Avenview HDM-C5SP-8 Manuel utilisateur

www.avenview.com

2X8 HDMI 1.3 Extender / Splitter over

Single CAT5

Model #: HDM-C5SP-8

The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or warranties with

respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any

time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in

Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products

including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.

Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly prohibited.

www.avenview.com

Table of Contents

Section 1: Getting Started ...................................................................................................................... 3

1.1 Important Safeguards ............................................................................................................ 3

1.2 Safety Instructions ................................................................................................................. 3

1.3 Regulatory Notices Federal Communications Commission (FCC) ......................................... 4

1.4 Introduction ........................................................................................................................... 4

1.5 Package Contents................................................................................................................... 6

1.6 Before Installation.................................................................................................................. 6

1.7 Panel Description................................................................................................................... 7

1.7.1 Rear Panel ............................................................................................................................. 7

1.8 IR Control ............................................................................................................................... 7

1.7.3 Dip Switch for EDID & Audio Settings ................................................................................... 8

1.9 Installation ............................................................................................................................. 9

Section 2: Specifications....................................................................................................................... 10

www.avenview.com

Section 1: Getting Started

1.1 Important Safeguards

Please read all of these instructions carefully before you use the device. Save this manual for future

reference.

What the warranty does not cover

Any product, on which the serial number has been defaced, modified or removed.

Damage, deterioration or malfunction resulting from:

Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized

product modification, or failure to follow instructions supplied with the product.

Repair or attempted repair by anyone not authorized by us.

Any damage of the product due to shipment.

Removal or installation of the product.

Causes external to the product, such as electric power fluctuation or failure.

Use of supplies or parts not meeting our specifications.

Normal wear and tear.

Any other causes which does not relate to a product defect.

Removal, installation, and set-up service charges.

1.2 Safety Instructions

The Avenview HDM-C5SP-8 HDMI 1.3 Extender / Splitter over CAT5 has been tested for conformance to safety

regulations and requirements, and has been certified for international use. However, like all electronic

equipment’s, the HDM-C5SP-8 should be used with care. Read the following safety instructions to protect

yourself from possible injury and to minimize the risk of damage to the unit.

Do not dismantle the housing or modify the module.

Dismantling the housing or modifying the module may result in electrical shock or burn.

Refer all servicing to qualified service personnel.

Do not attempt to service this product yourself as opening or removing housing may expose you to

dangerous voltage or other hazards

Keep the module away from liquids.

Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid

falls or spills on to the housing, unplug the module immediately.

Have the module checked by a qualified service engineer before using it again.

Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before

cleaning.

www.avenview.com

1.3 Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed

to provide reasonable protection against harmful interference in a residential installation.

Any changes or modifications made to this equipment may void the user’s authority to operate this

equipment.

1.4 Introduction

The Avenview HDM-C5SP-8 HDMI 1.3 over Single CAT5 Distribution Amplifier provides the most flexible

solution by which the high definition video and high quality audio can be transmitted to different locations

over a long distance. The devices are cascadable, allowing you to extend HDMI compliant displays almost

anywhere. The 2 input HDMI source (only 1 input can be used at a time) can be duplicated and distributed to

up to 8 HDMI enable displays through cost effective Cat-5/5e cables and RJ-45 to HDMI mini-extenders

HDM-C5-R-M. With the built in equalization, the input HDMI cable can be extended up to 20 meters (66 feet)

long under Full HD, and make the overall transmission distance superior than regular HDMI splitters or matrix

switches in the market.

-Silicon Image chipset embedded for best quality, compatibility and reliability

-HDMI 1.3c compliant

-HDCP compliant

-Regenerates the HDMI signal

-Acts as 2X1 HDMI Switch and 1X8 HDMI over CAT5 Splitter

-Supports default HDMI EDID and has the ability to learn the EDID of the displays

-Supports default HDMI EDID and has the ability to learn the EDID of displays

-Extends up to 20m (66ft) of input HDMI cable

-Extends up to 60m (200ft) (720p / 1080i) of output CAT5/6 cable

-Extends up to 40m (130ft) (1080p) of output CAT5/6 cable

-Pure unaltered uncompressed 7.1ch digital HDMI over LAN cable transmission

-Allows cascading

-1U rack mountable with interlocking power adapter for fixedness

-Perfectly integrated with other HDM-C5XD Series products

www.avenview.com

1.5 Package Contents

Before you start the installation of the converter, please check the package contents.

-HDM-C5SP-8 x 1

-Rack-mounting ears x 2

-Power Adapter x 1

-User’s Manual x 1

1.6 Before Installation

Put the product in an even and stable location. If the product falls down or drops, it may cause an

injury or malfunction.

Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high

humidity.

Use the DC power adapter with correct specifications. If inappropriate power supply is used then it

may cause a fire.

Do not twist or pull by force ends of the optical cable. It can cause malfunction.

www.avenview.com

1.7 Panel Description

1.7.1 Rear Panel

1 2 3 4 5 6

1. Power Jack

2. HDMI Input 1

3. HDMI Input 2

4. DIP Switches (details below)

5. HDMI Input Source Selection (1 & 2)

6. HDMI Output over RJ45 (1 –8)

1.8 IR Control

Function Key

Function Description

Power

Turn On/Off HDMI transmission on all 8

Output Ports

Switch to the other channel from either

HDMI INPUT 1 or HDMI INPUT 2 that is in

play

Switch to the other channel from either

HDMI INPUT 1 or HDMI INPUT 2 that is in

play

SOURCE SELECT 1

Select HDMI INPUT 1 to be the input

source

SOURCE SELECT 2

Select HDMI INPUT 2 to be the input

source

Mute on/off (audio off, video on) on all

eight output ports

www.avenview.com

1.7.3 Dip Switch for EDID & Audio Settings

DIP Switch Position

Video

Audio

Description

PIN # 1

PIN # 2

OFF 

1080p

Stereo1

Default Mode2:Up to 1080p & Stereo output.

OFF 

ON 

720p/1080i

Stereo

Safe Mode3:Forces system to output at 720p/1080i

with Stereo Audio.

ON 

OFF 

Bypass4

Bypass

EDID Learning Mode5:for learning EDID from the

display while playing any received HDMI Audio format.

ON 

Bypass

Stereo

EDID Learning & Stereo Mode: For learning EDID from

the display while enforcing stereo output.

1 Pin-1 and pin-2 are for HDMI INPUT 1; while pin-3 and pin-4 are for HDMI INPUT 2

2 If the HDTV shows video but without audio, please set audio mode to stereo.

3 Factory default setting is pin-1 at OFF[



], pin-2 at OFF[



], pin-3 at OFF[



] & pin-4 at OFF[



]for 1080p

with stereo.

4 If you encounter any unsolved audio/video output problem during system installation, please dial the DIP

switch to pin-1 at OFF[



], pin-2 at ON[



], pin-3 at OFF[



], & pin-4 at ON[



] for safe mode to enforce the

most compatible 720p stereo output for system check. However, the safe mode cannot be initiated if your

HDMI sources are set to enforce 1080p output. In this case, please reconfigure your HDMI source to all

resolution output for troubleshooting.

5 Bypass means this device will maintain playing the original format of HDMI signals in video and perhaps

audio. By setting at this mode, the users may encounter compatibility issue among different kinds of HDMI

sources and displays. If you cannot get the audio and/or video output normally at the system installation,

please change the DIP switch setting to default mode or even safe mode to verify the functionality of the

device.

