Avenview FO-HDMI-SET Manuel utilisateur

www.avenview.com

HDMI Extender over Fiber Optic

User’s Guide

Models

FO-HDMI-SET

The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations

or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to

specifications and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual

property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes

no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied

warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.

Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly

prohibited.

www.avenview.com

Table of Contents

Section 1: Getting Started...................................................................................................................... 3

1.1 Important Safeguards ............................................................................................................ 3

1.2 Safety Instructions ................................................................................................................. 3

1.3 Regulatory Notices Federal Communications Commission (FCC) ......................................... 3

1.4 Introduction ........................................................................................................................... 4

1.5 Package Contents................................................................................................................... 4

1.6 Before Installation.................................................................................................................. 4

1.7 Installation ............................................................................................................................. 5

1.8 General Troubleshooting ....................................................................................................... 5

Section 2: Specifications......................................................................................................................... 6

2.1 Signal Pin Assignment .................................................................................................................. 6

www.avenview.com

Section 1: Getting Started

1.1 Important Safeguards

Please read all of these instructions carefully before you use the device. Save this manual for future

reference.

What the warranty does not cover

Any product, on which the serial number has been defaced, modified or removed.

Damage, deterioration or malfunction resulting from:

Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized

product modification, or failure to follow instructions supplied with the product.

Repair or attempted repair by anyone not authorized by us.

Any damage of the product due to shipment.

Removal or installation of the product.

Causes external to the product, such as electric power fluctuation or failure.

Use of supplies or parts not meeting our specifications.

Normal wear and tear.

Any other causes which does not relate to a product defect.

Removal, installation, and set-up service charges.

1.2 Safety Instructions

Do not dismantle the housing or modify the module.

Dismantling the housing or modifying the module may result in electrical shock or burn.

Refer all servicing to qualified service personnel.

Do not attempt to service this product yourself as opening or removing housing may expose you to

dangerous voltage or other hazards

Keep the module away from liquids.

Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid

falls or spills on to the housing, unplug the module immediately.

Have the module checked by a qualified service engineer before using it again.

1.3 Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed

to provide reasonable protection against harmful interference in a residential installation.

Any changes or modifications made to this equipment may void the user’s authority to operate this

equipment.

www.avenview.com

1.4 Introduction

Avenview FO-HDMI-SET consists of a Transmitter and Receiver that lets you extend HDMI signal from DVD

Player, Blu-ray Player Set-top box, console systems or other video equipments over fiber optical signal without

any signal degradation.

-High Speed and long distance transmission by Optical fiber (LC type Multi-Mode 4-ch fiber.

-Extends up to 100 meters (330 feet)

-Compatible with HDMI 1.3 Standard

-Backward compatibility with DVI Standard 1.0

-Supports HDCP compliant device

-Supports up to 1080p for HDTV and UXGA (1600 x 1200) resolution

-DDC and DEC signal line is transmitted by copper line (CAT5) between internal and external power

1.5 Package Contents

Before you start the installation of the converter, please check the package contents.

-Receiver x 1

-Transmitter x1

-Power Adapter (+5VDC, 1.2A) x1

-Copper male to male HDMI Cable (-.5m) x2

-User’s Manual

1.6 Before Installation

Put the product in an even and stable location. If the product falls down or drops, it may cause an

injury or malfunction.

Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high

humidity.

Use the DC power adapter with correct specifications. If inappropriate power supply is used then it

may cause a fire.

Do not twist or pull by force ends of the optical cable. It can cause malfunction.

www.avenview.com

1.7 Installation

To setup Avenview FO-HDMI-SET follow these steps for connecting to a device:

1. Power off display source such as DVD Player, Set-top box

2. Connect the enclosed copper HDMI cable into each display source and display

3. Connect copper HDMI cable which is attached to display source into FO-HDMI-SET Transmitter

4. Connect Transmitter to the HDMI cable (course) and Receiver to HDMVI Cable (display)

5. Connect the Optical cable (4ch-LC standard connector) between Transmitter and Receiver by order

no 1, 2, 3, 4

6. Connect the UTP cable (RJ45 connector) for DDC

7. Power on the source and display (check the LED light on of Transmitter and Receiver)

1.8 General Troubleshooting

Problem

Possible Solution

No Image

Check if connection to the computer and the monitor are

correct.

Check length of the cable between Transmitter and Receiver

Screen Defects Appear

This product supports up to UXGA resolution.

Check the DVI connection

Check the maximum resolution range of the graphics card.

If there is no LED light on, insert the enclosed external power adapter into

Transmitter.

www.avenview.com

Section 2: Specifications

Item

Description

Video Bandwidth

165MHz (Single Link)

Video Input

1 Single Link HDMI

Input Connector

1 HDMI Type A Receptacle

Video Output

1 Single Link HDMI

Power

5V 1.2A DC

Power Consumption

0.55Watt

Output Connector

1HDMI Type A Receptacle

Maximum Supported

Resolution

Up to 1080p

UXGA 1600 x 1200 @ 60Hz

Maximum Cable

Length

100 meters (330 feet)

Optical

Optical Source

850nm VCSEL

O/E Converter

PIN Photo Diode

Fiber Type

Multi-Mode Fiber

Environmental

Operation

0˚to 50˚C Degree

2.1 Signal Pin Assignment

Signal

TMDS Data 2+

TMDS Data2 Shield

TMDS Data 2-

TMDS Data 1+

TMDS Data 1 Shield

TMDS Data 1-

TMDS Data 0+

TMDS Data0 Shield

TMDS Data 0-

TMDS Clock+

TMDS Clock Shield

TMDS Clock-

CEC

Reserved (N.C. on device)

SCL

SDA

DDC/CEC Ground

+5V Power

Hot Plug Detect

www.avenview.com

Disclaimer

While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the

operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of

Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of

anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the

Avenview hardware, software, or other products and documentation provided herein.

Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability,

function or design. With respect to Avenview products which this document relates, Avenview disclaims all express or implied warranties

regarding such products, including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, and

non-infringement.

Table des matières

Autres manuels Avenview Extenseur

Avenview

Avenview VGA-C5A-SET Manuel utilisateur

Avenview

Avenview W-HDM3D-100-SET Manuel utilisateur

Avenview

Avenview HDM-C6VWIP-SET Manuel utilisateur

Avenview

Avenview FO-HDMI-1000M-EMI Manuel utilisateur

Avenview

Avenview C5-USB-200 Manuel utilisateur

Avenview

Avenview DVI-C5-M-SET Manuel utilisateur

Avenview

Avenview HDM3D-C53X-SET Manuel utilisateur

Avenview

Avenview HDM3D-C5SP-8 Manuel utilisateur

Avenview

Avenview HDMI-C5SP-4 Manuel utilisateur

Avenview

Avenview HDM3D-C5SP-4 Manuel utilisateur

Avenview

Avenview HDMI-C5SP-8SRSR Manuel utilisateur

Avenview

Avenview KVM-C5 Series Manuel utilisateur

Avenview

Avenview HDM-C5SP-8 Manuel utilisateur

Avenview

Avenview HDMI-C5-S Manuel utilisateur

Avenview

Avenview FO-HDM-SET Manuel utilisateur

Avenview

Avenview HDM-SHAREPRO-IP Manuel utilisateur

Avenview

Avenview HDM-C5SP-8SRSR Manuel utilisateur

Avenview

Avenview VGA-C5R-SET Manuel utilisateur

Avenview

Avenview FO8K-DP MM Series Manuel utilisateur

Avenview

Avenview FO-DVI-DL-330X Manuel utilisateur

Avenview

Avenview FO-DVI-DL-330 Series Manuel utilisateur

Avenview

Avenview W-HD3DIR-50M Manuel utilisateur

Avenview

Avenview FO-HDM4K-200-EMIX Manuel utilisateur

Avenview

Avenview HDM-SHAREPRO-IP Manuel utilisateur

Manuels Extenseur populaires d'autres marques

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

SC&T

SC&T HE03-4K Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur