BestScope BS-6045 Manuel utilisateur

Research Metallographic Microscope

Model Number: BS-6045

Instruction Manual

This instruction manual applies to the BS-6045 research metallographic microscope. In order to ensure safety,

maximize the performance of the instrument, and make you fully familiar with the use of this microscope, we

recommend that you read this manual thoroughly and carefully before operating the microscope.

BestScope International Limited

Warning and Caution Symbols Used in This Manual

The company provides you with the most safe and reliable instruments, but incorrect use and neglect of the

precautions in the manual may cause personal injury and property damage. It is hoped that before you use the

product, please read this manual carefully to ensure the correctness of use. In addition, please keep the manual in

a place where you can easily read it at any time for real-time query.

In this manual, safety matters will be emphasized with the following symbols, please be sure to follow the

instructions with these symbols.

The meaning of the logo on the product

logo

meaning

Protective conductor terminal

careful. scald! You are reminded of the following situations:

The lighting room and its surrounding area can become hot when in use. Do not touch

the lighting room while it is on or for thirty minutes after it is turned off. Even after the

light housing is turned off, the light housing and its surroundings are still very hot, so

make sure to allow sufficient cooling time before replacing the bulb

This symbol appears on the nameplate of the appliance, reminding you to confirm that

the input voltage is consistent with the power supply voltage in your area

Turn on the power. Turn the brightness knob to adjust the brightness of the field of view

Turn off the power

UV radiation

The instrument needs to be disconnected from the power supply before turning on

logo

meaning

Warning

Ignoring this warning could result in serious personal injury or even death

Notice

Ignoring this notice may result in personal injury or property damage

BestScope International Limited

BS-6045

Content

Safety Precautions ............................................................................................................................ 3

XD-202 Inverted Biological Microscope

Ⅰ. Structure and name ............................................................................................................... 5

Ⅱ. Application ................................................................................................................................... 7

Ⅲ. Installation ................................................................................................................................... 7

Ⅳ. Use and adjustment ................................................................................................................... 12

Ⅴ. Microscope observation ............................................................................................................. 16

VI. Microphotography...................................................................................................................... 21

VII. Technical Specifications ............................................................................................................ 22

Ⅷ. BS-6045 Configuration Diagram ................................................................................................. 24

IX. TROUBLESHOOTING LIST ............................................................................................................. 25

Ⅹ. Maintenance and Maintenance ...................................................................................................27

Ⅺ. Product Standard .....................................................................................................................27

XII. COMPANY INFORMATION ........................................................................................................... 27

BestScope International Limited

BS-6045

Safety Precautions

1. Avoid placing the microscope in places exposed to direct sunlight, high temperature or humidity, dusty, and

subject to strong vibrations, and ensure that the worktable is flat, level and strong enough. (Weight: about 29.5 kg

for the main unit).

2. If it is necessary to move the microscope, hold the transport handle tightly and keep the microscope and the

work surface with a gap before moving the microscope (above).

3. If bacterial solution or water splashes on the stage, objective lens or observation tube, unplug the power cord

immediately and wipe off the spilled liquid or water. Otherwise, the instrument may be damaged.

When working, the lamp house will become very hot. Make sure there is enough space for heat

dissipation around the lamp house, otherwise heat will accumulate and the instrument will be damaged.

5. Before turning on power to the lamp house, make sure that the correct power source is connected. Before

replacing the bulb or fuse, switch off the power supply. Wait for the lamp chamber to cool down completely before

proceeding.

Transport Handle

Lamp House

BestScope International Limited

BS-6045

★Specified bulb: 12V 100W HAL high brightness halogen bulb (OSRAM)

★Use a fuse that can load the correct fuse current, and must not use a temporary fuse to prevent the power

supply from being cut off.

6. Connect the power cord correctly to ensure that the instrument is grounded to avoid lightning strikes.

7. Use the special power cord provided by our company.

8. This product should be stored in a sheltered place without acid gas, alkali, organic solvent and other

harmful substances around.

★For safety, this machine is equipped with a three-pin grounding plug, and the grounding is protected by the

three -pin grounding plug. Do not use any adapter plugs that reduce safety.

★Do not place the device in a position where it is difficult to operate and disconnect the current.

★If the equipment is used in a manner not specified by the company, the protection provided by the

equipment may be impaired.

BestScope International Limited

BS-6045

Ⅰ. Structure and Name

Figure 1

BestScope International Limited

BS-6045

Part name:

1 Power switch

2 Left camera port

3 Left coarse / fine focus handwheel

4 Side port converter (optical path conversion --- left and right port / observation)

5 Eyepieces

6 Trinocular Tube

7 Brightness adjustment knob

8 Lighting Room Switches

9 Lighting shutter switch

10 Right coarse / fine focus handwheel

11 Intermediate magnification rate converters

12 Right camera port

13 Stage X/Y axis handwheel

14 Multifunctional module turntable

15 Field diaphragm

16 Aperture diaphragm

17 Three-hole color filter insert

18 Nosepieces

19 Stage

BestScope International Limited

BS-6045

Ⅱ. Application

The BS-6045 inverted metallographic microscope is mainly used to study the surface of various substances

under reflected light.

This machine can be used for observation of bright field, dark field, phase contrast, differential interference

contrast, polarized light, etc.

Main applications of this machine: The identification and analysis of the structure of various metals and

alloys is a right-hand man in the field of scientific research and teaching.

Ⅲ. Installation

1. Preparations before installing and operating the microscope

Remove the packaging of the main unit and all parts and accessories.

The package includes the main unit, trinocular tube, eyepiece, objective lens, lighting chamber, etc., as well as

other accessories and accessories, such as filters, differential interference accessories, dust cover, tools,

instructions, etc. Each optional accessory will be packaged separately.

(1) Remove all packaging and check to confirm that it is consistent with the product you purchased.

(2) According to the prompt in Figure 2, remove the transport handle for subsequent microscope operations.

Place the main unit on a horizontal shock-proof workbench, and then use a 4mm hexagon screwdriver to

remove the transport handle.

★Please keep the removed handle properly.

Transport Handle

Main Body

Figure 2

BestScope International Limited

BS-6045

2. Installation

(1) Trinocular tube

①Use a 2mm hexagon screwdriver to loosen the mounting screws and remove

Dust cover.

②Align the trinocular tube with the dovetail mount, and then use a 2mm hexagon

Screwdriver fixed.

★Please stabilize the trinocular tube to avoid falling and lowering the instrument

performance of the device.

(2) Eyepiece and centering telescope

①Remove the dust cap of the lens barrel, and insert the two eyepieces into the lens barrel (the mounting end

face of the eyepiece is in complete contact with the end face of the lens barrel).

Figure 3

Trinocular head installation

screw

Trinocular

head

Trinocular head installation dovetail

BestScope International Limited

BS-6045

(3) Reticle eyepiece

If the reticle is added to the eyepiece, it may cause slight image shift, The diopter adjustment ring can be rotated

to focus the eyepiece reticle.

To replace the reticle, simply unscrew the reticle holder.

Figure 4

Figure 5

Eyepiece Dust Cap

Eyepiece

0 diopter

0 point

Diopter adjustment ring

Eyepiece Micrometer

Eyepiece micrometer holder

Table des matières

Autres manuels BestScope Microscope

BestScope

BestScope BS-2036 Series Manuel utilisateur

BestScope

BestScope BS-3044 Manuel utilisateur

BestScope

BestScope BS-2080F(LED) Manuel utilisateur

BestScope

BestScope BS-3060A Manuel utilisateur

BestScope

BestScope BS-2040FB(LED) Manuel utilisateur

BestScope

BestScope BS-2081 Manuel utilisateur

BestScope

BestScope BS-2025M Manuel utilisateur

BestScope

BestScope BLM-210 Manuel utilisateur

BestScope

BestScope BS-2040BD Manuel utilisateur

BestScope

BestScope BS-8030B Manuel utilisateur

BestScope

BestScope BS-3015 Series Manuel utilisateur

BestScope

BestScope BS-2046 Manuel utilisateur

BestScope

BestScope BS-2023B Manuel utilisateur

BestScope

BestScope BS-5095 Manuel utilisateur

BestScope

BestScope BPM-620 Manuel utilisateur

BestScope

BestScope BS-2042 Series Manuel utilisateur

BestScope

BestScope BS-8060B Manuel utilisateur

BestScope

BestScope BS-2030MH10 Manuel utilisateur

BestScope

BestScope BS-2030MH4A Manuel utilisateur

BestScope

BestScope BS-2036F2B(LED) Manuel utilisateur

BestScope

BestScope BLM-205 Manuel utilisateur

BestScope

BestScope BS-2030B Manuel utilisateur

BestScope

BestScope BS-6030 Manuel utilisateur

BestScope

BestScope BS-6010R Manuel utilisateur

Manuels Microscope populaires d'autres marques

Thermo Scientific

Thermo Scientific Nicolet iN10 Mode d’emploi

National

National DC3-163 Manuel utilisateur

KERN Optics

KERN Optics OPE-1 Manuel utilisateur

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Manuel utilisateur

Prior

Prior Lux POL Manuel utilisateur

Opitec

Opitec Smartscoop 115615 Manuel utilisateur

KERN

KERN OPO-1 Manuel utilisateur

Topcon

Topcon SP-1P Manuel utilisateur

Motic

Motic PA43 Manuel utilisateur

Leica

Leica DVM5000 Guide de l'utilisateur

MshOt

MshOt MZ62 Manuel utilisateur

KERN Optics

KERN Optics OZR-5 Manuel utilisateur

VWR

VWR VisiScope 384 Series Manuel utilisateur

Nikon

Nikon ECLIPSE E200 POL Manuel utilisateur

Leica

Leica DI C800 Manuel

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manuel utilisateur

ThermoFisher Scientific

ThermoFisher Scientific Continuµm Manuel utilisateur

Olympus

Olympus SZ61 Manuel utilisateur