BAFANG DP C171.UART Manuel utilisateur

DISPLAY MANUAL DP C171.UART

CONTENT

Content 1

Introduction 2

Appearances and dimensions 3

Speciﬁcations 4

Functional overview 5

Normal indication area 6

Button deﬁnition 7

Normal operation 7

Parameter setting 10

Error code deﬁnition 13

Bluetooth function 14

DP C171.UART

CONTENT

2DISPLAY MANUAL DP C171.UART

INTRODUCTION

•Name: Intelligent display HMI

•Model: DP C171.UART

•Scope: EN15194 electrical bicycle

•Appearance: the shell is made of PC; The

liquid crystal display is made of hardened

PMMA.

•Numbering on the back of HMI

Number on the middle of display back, num-

ber is divided into up row and down row (as

shown in the ﬁgure):

A. First line as below

DP C171.U 1.0

①DP C171.U : BAFANG Display model

② 1.0: Hardware version number

B. Second line as below

602F8Q7280001

① 602: Wire length and connector model

850 M5.2, keypad250

② F8: test device number

③ Q7280001:production date is

July 28th ,2016, serial number is 0001.

please refer to <Instrument labelling

rules> for other detailed description,

the document number is BF-TS-753-

C0-02II.

•Display HMI P type wire label number rule

Number on the middle of P type label, num-

ber is divided into up row and down row

and QR code is at right side (as shown in the

below ﬁgure).

The ﬁrst line:

DPC171F80201.1- Software version

The second line:

PD2526051205 - Parameter code

Content of QR code:

DPC171F80201.1

PD2526051205

DP C171.U 1.0

602F8Q7280001

DISPLAY MANUAL DP C171.UART

APPEARANCES AND DIMENSIONS

4DISPLAY MANUAL DP C171.UART

SPECIFICATIONS

•36V/43V/48V DC power supply

•Rated current is 10mA

•Maximum operating current is 30mA

•Power-off leakage current is less than 1uA

•Operating current supplied to controller is

50mA

•Operation temperature: -20℃~45℃

•Storage temperature: -30℃~70℃

•IP level: IP65

•Storage humidity: 30%-70%

DISPLAY MANUAL DP C171.UART

FUNCTIONAL OVERVIEW

•Use of a two-way serial communication

protocol, simple operation of the display via

the external 5-key keypad.

•Speed display: displaying the real-time speed

as SPEED, the maximum speed as MAXS and

the average speed as AVG.

•Km or mile: The user can choose between

km and mile.

•Intelligent battery level indication: With an

optimization algorithm, a stable display of

the battery level is ensured, and the problem

of ﬂuctuant battery level indication common

with other displays is avoided.

•Automatic light-sensitive lights: The head-

light, taillight and display backlight will be

automatically turned on/ off depending on

lighting conditions.

•5 levels off display backlighting: Different

levels, leave 1 is most dark, level 5 is highest

light.

•6-Level-Support: setting power Levels 0 to 5.

•Trip distance indication: The maximum

distance displayed is 99999. Single-trip

distances TRIP or the total distance TOTAL

can be displayed.

•Intelligent display: including motor output

power W for riding, Remaining miles TO GO,

consumption of energy (calories) C.

•Display of error messages

•Walk assistance

•Settings: Various parameters, e.g. mode,

wheel diameter, speed limit etc., can be set

on the computer via a communication cable.

See the setting.

•Maintenance warning (this function can be

deactivated): Maintenance warning informa-

tion is- dis played based on battery charge

cycles and riding distance. The display auto-

matically estimates the battery life and gives

warnings when the number of charge cycles

exceeds the set value. A warning will also be

displayed when the accumulated total riding

distance exceeds the set value.

•With Bluetooth module: Can connect to an

send message to phone, and phone can

display complete information of the entire

cycle.

FUNCTIONAL OVERVIEW

6DISPLAY MANUAL DP C171.UART

NORMAL INDICATION AREA

1Battery capacity indication

2Maintenace warning

3Main data indication

4Trip data

5Indication for history and battery data

6Push asisstance

7USB connection

8Headlight indication

9Malfunction warning

10 Error warning

11 Selection of speed unit

12 History of riding speed

13 Remaining range

14 Unit indication

15 Level indication

•Battery capacity indication: 10-segment

battery indication; the voltage that each seg-

ment represents can be customized.

•Maintenance warning: When there is a need

for maintenance the symbol will be

displayed (riding distance or the number of

battery charge cycles exceed the set value,

function can be deactivated).

