Avenview FO-DVI-1080LC-Set Manuel utilisateur

www.avenview.com

FO-DVI-1080LC Series

User’s Guide

Models

FO-DVI-1080LC-Set

The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations

or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to

specifications and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual

property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes

no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied

warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.

Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly

prohibited.

www.avenview.com

Table of Contents

Section 1: Getting Started...................................................................................................................... 3

1.1 Important Safeguards ............................................................................................................ 3

1.2 Safety Instructions ................................................................................................................. 4

1.3 Regulatory Notices Federal Communications Commission (FCC) ......................................... 4

1.4 Introduction ........................................................................................................................... 4

1.5 Package Contents................................................................................................................... 4

1.6 Before Installation.................................................................................................................. 5

1.7 Installation ............................................................................................................................. 5

1.8 General Troubleshooting ....................................................................................................... 6

Section 2: Specifications......................................................................................................................... 7

www.avenview.com

Section 1: Getting Started

1.1 Important Safeguards

Please read all of these instructions carefully before you use the device. Save this manual for future

reference.

What the warranty does not cover

Any product, on which the serial number has been defaced, modified or removed.

Damage, deterioration or malfunction resulting from:

Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized

product modification, or failure to follow instructions supplied with the product.

Repair or attempted repair by anyone not authorized by us.

Any damage of the product due to shipment.

Removal or installation of the product.

Causes external to the product, such as electric power fluctuation or failure.

Use of supplies or parts not meeting our specifications.

Normal wear and tear.

Any other causes which does not relate to a product defect.

Removal, installation, and set-up service charges.

www.avenview.com

1.2 Safety Instructions

Do not dismantle the housing or modify the module.

Dismantling the housing or modifying the module may result in electrical shock or burn.

Refer all servicing to qualified service personnel.

Do not attempt to service this product yourself as opening or removing housing may expose you to

dangerous voltage or other hazards

Keep the module away from liquids.

Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid

falls or spills on to the housing, unplug the module immediately.

Have the module checked by a qualified service engineer before using it again.

1.3 Regulatory Notices Federal Communications Commission (FCC)

This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed

to provide reasonable protection against harmful interference in a residential installation.

Any changes or modifications made to this equipment may void the user’s authority to operate this

equipment.

1.4 Introduction

Avenview FO-DVI-1080LC Series with fiber optic cable system lets you extend digital flat panel signal up to 100

meters (330 feet).

-High Speed and long distance transmission by LC type Multi-Mode fiber

-Use standard DVI Plug and LC Fiber connector

-R, G, B, Clock signal is transmitted separately by Multi-Mode optical Fiber

-Supports up to WUXGA (1920 x 1200) resolution

-Self detecting function for EDID

-Optional external power supply (Automatic Power switch is included)

1.5 Package Contents

Before you start the installation of the converter, please check the package contents.

-Transmitter x 1 pc

-Receiver x1 pc

-Power Adapter (5VDC, 1.2A)

-User’s Manual

www.avenview.com

1.6 Before Installation

Put the product in an even and stable location. If the product falls down or drops, it may cause an

injury or malfunction.

Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high

humidity.

Use the DC power adapter with correct specifications. If inappropriate power supply is used then it

may cause a fire.

Do not twist or pull by force ends of the optical cable. It can cause malfunction.

1.7 Installation

This product is composed of a transmitter and a receiver. The transmitter should be connected to the

computer’s DVI Port and the receiver should be connected the DVI Port of the digital display device. Avenview

FO-DVI-1080LC Transmitter is designed to be used with the LC type standard optical cable. It is marked with R,

G, B, O. Connect “R” to Red color, “G” to Green color, “B” to blue and “O” to orange color connector.

Connection diagram of FO-DVI-1080LC

Use the DC adapter (included in the package) for the Receiver. The Transmitter which is

connected to a computer uses power from the computer.

www.avenview.com

Avenview FO-DVI-1080LC is designed to self detect the resolution of the monitor and change the resolution

accordingly. Follow these steps for connecting to a device:

1. Power on your display

2. Connect Transmitter to the DVI of display

3. Plug the DC power of Transmitter

4. Pull out after about 5 –10 seconds for reading the EDID information from the display

5. Connect Transmitter to the PC and Receiver to the Display.

6. At the same time, connect DC power to the receiver

7. Connect the optical fiber between Transmitter and Receiver.

8. Restart the computer.

1.8 General Troubleshooting

Problem

Possible Solution

No Image

Check if the PC Power is on

Check if connection to the computer and the monitor are

correct.

Turn the PC Power off and on again.

Screen Defects Appear

This product supports up to SXGA resolution.

Check the maximum resolution range of the graphics card.

www.avenview.com

Section 2: Specifications

Item

Description

Video Bandwidth

1.65Gbps (Single Link)

Connector

DVI 24Pin Plug and LC Connector

Power Consumption

0.75 Watt (max)

Supported Resolution

and Distance

SXGA 1280 x 1024 @ 700 meters (2300 feet)

UXGA 1600 x 1200 @ 500 meters (1650 feet)

WUXGA 1920 x 1200 @ 100 meters (330 feet)

Optical

Optical Source

850nm VCSEL

O/E Converter

PIN Photo Diode

Fiber Type

50/125 or 62.5/125 LC Multi-Mode Fiber

Environmental

Operation

0˚to 50˚C Degree

Storage

-20˚ to 70˚C Degree

www.avenview.com

Disclaimer

While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the

operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of

Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of

anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the

Avenview hardware, software, or other products and documentation provided herein.

Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability,

function or design. With respect to Avenview products which this document relates, Avenview disclaims all express or implied warranties

regarding such products, including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, and

non-infringement.

Autres manuels pour FO-DVI-1080LC-Set

Table des matières

Autres manuels Avenview Extenseur

Avenview

Avenview HBT-C6BPOC-SET Manuel utilisateur

Avenview

Avenview FO-DVI-1000X-EMIX Manuel utilisateur

Avenview

Avenview HDM-C5SP-8 Manuel utilisateur

Avenview

Avenview FO-DVI-1000M-EMI Manuel utilisateur

Avenview

Avenview FO-DP-XX-MM Manuel utilisateur

Avenview

Avenview DVI-C5-LC-R Manuel utilisateur

Avenview

Avenview HDM3D-C53X-SET Manuel utilisateur

Avenview

Avenview KVM-C5 Series Manuel utilisateur

Avenview

Avenview VGA-C5R-SET Manuel utilisateur

Avenview

Avenview FO-DVI-1080X-SET Manuel utilisateur

Avenview

Avenview HDM-C5-R-M Manuel utilisateur

Avenview

Avenview KVM-C5 Series Manuel utilisateur

Avenview

Avenview WL-VGA-EXT Manuel utilisateur

Avenview

Avenview HDMI-C5-4 Manuel utilisateur

Avenview

Avenview HDMI-C5SP-8SRSR Manuel utilisateur

Avenview

Avenview USB-C6-50M Manuel utilisateur

Avenview

Avenview HDM-C6IP-SET Manuel utilisateur

Avenview

Avenview FO-HDMI-XX-MM Manuel utilisateur

Avenview

Avenview VTS-C5-R Manuel utilisateur

Avenview

Avenview FO8K-DP MM Series Manuel utilisateur

Avenview

Avenview HDM3D-C5SP-4 Manuel utilisateur

Avenview

Avenview HDMI-C5SP-4 Manuel utilisateur

Avenview

Avenview VGA-C5A-R Manuel utilisateur

Avenview

Avenview HDM-SHAREPRO-IP Manuel utilisateur

Manuels Extenseur populaires d'autres marques

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

SC&T

SC&T HE03-4K Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur