BasIP AA-07FB Manuel utilisateur

AA-07FB

entrance PANEL

quickstart guide

Full User Manual

wiki.bas-ip.com

123

456

7 8 9

*#T

1Backlight

Loudspeaker

AA-07FB SILVER multi apartment panel is an excellent solution for oﬃce

buildings, apartment complexes and cottage communities.

A distinctive feature of this panel is a color TFT screen with backlight,

as well as a high-resolution IP camera with wide viewing angles.

3Camera

44.3’’ Display

5Proximity sensors

Keypad

Reader

ENTRANCE PANEL MAIN SCREEN

main screen

On the main screen, you can ﬁnd information about:

• Data that must be entered to call the apartment (to call the required apartment, you need

to enter from 4 to 10 digits, depending on the current panel mode);

• The combination that must be entered to call the concierge (to call the concierge, you must

enter the combination 0000 # or press the concierge or info button in the upper right

corner of the keypad /);

• A button that opens the access code menu (to open the menu press #,

enter the access code, and press #to conﬁrm);

• A button to cancel an action or go back to previous the menu (press * to cancel);

Buttons that open the address book, which displays a list of contacts (sorted by name)•

for searching and calling an apartment if the exact logical address of the monitor is not known

(to open the address book, press the up / down arrows , and then press #to call).

By default, the address book is disabled, you can enable the option in the Apartments section

of the web interface.

Press «*» to exit the main screen or it

will be done automatically, after 30 sec

of inactivity.

The current statuses of the devices

connection to the network and SIP are

also displayed in the lower right corner.

You can change the text displayed on the main

screen in the Advanced tab of the web interface.

You can open basic settings from a panel or a web interface.

To enter the system settings, you must:

• Press the #button twice (the inscription Admin will appear on the screen).

Enter the admin password (the default password is 123456)•

Press #to conﬁrm. This will open the settings menu.•

Use the Up / Down arrows or the 2 / 8 buttons on your keypad to move between menus

and ﬁelds. To conﬁrm press the #button, and * if you need to go back.

ENTRANCE PANEL SETTINGS

HOW TO OPEN SETTINGS MENU?

Device Settings

In this menu, you can conﬁgure:

Panel operation mode•

• Wall mode is used when the panel is installed on the perimeter of the object.

If this variant is chosen, on the panel you must enter Building No., Unit No., Floor No., and Apartment No.

to call the necessary monitor.

Unit mode is required if the panel is installed near the unit entrance.•

When using this mode, it is enough to enter Floor No. and Apartment No. to call the necessary monitor.

• Device language (Russian, English, Ukrainian, Spanish, Polish, or Dutch)

• Panel logical address (Building No., Unit No., and Device No.)

For correct functioning, the panel and the monitor must have the same building and unit number

in apartment settings. Also for monitors, you must indicate corresponding information about the ﬂoor,

apartment, and device number.

If you have more than 1 entrance panel with the same logical address, you need to specify their

device numbers, starting from 1 for the main device, and from 2 to 9 for others.

• Admin password to enter device settings and web interface

Level of panel speaker volume•

Panel camera stream resolution (640х480 / 1280х720 / 1920x1080 (optional))•

Network settings

Here you can turn on/oﬀ DHCP connection and get network settings automatically

or enter it manually.

For correct panel work you must enter:

Panel IP address.•

By default, a device can have a static IP address 192.168.1.90 or 192.168.1.91

• Subnet mask

• The main gateway

• DNS server address

• Server is necessary if Link software is installed

Access settings

In this menu, you can set:

Lock open timeout is a period (1-300 sec) during which relay contacts will be closed•

or open (depending on the lock type), and a lock will stay open

Lock open delay is a period (1-300 sec) after which relay contacts will close or open after•

sending a signal to open a lock

Floor number (Elev Refer) where the panel is installed for further lift control module•

EVRC-IP use (optional).

Password (no more than 8 characters) is a general code entered on a panel keypad•

to open a lock. The default password is 0000.

Face settings

Enable / disable the feature•

Select similarity level (the lower the similarity level, the greater the error can be in scanning•

a face and granting access):

Low: the minimal similarity is necessary for access (changes in appearance (glasses, beard,•

presence of a hat) will not be taken into account)

Normal: some changes in appearance are taken into account, but not detailed•

(recommended for homes and oﬃces)

High: the maximum similarity is necessary for access (recommended for high-security•

places)

• Select the appropriate mode:

Software: the software recognition algorithm is used, and there is a possibility of giving•

access by photos

Anti-spooﬁng: more detailed software recognition algorithm is used to prevent access•

by photos

3D (is available for panels with a built-in 3D sensor): detailed face recognition using•

IR sensors and building a face heat map to prevent spooﬁng

• Turn on/oﬀ automatic face recognition when motion is detected.

When a person approaches a panel (at a distance up to 50 cm) motion sensor becomes

active, and a panel will exit standby mode and turn on the face recognition feature.

• Register new face to the panel memory

We recommend adding a face ID by uploading photos via the web interface, because faces added using

the method below will not be displayed in the web interface of the panel, so it will be impossible to link

it to a user.

How to add face ID via the graphical

interface:

In the Register column, press #•

and enter any number.

Press #again and stand in front•

of the camera for scanning.

• After a beep, the face will be added

to the panel memory.

• Delete all previously added faces

Misc settings

In this menu, you can:

Add a user access card to the panel memory•

You can add a card both in this menu and in the web interface (see the «Access management»

or «Identiﬁers» section).

To add a card via the panel interface:

Enter a random number in the RoomNum ﬁeld•

Bring the card to the reader area.•

You will hear a beep as conﬁrmation that the card is added. Also, its number will be shown in the Card ﬁeld.

The card number will be displayed in the Identiﬁers tab of the web interface, where you can add all•

the necessary information about the user and link the card to the corresponding apartment.

Reboot the panel.•

To do it, you must enter 1 and press #.

Reset panel settings to default settings.•

To do it, you must enter 1 and press #.

Panel reset will delete all cards.

About system

This menu displays

information about:

Framework versions (FW)•

Firmware versions (UI)•

Current IP address (IP)•

Current MAC address (MAC)•

SIP connection status (SIP)•

Autres manuels pour AA-07FB

Table des matières

Autres manuels basIP Système d'interphone

basIP

basIP BA-12BD Manuel utilisateur

basIP

basIP AA-07B Manuel utilisateur

basIP

basIP AV-08FB Manuel utilisateur

basIP

basIP AV-04SD Manuel utilisateur

basIP

basIP AV-01KD Manuel utilisateur

basIP

basIP BI-02FB Manuel utilisateur

basIP

basIP AV-07T Manuel utilisateur

basIP

basIP AK-10 Manuel utilisateur

basIP

basIP AT-10 Manuel utilisateur

basIP

basIP AZ-07L Manuel utilisateur

basIP

basIP AM-02 Manuel utilisateur

basIP

basIP SP-03 Manuel utilisateur

basIP

basIP AA-12FB Manuel utilisateur

basIP

basIP SP-03 Manuel utilisateur

basIP

basIP SP-03F Manuel utilisateur

basIP

basIP AA-07FBC Manuel utilisateur

basIP

basIP AA-12 Series Manuel utilisateur

basIP

basIP AA-07BD Manuel utilisateur

basIP

basIP AQ-07LL Manuel utilisateur

basIP

basIP AV-05FD Manuel utilisateur

basIP

basIP AT-10 Manuel utilisateur

basIP

basIP AV-01BD Manuel utilisateur

basIP

basIP AA-14FBS Manuel utilisateur

basIP

basIP AV-02FDR/E Manuel utilisateur

Manuels Système d'interphone populaires d'autres marques

Bticino

Bticino LINEA 3000 Manuel utilisateur

MSI

MSI MSI-140 Manuel utilisateur

golmar

golmar Stadio Plus Manuel utilisateur

CyberData

CyberData 011211 series Manuel

Vidos

Vidos duo M1021 Manuel utilisateur

Vimar

Vimar ELVOX 7539/E Manuel utilisateur

SSS Siedle

SSS Siedle BTSV 850-03 Manuel utilisateur

Dahua

Dahua VTO Series Manuel utilisateur

Elvox

Elvox 5651 Manuel utilisateur

Videx

Videx VIDEOKIT Series Manuel utilisateur

Rocom

Rocom Doortello Business FW T2.05W2.04 Manuel utilisateur

Viking

Viking E-35-EWP Manuel utilisateur

Safeguard Supply

Safeguard Supply LRA-EX1000 Manuel utilisateur

SSS Siedle

SSS Siedle BFCV 850 Series Manuel utilisateur

GRD

GRD MAX V2 Manuel utilisateur

Alecto

Alecto ADI-250 Manuel utilisateur

Aiphone

Aiphone IE-8MD Manuel utilisateur

Perel

Perel EDB4 Manuel utilisateur

basIP AA-07FB Manuel utilisateur

Manuels Système d'interphone populaires d'autres marques