•Main data indication: indicate the real-time

speed and error code

•Trip data: the single-trip distance TRIP, the

total distance TOTAL.

•Indication for history and battery data:

indicate the history of riding and battery

real-time data

•Push asisstance: Push and walk assistance

at 6km/h

•USB connection: connect to USB charging

port

•Headlight indication: only shows when

headlight or backlight are on.

•Malfunction warning: When a fault is de-

tected the symbol will be displayed.

•Error warning

•Selection of speed unit: display of the speed,

km/h or mph.

•Level indication: The chosen level 1–5 will

be displayed; if there is no numeric display,

it means that there is no assistance (by the

motor). If the rider is walking and pushing

the e-bike, will be displayed.

•History of riding speed: average speed (AVG

km/h), maximum speed (MAXS km/h).

•Remaining range:remaining distance TO GO.

•Distance indication: display of the distance

depending on the setting.

DISPLAY MANUAL DP C171.UART

BUTTON DEFINITION

NORMAL OPERATION

•ON/OFF Switch

Turn on the device, press and hold for

2s to power on the display. Press and hold

again for 2s to power off the display, If

the bike is not used, after 5 minutes (time

can be set) the display will be automatically

turned off.

•Assist Mode Selection

In the manual gearshift mode, press the

or choose the desired level of support by

the motor. The lowest level is Level 1, the

highest Level 5. When the display is on, the

default mode is Level 1. When there is no

numeric mode display, there is no power

assistance.

(power assistance lever selection interface as

below ﬁgure)

BUTTON DEFINITION

Headlight button

Switch button

Mode button

Up button

Down button

8DISPLAY MANUAL DP C171.UART

•Switch between Distance Mode and

Speed Mode

Brieﬂy press to switch between distance

and speed. Single-trip distance (TRIP km)

→Total distance (TOTAL km) →Maximum

speed (MAXS km/h) →Average riding speed

(AVG km/h) → Remaining distance(TO GO) →

Real-time output power (W) →Energy con-

sumption (C) →Heartbeat (H) are displayed

in successive order.(Switch mode interface

as below)

•Headlight/ Display Backlight Switch

Press for 2 seconds. The backlight of

the display as well as the headlight and tail-

light will be turned on. Press again for

2 seconds to power off the display backlight

/ headlight / taillight. There are 5 levels of

backlight brightness that can be selected by

the user. (If the display is turned on in a dark

environment, the display backlight / head-

light / taillight will be turned on automati-

cally. If the display backlight / headlight / tail-

light are turned off manually, they also need

to be turned on manually afterwards)

•Walk Assistance

Press for 2 seconds. The e-bike enters

the walk assistance mode, and the symbol

WALK is displayed. Once the key is

released, the e-bike will exit the walk as-

sistance mode.

DISPLAY MANUAL DP C171.UART

NORMAL OPERATION

•Battery Status Indication

When the battery status is normal, a certain number of the battery LCD segments as well as the bor-

der light up according to the actual quantity of charge. If all of the 10 segments will black out with

the border blinking, the battery needs to be charged immediately.

•Battery status indication

Number of

Segments

Charge in

Percentage

Number of

Segments

Charge in

Percentage

Number of

Segments

Charge in

Percentage

10 ≥90% 6 50%≤C<60% 2 15%≤C<25%

9 80%≤C<90% 5 45%≤C<50% 1 5%≤C<15%

8 70%≤C<80% 4 35%≤C<45% Border

blinking C<5%

7 60%≤C<70% 3 25%≤C<35%

•When display turns off, connect the USB

cable to the port of the display and then dis-

play turn on and begin charge. If display is

being on, only connect the USB cable to the

port to the display and display begin charge.

Maximum charge voltage is 5V, maximum

charge current is 500mA

10 DISPLAY MANUAL DP C171.UART

PARAMETER SETTING

•Items to be Set

1〉Data reset

2〉Km/mile

3〉Light sensitivity

4〉Display backlight brightness

5〉Automatic off time

6〉Maintenance warning settings

7〉Check wheel diameter

8〉Speed Limit Setting

9〉Speed model

10 〉Battery infromation10 error code

•Setting Preparation

1) When the display is active, press

twice (interval < 0.3 seconds). The system

will enter the MENU parameter setting

state, in which the display parameters can

be set. Press twice again (interval < 0.3

seconds) to return to the main menu.

2) If no operation is performed for 10 sec-

onds, the display will return to the normal

riding display.

3) In the parameter setting state, when the

parameter you want to set begins to ﬂash,

press / to adjust the parameter value.

Brieﬂy press to switch between the pa-

rameters to be set. Press twice (interval

< 0.3 seconds) to exit the submenu.

•Data reset

Press twice (interval < 0.3 seconds) –

the display enters the MENU state. In the

speed ﬁeld tC is displayed. If you press ,

a "y" is also displayed. Now all temporary

data, e.g. maximum speed (MAXS), average

speed (AVG) and single trip distance (TRIP)

can be cleared. Brieﬂy press (< 0.3 sec-

onds) to enter the km/mile setting interface.

If the user does not reset the data, the single

trip distance and the accumulated total rid-

ing time will be automatically cleared when

the accumulated total riding time exceeds

99 hours and 59 minutes.

* The data will not be cleared when the

display’s light-sensing function is set to 0 or

when it is switched off!

•Km/mile

When the speed ﬁeld displays S7, press

/ to switch between km/h and mph, or

to set km or mile. After this setting, brieﬂy

press (< 0.3 seconds) to enter the

setting interface of light sensitivity. Default

display is km.

•Light Sensitivity

When the speed ﬁeld displays bL0, press

/ to choose a ﬁgure between 0 and 5.

The higher the chosen ﬁgure, the higher the

light sensitivity.

Autres manuels pour DP C171.UART

Table des matières

Autres manuels BAFANG Accessoires pour vélos

BAFANG

BAFANG UB40 Manuel utilisateur

BAFANG

BAFANG DP E161.CAN Manuel utilisateur

BAFANG

BAFANG DP C231.CAN Manuel utilisateur

BAFANG

BAFANG CR A101.C 1.0 Manuel utilisateur

BAFANG

BAFANG DP C10.UART Manuel utilisateur

BAFANG

BAFANG MM G31.250 Manuel utilisateur

BAFANG

BAFANG DP C230.CAN Manuel utilisateur

BAFANG

BAFANG DP C230.CAN Manuel utilisateur

BAFANG

BAFANG DP C01.RS 232.7 Manuel utilisateur

BAFANG

BAFANG DP E170.CAN Manuel utilisateur

BAFANG

BAFANG DP C10.UART Manuel utilisateur

BAFANG

BAFANG M625 Manuel utilisateur

BAFANG

BAFANG DP C18.UART Manuel utilisateur

BAFANG

BAFANG DP E170.CAN Manuel utilisateur

BAFANG

BAFANG C961 Manuel utilisateur

BAFANG

BAFANG BT C01.340.UART Guide de référence

BAFANG

BAFANG MM G333.250.C Manuel utilisateur

BAFANG

BAFANG H610 Manuel utilisateur

BAFANG

BAFANG DPC-10 Biktrix Manuel utilisateur

BAFANG

BAFANG DP C171.UART Manuel utilisateur

BAFANG

BAFANG H600 Manuel utilisateur

BAFANG

BAFANG DP C240.CAN Manuel utilisateur

BAFANG

BAFANG H500F Manuel utilisateur

BAFANG

BAFANG DP E171.CAN Manuel utilisateur

Manuels Accessoires pour vélos populaires d'autres marques

Sigma

Sigma BC 16.16 Manuel utilisateur

Playcore

Playcore Dero Setbacks Manuel utilisateur

VDO Cyclecomputing

VDO Cyclecomputing x3dw Manuel utilisateur

Cateye

Cateye RAPID X2 Manuel utilisateur

buratti meccanica

buratti meccanica Clorofilla Trail Manuel utilisateur

Shimano

Shimano SG-8R20 Mode d'emploi

BOB

BOB YAK Manuel utilisateur

APLIC

APLIC 303303/20190717TW012 Manuel utilisateur

SRAM

SRAM AXS BlipBox Manuel utilisateur

Garmin

Garmin EDGE 500 Manuel utilisateur

Shimano

Shimano FD-RX810 Manuel utilisateur

Cateye

Cateye V2C - Manuel d'instructions

KMART

KMART 43115907 Manuel utilisateur

SIGMA SPORT

SIGMA SPORT Buster 2000 Manuel utilisateur

NVO Components

NVO Components STEM Manuel utilisateur

DAXYS

DAXYS BP188 Manuel utilisateur

XLC

XLC BV-W17 Manuel utilisateur

Deda Elementi

Deda Elementi SUPERBOX Manuel utilisateur