Avenview HDM-SHAREPRO-IP Manuel utilisateur
VIDEO WALLS VIDEO PROCESSORS
VIDEO MATRIX SWITCHES
EXTENDERS SPLITTERS WIRELESS
CABLES & ACCESSORIES
AV Connectivity, Distribution And Beyond...
Remote Screen/Print Sharing Extender over
WIFI / LAN with KVM
© 2013 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or
warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted
by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims
any express or implied warranty, relating to its products of Avenview Inc. is strictly prohibited.
Model #: HDM-SHAREPRO-IP
Military Residential
Medical Aviation
Education Industrial
Corporate House Of Worship
www.avenview.com
Product Application & Market Sectors
www.avenview.com Page 3
TABLE OF CONTENTS
1. GETTING STARTED ..........................................................................................................................1
1.1 IMPORTANT SAFEGUARDS..............................................................................................................1
1.2 SAFETY INSTRUCTIONS ..................................................................................................................1
1.3 REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISSION (FCC) ........................... 2
1.4 INTRODUCTION ..............................................................................................................................3
1.5 PACKAGE CONTENTS .....................................................................................................................4
1.6 BEFORE INSTALLATION...................................................................................................................4
1.7 DEVICE DESCRIPTION & LAYOUT..................................................................................................5
FRONT PANEL & REAR PANEL (Transmitter, HDM-C6IP-S)............................................................5
1.8 INSTALLATION A ..............................................................................................................................6
1.9 INSTALLATION B...............................................................................................................................7
1.10 INSTALLATION OF DRIVER AND CONTROL SOFTWARE ...........................................................8
1.11 CONTROL SOFTWARE ....................................................................................................................9
1.12 DISCONNECT SOFTWARE ............................................................................................................11
2. GENERAL TROUBLESHOOTING...................................................................................................12
2. SPECIFICATIONS .............................................................................................................................13
3. SPECIFICATIONS.............................................................................................................................13
3. PIN & WIRING STANDARD DEFINITION......................................................................................14
www.avenview.com Page 1
SECTION 1: GETTING STARTED
1.1 IMPORTANT SAFEGUARDS
Please read all of these instructions carefully before you use the device. Save this manual for future reference.
What the warranty does not cover
•Any product, on which the serial number has been defaced, modified or removed.
•Damage, deterioration or malfunction resulting from:
•Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to
follow instructions supplied with the product.
•Repair or attempted repair by anyone not authorized by us.
•Any damage of the product due to shipment.
•Removal or installation of the product.
•Causes external to the product, such as electric power fluctuation or failure.
•Use of supplies or parts not meeting our specifications.
•Normal wear and tear.
•Any other causes which does not relate to a product defect.
•Removal, installation, and set-up service charges.
1.2 SAFETY INSTRUCTIONS
The Avenview HDM-SHAREPRO-IP, RJ45 to HDMI Converter has been tested for conformity to safety regulations and
requirements, and has been certified for international use. However, like all electronic equipment’s, the HDM-SHAREPRO-IP
should be used with care. Read the following safety instructions to protect yourself from possible injury and to minimize the risk
of damage to the unit.
!Do not dismantle the housing or modify the module.
!Dismantling the housing or modifying the module may result in electrical shock or burn.
!Refer all servicing to qualified service personnel.
!Do not attempt to service this product yourself as opening or removing housing may expose you to dangerous voltage
or other hazards
!Keep the module away from liquids.
!Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on
to the housing, unplug the module immediately.
!Have the module checked by a qualified service engineer before using it again.
!Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
1. GETTING STARTED
www.avenview.com Page 2
1.3 REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISSION (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.
Warning symbols Description
ONLY USE THE PROVIDED POWER CABLE OR POWER
ADAPTER SUPPLIED. DO NOT TAMPER WITH THE
ELECTRICAL PARTS. THIS MAY RESULT IN ELECTRICAL
SHOCK OR BURN.
DO NOT TAMPER WITH THE UNIT. DOING SO WILL
VOID THE WARRANTY AND CONTINUED USE OF THE
PRODUCT.
THE VIDEO BOARDS ARE VERY SENSITIVE TO STATIC.
PLEASE ENSURE IF RACK MOUNTED OR INSTALLED ON A
SURFACE, IT SHOULD BE IN A GROUNDED ENVIROMENT.
www.avenview.com Page 3
2. INTRODUCTION
HDM-SHAREPRO-IP is an ideal networking display solution; it allows multiple users on the same Ethernet network to access
the display without physically connect their computer directly to the display! The product supports ONLY ONE connection at a
time. Users can now enjoy their favorite multimedia content stored on their computer from anywhere in their home or office.
HDM-SHAREPRO-IP also act as a display extender that supports up to 1920*1080 resolutions with primary display, mirror
desktop and extended desktop video modes!
- Support 1080p Video over TCP/IP,LPR,DHCP,UPnP
- Support USB Keyboard and Mouse Wired/Wireless
- Supports 500mA electric current for every USB port;
- Digital Video HDMI with Audio
- Analog Video with VGA and Audio connection
- Analog 3.5mm Audio out connection
- Converts RJ45 to HDMI
- Ethernet IEEE 802 3 10Base IEEE
- Standards:802.3 10Base-T;802.3U 100Base-T
- Network Interface:10/100/1000Mbps RJ45
- Supports the resolution up to 1080p
- Allows multiple users to share a Multi-Function Print (MFP) over a network to print, scan, and fax from any networked
computer;
- Supports Windows 7,Vista and XP
www.avenview.com Page 4
2.1 PACKAGE CONTENTS
Before you start the installation of HDM-SHAREPRO-IP, please check the STANDARD package contents.
1HDM-SHAREPRO-IP X 1
2POWER ADAPTER (5VDC) X1
3USER’S MANUAL X 1
4INSTALLATION DISC X 1
2.2 BEFORE INSTALLATION
•Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction.
•Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity.
•Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire.
www.avenview.com Page 5
2.3 DEVICE DESCRIPTION & LAYOUT
This product is composed of a Converter RJ45 to HDMI
2.3.1 Front Panel (Transmitter, HDM-C6IP-S)
1. Power ON/OFF Switch 2. USB Port
2.3.2 Rear Panel (Transmitter, HDM-C6IP-S)
1. +5V DC: Connect to 5V DC power supply 2. CAT/6: Plug in a CAT6 cable that is connected to
your router on the same IP Network
3. USB INPUT: Connect ANY mouse/keyboard wired/
wireless adapter.
4. 3.5mm Jack: Stereo audio INPUT connection for
VGA connection.
5. 3.5mm Jack: Stereo audio OUTPUT connection for
VGA connection.
6. VGA: Connects to VGA Monitor with a male-male
cable.
7. Device ID: To identify multiple units in cascademode
Note:
Preferred CAT6 and Gigabit 10/1000 Router to ensure HD1080p resolution without delay in transmission
Important
Before starting the insulation please ensure that all devices are powered OFF
1 2
1 2 3 4 5 6 7
www.avenview.com Page 6
3. INSTALLATION A
Please ensure all the package contents are all received.
To setup Avenview HDM-SHAREPRO-IP follow these steps for connecting directly to a Monitor as a CONVERTER:
1. Connect Converter to CPU with RJ45 cable; follow the standards of TIA-568BLAN
2. Connect your HDMI OR VGA display (such as a LCD TV/PLASMA) to the HDMI OR VGA Port on the HDM-SHAREPRO-IP.
3. Make sure CAT-5E/6 LAN cable is tightly connected and not loose.
4. Plug in 5V DC power cord to the power jack of the transmitting unit HDM-SHAREPRO-IP.
www.avenview.com Page 7
3.1 INSTALLATION B
Please ensure all the package contents are all received.
To setup Avenview HDM-SHAREPRO-IP follow these steps for connecting to a Remote Monitor.
1. Connect HDM-SHAREPRO-IP to Wireless or Wired Router with RJ45 cable at the desired Monitor; follow the standards
of TIA-568BLAN
2. Connect your HDMI OR VGA display (such as a LCD TV/PLASMA) to the HDMI OR VGA Port on the HDM-SHAREPRO-IP.
3. Make sure CAT-5E/6 LAN cable is tightly connected and not loose.
4. Plug in 5V DC power cord to the power jack of the transmitting unit HDM-SHAREPRO-IP.
BOTH OFFICES CAN USE THIS PRODUCT ONCE THE SOFTWAR IS INSTALLED (NB: One at a Time)
Autres manuels pour HDM-SHAREPRO-IP
1
Table des matières
Autres manuels Avenview Extenseur
Avenview
Avenview WL-VGA-EXT Manuel utilisateur
Avenview
Avenview FO-HDM2-T4K-SET Manuel utilisateur
Avenview
Avenview HDSD FO-HDSDI-L-SET Manuel utilisateur
Avenview
Avenview FO-DVI-1080LC-Set Manuel utilisateur
Avenview
Avenview HBT-C6POE-R Manuel utilisateur
Avenview
Avenview FO-DVI-1080LC-Set Manuel utilisateur
Avenview
Avenview FO-DVI-XX-MM Manuel utilisateur
Avenview
Avenview HBT-C6IR-SET Manuel utilisateur
Avenview
Avenview FO-HDMI-1000M-EMI Manuel utilisateur
Avenview
Avenview FO-HDMI-SET Manuel utilisateur
Avenview
Avenview HDMI-C5-3-SET Manuel utilisateur
Avenview
Avenview DVI-C5-LC-R Manuel utilisateur
Avenview
Avenview HBT-C6POE-SET Manuel utilisateur
Avenview
Avenview VGA-C5RS-SET Manuel utilisateur
Avenview
Avenview HDM-C5XD-S Manuel utilisateur
Avenview
Avenview HDMI-C5SP-8SRSR Manuel utilisateur
Avenview
Avenview WL-VGA-EXT Manuel utilisateur
Avenview
Avenview HDMI-C5-S Manuel utilisateur
Avenview
Avenview VGA-C5-SP-4 Manuel utilisateur
Avenview
Avenview HDM3D-C5SP-8 Manuel utilisateur