6 To learn the EDID of HDMI display for respective HDMI source devices, set (pin-1 and/or pin-3)at ON[



]

first then connect the HDTV sets to respective HDMI inputs via HDMI cables. Then please wait for 20

seconds for completing the EDID learning procedure. If you want to learn the EDID from another HDTV, you

must set pin-1 and/or pin-3) at OFF[



] first and repeat this procedure all over again.

www.avenview.com

1.9 Installation

To setup Avenview HDM-C5SP-8 follow these steps for connecting to a device:

1. Turn off all devices including monitors / TV

2. Connect to a HDMI source (such as a Blu-Ray Disc player) to HDMI Input of HDM-C5SP-8

3. Connect the receiver HDM-C5-3-R or HDM-C5-R-M to HDM-C5SP-8 from RJ45 Out with CAT5 / CAT6

cable

4. Plug in 5V 4A DC Power (supplied).

5. Power on the HDMI display

6. Power on HDMI Sources.

www.avenview.com

Section 2: Specifications

Item

Description

Units

HDM-C5SP-8

Unit Description

2x8 HDMI 1.3 Transmitter / Splitter over CAT5 / CAT6

HDMI Compliance

HDMI 1.3c

HDCP Compliance

Yes

Video Bandwidth

Single Link 225 MHz (6.75Gbps)

Supported Resolutions

480i / 480p / 720p / 1080i / 1080p60

Resolution and Distance

Full HD: (1080p) ~ 40meter (130feet) (CAT5e) / 50meter (165feet) (CAT6)

HD: (720p/1080i) ~ 50meter (165feet) (CAT5e) / 60meter (200feet) (CAT6)

Audio Support

Surround Sound (up to 7.1 Ch) or Stereo Digital Audio

Equalization

Input TMDS Signal

1.2 Volts (peak-to-peak)

Input DDC Signal

5 Volts (peak-to-peak, TTL)

ESD Protection

-Human body model —±15kV (air-gap discharge) & ±8kV (contact discharge)

- Core chipset —±8kV

Input

2 x HDMI

Output

8 x Rj45

HDMI Connector

Type A (19 pin female)

RJ45 Connector

WE/SS 8P8C with 2 LED indicators

Dimensions (L x W x H)

17” x 6.2” x 1.8”

Power Supply

5V 4A DC

Power Consumption

13 Watt (max)

Environmental

Operating Temperature

32˚~ 104˚F (0˚to 40˚C)

Storage Temperature

-4˚~ 140˚F (-20˚~ 60˚C)

Relative Humidity

20~90% RH (no condensation)

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Avenview Extenseur

Avenview

Avenview FO-DVI-DL-330X Manuel utilisateur

Avenview

Avenview Cat5 Manuel utilisateur

Avenview

Avenview FO-HDM-1000M-EMI Manuel utilisateur

Avenview

Avenview HDM3D-C53X-SET Manuel utilisateur

Avenview

Avenview HDM-C6IPX-SET Manuel utilisateur

Avenview

Avenview KVM-C5 Series Manuel utilisateur

Avenview

Avenview VGA-C5RS-SET Manuel utilisateur

Avenview

Avenview HDM3D-C53X-SET Manuel utilisateur

Avenview

Avenview HDM-C6IP-SET Manuel utilisateur

Avenview

Avenview FO-DP4K-300-EMIX Manuel utilisateur

Avenview

Avenview FO-DP-XX-MM Manuel utilisateur

Avenview

Avenview DVI-C5-LC-R Manuel utilisateur

Avenview

Avenview HBT-C6BPOC-SET Manuel utilisateur

Avenview

Avenview FO-DP-300-EMI Manuel utilisateur

Avenview

Avenview HDM-C5SP-8SRSR Manuel utilisateur

Avenview

Avenview KVM-C5 Series Manuel utilisateur

Avenview

Avenview HDM-C6IP-SET Manuel utilisateur

Avenview

Avenview HDMI-C5-3-SET Manuel utilisateur

Avenview

Avenview DVI-C5-M-SET Manuel utilisateur

Avenview

Avenview HDMI-C5-3X-SET Manuel utilisateur

Avenview

Avenview FO-HDMI-XX-MM Manuel utilisateur

Avenview

Avenview FO-HDM-IP4K-SET Manuel utilisateur

Avenview

Avenview HBT2-C6POH-USB-SET Manuel utilisateur

Avenview

Avenview HDMI-C5-S Manuel utilisateur

Manuels Extenseur populaires d'autres marques

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

SC&T

SC&T HE03-4K Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur