥

⑦

⑧

①

Eyepiece

②

Objective

③

Clamp

④

Mechanical Stage

⑤

Condenser

⑥

Light Collector

⑦

Main Body

⑧

Seidentopf

Binocular Head

(Trinocular Head)

⑨{

Power Input

Fuse

⑨

Diopter Adjustment Ring

Nosepiece

Clamp Handle

Handle of Iris Aperture Diaphragm

Field Diaphragm Ring

Body Handle

Head Fixing Screw

Mechanical Stage Moving Knob

Right Coarse & Fine Focusing Knobs

Potentiometer

Power Switch

Condenser Focusing Knob

Tension Adjustment Ring

Left Coarse & Fine Focusing Knobs

BestScope International Limited

-３-

2.1 Total magnifications

Objective

Total Magnifications

Eyepiece

10X

20X

(Optional)

40X

100X

10X

40X

100X

200X

400X

1000X

16X

64X

160X

320X

640X

1600X

2.2 Objectives

BS-2036A, BS-2036AT

Achromatic Objective

Numerical

Aperture (N.A.)

Objective

Field

Resolving

Power

Working

Distance

0.10

4.5mm

2.8µm

13mm

10X

0.25

1.8mm

1.1µm

6.3mm

20X (S) (Optional)

0.40

0.9mm

0.69µm

0.82mm

40X (S)

0.65

0.45mm

0.42µm

0.44mm

100X (Oil) (S)

1.25

0.18mm

0.22µm

0.3mm

BS-2036B, BS-2036BT

Plan Objective

Numerical

Aperture (N.A.)

Objective

Field

Resolving

Power

Working

Distance

0.10

5mm

2.8µm

16mm

10X

0.25

2mm

1.1µm

2mm

20X (S) (Optional)

0.40

1mm

0.69µm

1.1mm

40X (S)

0.65

0.5mm

0.42µm

0.66mm

100X (Oil) (S)

1.25

0.2mm

0.22µm

0.42mm

BS-2036C, BS-2036CT

Infinite E-Plan

Objectives

Numerical

Aperture (N.A.)

Objective

Field

Resolving

Power

Working

Distance

0.10

5mm

2.8µm

6.73mm

10X

0.25

2mm

1.1µm

4.19mm

20X (S) (Optional)

0.40

1mm

0.69µm

2.14mm

40X (S)

0.65

0.5mm

0.42µm

0.45mm

100X (Oil) (S)

1.25

0.2mm

0.22µm

0.12mm

BS-2036D, BS-2036DT

Infinite Plan

Objectives

Numerical

Aperture (N.A.)

Objective

Field

Resolving

Power

Working

Distance

0.10

5mm

2.8µm

12.1mm

10X

0.25

2mm

1.1µm

4.64mm

20X (S) (Optional)

0.40

1mm

0.69µm

2.41mm

40X (S)

0.65

0.5mm

0.42µm

0.65mm

100X (Oil) (S)

1.25

0.2mm

0.22µm

0.12mm

BestScope International Limited

-４-

Condenser

screw

Condenser

installing ring

Condenser

2.3 The other specification

2.3.1 Mechanical tube length: 160mm

2.3.2 Conjugate distance: Infinity (Non- Infinity: 195mm)

2.3.3 Head: Seidentopf Binocular or Trinocular, Inclined 30°, Rotatable 360°, Anti-fungal

systems. Interpupillary Adjustable Distance Is 48-75mm, Diopter adjustable range ±5.

2.3.4 Nosepiece: Quadplex nosepiece

2.3.5 Mechanical stage: Size 145mm×140mm, X-Y travel 76mm×52mm

2.3.6 Focusing systems: Coaxial Coarse and Fine Focusing Knobs, Coarse stroke 26mm,

Fine division 2µm, Condenser up-down range 22mm

2.3.7 Condenser: Abbe condenser, N.A. 1.25, Adjustable aperture, Aperture center can be

adjustable.

2.3.8 Illumination: Non-spherical System

2.3.9 Filter: Built in blue filer

2.3.10 Electric components: Input voltage AC85-265V/LED AC170-270V, 50/60Hz

Output voltage DC1.2-6V/LED, DC0.4-3.5V 6V/20W halogen lamp

Rotation potentiometer with power switch,

Fuse 2A ф5×20

3. Installation

Please clean the operation desk before installation. Put

out the microscope of the carton and put it on the desk.

Make sure the supply voltage meets the instrument’s

requirement and the power switch is off.

Installation Instruction Fig.:

1.Turn the binocular (trinocular) head to working

position;

2.Put out the dust cover of the eyepiece tube;

3.Insert into the eyepiece;

4.Install Abbe Condenser

3.1 Eyepiece Tube:

Loose the Head Fixing Screw G, turn the tube to

observing position, then tighten the Screw G.

3.2 Put out the eyepiece dust cover.

3.3 Eyepiece

Put out the eyepiece of the carton, and insert it into the tube. Please don’t touch the lens of the

BestScope International Limited

-５-

eyepiece by hand.

3.4 Condenser

Put out the condenser of the carton, then turn Condenser Focusing Knob M to lower condenser

installing ring. Loose the condenser screw, then install the condenser, and make the condenser

graduation face to the front, Tighten the condenser screw, and higher the condenser installing ring

to top. Please don’t touch the lens by hand.

3.5 Power

Put in power, open Switch, and turn Potentiometer.

4. Operation

4.1 Bright field operation process instruction

5) Adjust condenser aperture

diaphragm

Adjust condenser ⑤(condenser focusing

screw M) and aperture (Aperture diaphragm

lever D)

Observing

1) Turn power switch,

adjust light

Turn on Switch L, and turn Potentiometer K.

2) Put the sample

Put the sample on stage ④, (open the clamp

C, and put the sample into it), turn stage knob

H to put the sample into optical path.

3) Put 10X objective into

optical path and focus

Turn Nosepiece B, put 10×objective into

optical path. Turn Coarse & Fine Focusing

Knobs I and N to focus.

4) Adjust interpupillary

distance and diopter

Adjust head ⑧to make two fields into one;

adjust diopter adjuster A to make diopter for

two eyes same.

6) Adjust and center field

diaphragm

Adjust field diaphragm

(field diaphragm ring E)

Put the objective into

light path, and focus

BestScope International Limited

-６-

5. Image Capture

5.1 Installing

Connect the C-mount with CCD camera or connect camera with camera adapter, then connect it

with c-mount, finally put it into microscope.

5.2 Using

First get a clear image from eyepiece, then put out lever on the side of trinocular head, and collect

image with camera. Clear image should be in screen. Adjust B14 fine focusing knobs to get it clear if

image is not clear.

6. Maintenance

6.1 Clean microscope

6.1.1 Don’t touch the lens with hand, Dust on lens should be cleaned by soft brush or absorbent

cotton or cleaned by absorbent cotton, lens paper with the mixture of alcohol and ether

(proportion 1:4).

6.1.2 Alcohol and ether all are burnt early, please take them away from fire. Be careful for turn on

and off power.

6.1.3 Don’t clean painted metal and galvanizing metal with organic solvent such as alcohol, ether or

the mixture of the both. Silicon cloth or soft cleaning preparation is suggested to clean it.

6.1.4 Plastic should be cleaned by soft cloth with clear water.

6.2 Environment of using and placing

6.2.1 Microscope should be used and placed in a cool, dry, non-dust, non-shake and non-corrosive

gases environment.

6.2.2 Microscope should be used in environment of indoor temperature 0°-40°C and maximum

relative humidity 85%.

6.2.3 Removing equipment is suggested to be installed when microscope used in heavy humidity

area to avoid fungus and mist damage instrument.

6.2.4 Please pay attention to prevent microscope from violent shake and vibration in application

and in carrying. Don’t drag it on the surface of worktable to avoid damage to microscope and

worktable.

6.3 Replacement of bulb

6.3.1 Turn off power, and pull out plug.

6.3.2 Wait the bulb become cool.

▲Please be sure that the bulb is cool, then follow

by the nest operations.

6.3.3 Lay aside the microscope reliably, unscrew the

knurled thumb screw of the lamp housing cover on

the underside of base.

6.3.4 Pull over the lamp housing cover.

6.3.5 Pull out the bulb should be replaced, hold a new bulb with silk cloth to avoid fingerprint and

BestScope International Limited

-７-

dust affect bulb brightness and service life, and insert fully the contact pins into the bulb socket.

6.3.6 Close the lamp housing cover, and screw the knurled thumb screw.

▲After working for above 10 hours continuously,

better cut off the microscope about 30 minutes.

6.4 Replacement of fuse

6.4.1 Cut off power of microscope, and pull out the

plug.

6.4.2 Unscrew fuse cap in the back of base, take out

old fuse.

6.4.3 Replace a new fuse, then screw the fuse cap.

7. Trouble shooting

In the period of using this series microscope, if there is any trouble occurs, please referring to the

following sheet listed some common troubleshooting resolve them.

Trouble

Causation

Remedy

Switch on but bulb dark

Plug is unreliable

Plug in again

Bulb is broken

Change bulb

Fuse is broken

Change fuse

Bulb is flickering or

brightness is unsteady

Bulb is unstable

Insert it again

Bulb is broken

Replacing bulb

Brightness of view field

isn’t enough or is

Uneven

Bulb specification doesn’t meet

the requirement

Replacing bulb

Brightness isn’t adjusted

correctly

Adjust rotation

potentiometer

Objective isn’t in correct

position

Make the objective in correct

position

The size of iris aperture is too

small

Adjust the size of iris aperture

Brightness of view field

isn’t enough or is

Uneven

Lens(objective,eyepiece,

condenser, light collector

)

has

dust

Clean it

Position of condenser is too low

Higher condenser

Image isn’t clear

(contrast or definition

isn’t enough)

Cover glass of specimen doesn’t

meet the requirement

Use required thickness cover glass

(0.17mm)

Cover glass of specimen isn’t in

up direction

Place specimen correctly

Surface of objective lens

isdirty (especially it is easy for

the front lens of 40X objective to

dip in immersion oil)

Clean it

Immersion oil isn’t used for 100X

objective (oil)

Use immersion oil

Immersion oil doesn’t meet the

requirement

Use immersion oil

supplied by us

There is bubble in immersion oil

Clear the bubble way

BestScope International Limited

-８-

Trouble

Causation

Remedy

Size of iris aperture isn’t proper

Adjust the size of iris aperture

Position of condenser is too low

Readjust the position of

condenser

One side of image is

dark or image is

moving as focusing

Objective isn’t in correct position

Make the objective in

correct position

Specimen isn’t placed correctly

Place specimen levelly on

stage and

clip it with clamp

Objective touches

specimen as changing

low times objective to

high times objective

Cover glass of specimen isn’t in

up direction

Place specimen correctly

Cover glass doesn’t meet the

requirement

Use required thickness

cover glass (0.17mm)

Image observed by two

eyes aren’t in

superposition entirely.

Interpupilary distance isn’t

adjusted correctly

Adjust interpupilary

distance according to two eyes

It is easy for eyes to be

tired during observing

Diopter isn’t adjusted correctly

Readjust diopter

8. Outfits

Items

Specification

BS-2036

Eyepiece

WF 10×-18 mm

●

WF 10×-20mm

●

WF16×-13mm

○

Reticule Eyepiece WF 10×-18 mm

(Reticule 0.1mm)

○

Reticule Eyepiece WF 10×-20mm

(Reticule 0.1mm)

○

Achromatic

Objective

4×

●

10×

●

20×

○

40×(S)

●

100×/1.25 (Oil) (S)

●

Plan

Objective

4×

●

10×

●

40×/0.65 (S)

○

100×/1.25 (Oil) (S)

●

Infinite

E-Plan

Objectives

4×

●

10×

●

20×

○

40× (S)

●

100× (Oil) (S)

●

Infinite Plan

Achromatic

Objective

4×

●

10×

●

20×

○

40× (S)

●

60x(S)

○

BestScope International Limited

-９-

100× (Oil) (S)

●

Seidentopf

Binocular

Head

Inclined 30°, Rotatable 360°,

Interpupilary Distance: 48-75mm

●

Seidentopf

Binocular

Head (For

Infinite

System)

Inclined 30°, Rotatable 360°,

Interpupilary Distance: 48-75mm

●

Trinocular

Head

Inclined 30°, Rotatable 360°,

Interpupilary Distance 48-75mm,

Light Distribution: 20:80

○

Trinocular

Head (For

Infinite

System)

Inclined 30°, Rotatable 360°,

Interpupilary Distance 48-75mm,

Light Distribution: 20:80

○

Nosepiece

Quadplex

●

Mechanical

Stage

Stage Size: 145X140mm

Travel: 76mmX52mm

Coaxial Coarse and Fine Focusing

Knobs

●

Condenser

Abbe N.A. 1.25

(Iris Diaphragm)

●

Illumination

3W LED Illumination Systems,

Brightness Adjustable

●

6V/20W Halogen Lamp, Brightness

Adjustable

○

Filter

Blue

○

Green

○

Yellow

○

NOTE：● Standard，○ Optional

Packing Size: 420mm × 275mm × 450mm

Gross Weight: 7.5 kgs Net Weight: 6.5 kgs

Table des matières

Autres manuels BestScope Microscope

BestScope

BestScope BS-2081L Manuel utilisateur

BestScope

BestScope BS-3044 Manuel utilisateur

BestScope

BestScope BS-6010R Manuel utilisateur

BestScope

BestScope BS-2030MH4A Manuel utilisateur

BestScope

BestScope BS-2052BDBD Manuel utilisateur

BestScope

BestScope BS-5070B Manuel utilisateur

BestScope

BestScope BS-4000A Manuel utilisateur

BestScope

BestScope BS-2010MD Manuel utilisateur

BestScope

BestScope BS-2052 Series Manuel utilisateur

BestScope

BestScope BS-2081F Manuel utilisateur

BestScope

BestScope BS-2005 Series Manuel utilisateur

BestScope

BestScope BS-6002 Series Manuel utilisateur

BestScope

BestScope BLM-210 Manuel utilisateur

BestScope

BestScope BS-2092 Manuel utilisateur

BestScope

BestScope BS-2080F(LED) Manuel utilisateur

BestScope

BestScope BS-2081 Manuel utilisateur

BestScope

BestScope BS-2036F2B(LED) Manuel utilisateur

BestScope

BestScope BS-3030 Series Manuel utilisateur

BestScope

BestScope BS-2053 Series Manuel utilisateur

BestScope

BestScope BS-6045 Manuel utilisateur

BestScope

BestScope BS-8060B Manuel utilisateur

BestScope

BestScope BS-2040B Manuel utilisateur

BestScope

BestScope BS-6020DRF Manuel utilisateur

BestScope

BestScope BS-3010A Manuel utilisateur

Manuels Microscope populaires d'autres marques

Thermo Scientific

Thermo Scientific Nicolet iN10 Mode d’emploi

National

National DC3-163 Manuel utilisateur

KERN Optics

KERN Optics OPE-1 Manuel utilisateur

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Manuel utilisateur

Prior

Prior Lux POL Manuel utilisateur

Opitec

Opitec Smartscoop 115615 Manuel utilisateur

KERN

KERN OPO-1 Manuel utilisateur

Topcon

Topcon SP-1P Manuel utilisateur

Motic

Motic PA43 Manuel utilisateur

Leica

Leica DVM5000 Guide de l'utilisateur

MshOt

MshOt MZ62 Manuel utilisateur

KERN Optics

KERN Optics OZR-5 Manuel utilisateur

VWR

VWR VisiScope 384 Series Manuel utilisateur

Nikon

Nikon ECLIPSE E200 POL Manuel utilisateur

Leica

Leica DI C800 Manuel

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manuel utilisateur

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manuel utilisateur

Olympus

Olympus SZ61 Manuel utilisateur