BAFANG DP C18.UART Manuel utilisateur
1
DISPLAY MANUAL DP C18.UART
CONTENT
Content 1
Introduction 2
Overview drawing 3
Specifications 4
Functional overview 5
Normal indication area 6
Button definition 7
Normal operation 7
User setting 10
Error code definition 17
DP C18.UART
CONTENT
2DISPLAY MANUAL DP C18.UART
INTRODUCTION
• Name: Intelligent display
• Model: DP C18.UART
• Scope: electrically power assistance cycle
• Appearance: the shell is made of PC; The
liquid crystal display is made of hardened
PMMA
• Numbering on the back of the display
Number on the middle of display back, num-
ber is divided into up row and down row:
A. Up row number (as below)
DP C18.U 1.0
①DP C18.U: BAFANG display model
②1.0: hardware version number
B. Down row number (as below)
605P1QB220003
① 605: Wire length and connector model
is 230mm M5.2
② P1: design number
③ QB220003: Production date is
21st Nov. 2016; SN is 0003
• Display P type wire label number rule
Number on the middle of P type label, num-
ber is divided into up row and down row
and QR code is at right side (as shown in the
below figure)
Content of QR code:
DPC18P10101.0
PD2528051505
DP C18.U 1.0
605P1QB220003
The first line:
DPC18P10101.0 - Software version
The second line:
PD2528051505 - Parameter code
The last two lines:
DP C18.U 1.0 / 605P1QB220003 - SN
3
DISPLAY MANUAL DP C18.UART
OVERVIEW DRAWING
OVERVIEW DRAWING
4DISPLAY MANUAL DP C18.UART
SPECIFICATIONS
• Rated voltage: 36V/43V/48V DC
• Rated current: 10mA lines(as shown in the
figure)
• Maximum operating current: 30mA
• When power off, leak current is less than:
1uA
• Operating current supplied to controller:
50mA
• Operation temperature: -20℃~45℃
• Storage temperature: -30℃~70℃
• IP level: IP65
• Storage humidity: 30%-70%
5
DISPLAY MANUAL DP C18.UART
FUNCTIONAL OVERVIEW
• Use of a two-way serial communication
protocol, simple operation of the display via
the external 5-key keypad.
• Speed display: displaying the real-time speed
as SPEED, the maximum speed as MAXS and
the average speed as AVG.
• Km or mile: The user can choose between
km and mile.
• Intelligent battery level indication: With an
optimization algorithm, a stable display of
the battery level is ensured, and the problem
of fluctuant battery level indication common
with other displays is avoided. The user can
define display mode of battery level as volt-
age or percentage.
• Automatic light-sensitive lights: The head-
light, taillight and display backlight will be
automatically turned on/ off depending on
lighting conditions.
• 5 levels off display backlighting: 10% is most
dark, 100% is highest light.
• 6-Level-Support: setting power Levels 0 to 5.
• Trip distance indication: The maximum
distance displayed is 99999. Single-trip
distances TRIP or the total distance TOTAL
can be displayed.
• Display of error messages
• Walk assistance
• Two kind of riding mode: “ECO”/“SPORT”
• Intelligent display: including motor’s output
power W for riding, output current A,
Remaining miles RANGE, consumption of
energy CALORIES.
• Set boot password: user can set boot pass-
word by himself.
• Set parameters: Various parameters, e.g.
power assistance level, wheel diameter,
speed limit etc., can be set on the computer
via a communication cable. Please see the
detailed in the description of the computer
parameter configuration.
• Through the display, it can switch wheel
diameter and speed limit.
FUNCTIONAL OVERVIEW
6DISPLAY MANUAL DP C18.UART
NORMAL INDICATION AREA
1Time display:
The time is represented in the 24-hour system
and show the current time, time can be set in
the“Set clock”.
2USB charge display:
When external connect into the display, it
display the symbol.
3Headlight indication:
Only shows when headlight is on.
4Speed scale display:
the scale value is in accordance with the
digital value.
5Mode select:
single-trip distance (TRIP) →total distance
ODO →maximum speed (MAX) →average
speed (AVG) →remaining distance (RANGE)
→energy consumption (CALORIES) →time
(TIME).
6Battery level display:
Display current battery level value.
7Voltage display/percentage display:
Display actual battery level value, display
mode can be set in the “Soc View”.
8Speed digital display:
Display current speed value, speed unit can
be set in“Unit”.
9Power scale display/current scale display:
Display current output value, output unit can
be set in“Power View”.
10 Power assistant level display/walk assistance:
Display the seven levels as“0”/“1”/“2”/“3”/
“4”/ “5”/“ ”, briefly press (0.5S) or
to switch the level. Touch and hold (2S) to
start the mode “ walke assistance”, display
symbol.
11 Mode data display:
Display current data corresponding to the
mode.
12 Riding mode display:
Display current riding mode, “SPORT” or
“ECO”, can touch and hold (2S) to switch
the mode.
1
2
3
4
5
5
6
7
8
9
10
11
12
7
DISPLAY MANUAL DP C18.UART
BUTTON DEFINITION
ON/OFF
Level "+"
Level "-"
Mode
Headlight
NORMAL OPERATION
• On/off switch
Turn on the power, press and hold (>2S)
to power on the display, the display begin
to operate. Press and hold (>2S) again
to power off the display. If the bike is not
used, after 5 minutes (time can be set in
“Auto Off”) the display will be automatically
turned off. If the password function of the
display is activated, need to input the correct
password to enter into the normal display
interface.
• Power assistance level select
In the manual gearshift mode, briefly press
(<0.5S) or to switch the level to
change the assistance power, The lowest
level is Level 0, the highest Level 5. When
the display is on, the default mode is Level
1,“0”means no power assistance.
BUTTON DEFINITION
8DISPLAY MANUAL DP C18.UART
• Switch between Distance Mode and Speed Mode
Briefly press (0.5s) to switch the display between the distance and speed, cycle show signal-trip
distance (TRIP) →total distance (ODO) →maximum speed (MAX) →average speed (AVG) →remaining
distance (RANGE) →energy consumption (CALORIES) →time (TIME).Energy consumption unit CALO-
RIES means kCal.
9
DISPLAY MANUAL DP C18.UART
NORMAL OPERATION
• Headlight / Display Backlight Switch
Press and hold (>2S) to turn on the
display backlight as well as headlight. Press
and hold (>2S) again to turn off the
display backlight and the headlight. There
are 5 levels of backlight brightness that
can be selected by the user (can be set in
the“Brightness”). (If the display is turned on
in a dark environment, the display backlight/
headlight will be turned on automatically. If
the display backlight/headlight are turned
off manually, they also need to be turned on
manually afterwards)
• Walk assistance mode
Press and hold (>2S) to enter into walk
assistance mode, the symbol is displayed,
when release key , will exit the walk as-
sistance the mode.
• Switch mode between ECO and SPORT
Press and hold (>2S) to switch riding
mode into “ECO”or “SPORT”.
10 DISPLAY MANUAL DP C18.UART
USER SET
• Operating process in the set interface
AL Sensitivity
Default Mode
Unit
Brightness
Auto Off
Power View
SOC View
TRIP Reset
Factory Setting
Password
Set clock
BACK
Default Mode
Wheel
Speed Limit
BACK
Battery info.
Error Code
EXIT
SETTING
Display Setting
Information
Autres manuels pour DP C18.UART
2
Table des matières
Autres manuels BAFANG Accessoires pour vélos
BAFANG
BAFANG MM G31.250 Manuel utilisateur
BAFANG
BAFANG H310 Manuel utilisateur
BAFANG
BAFANG C961 Manuel utilisateur
BAFANG
BAFANG DP E170.CAN Manuel utilisateur
BAFANG
BAFANG DP E161.CAN Manuel utilisateur
BAFANG
BAFANG M510 Manuel utilisateur
BAFANG
BAFANG MM G333.250.C Manuel utilisateur
BAFANG
BAFANG C966 Instructions de fonctionnement
BAFANG
BAFANG H600 Manuel utilisateur
BAFANG
BAFANG DP C230.CAN Manuel utilisateur
BAFANG
BAFANG DP C10.CAN Manuel utilisateur
BAFANG
BAFANG DP C171.UART Manuel utilisateur
BAFANG
BAFANG DP C01.CAN BUS Manuel utilisateur
BAFANG
BAFANG E-SYSTEM Manuel utilisateur
BAFANG
BAFANG DP E08.CAN Manuel utilisateur
BAFANG
BAFANG C961 Manuel utilisateur
BAFANG
BAFANG DPC-10 Biktrix Manuel utilisateur
BAFANG
BAFANG C965 Manuel utilisateur
BAFANG
BAFANG DP C18.UART Manuel utilisateur
BAFANG
BAFANG UB600 Manuel utilisateur
