Avenview HBT-C6BPOC-SET Manuel utilisateur

VIDEO WALLS VIDEO PROCESSORS

VIDEO MATRIX SWITCHES

EXTENDERS SPLITTERS WIRELESS

CABLES & ACCESSORIES

Control Your Video

HDMI HDBaseT CAT5/6/7 Extender Set

with Bi-directional/IR/RS-23/PoC

The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or

warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications

and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted

by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims

any express or implied warranty, relating to its products of Avenview Inc. is strictly prohibited.

Model #: HBT-C6BPOC-SET

1/2015

Military Residential

Medical Aviation

Education Industrial

Corporate House Of Worship

www.avenview.com

Product Application & Market Sectors

www.avenview.com Page

TABLE OF CONTENTS

1. GETTING STARTED ..........................................................................................................................1

1.1 IMPORTANT SAFEGUARDS..............................................................................................................1

1.2 SAFETY INSTRUCTIONS ..................................................................................................................1

1.3 REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISSION (FCC) ........................... 2

2. INTRODUCTION ..............................................................................................................................3

2.1 PACKAGE CONTENTS .....................................................................................................................4

2.2 BEFORE INSTALLATION...................................................................................................................4

2.3 APPLICATION DIAGRAM..................................................................................................................5

2.4 PANEL DESCRIPTION.......................................................................................................................6

2.4.1 INPUT PANEL (Receiver,HBT-C6BPOC-SET) Front ...............................................................6

2.4.2 INPUT PANEL (Receiver, HBT-C6BPOC-SET) Rear................................................................6

2.4.3 INPUT PANEL (Receiver, HBT-C6BPOC-SET) Front ..............................................................7

2.4.4 INPUT PANEL (Receiver, HBT-C6BPOC-SET) Rear................................................................7

3. IR EXTENDERS ..................................................................................................................................8

4. INSTALLATION (HBT-C6BPOC-SET) ..............................................................................................9

5. GENERAL TROUBLESHOOTING.....................................................................................................9

6. CABLE SPECIFICATION ..................................................................................................................10

7. SPECIFICATIONS .............................................................................................................................11

www.avenview.com Page

SECTION 1: GETTING STARTED

1.1 IMPORTANT SAFEGUARDS

Please read all of these instructions carefully before you use the device. Save this manual for future reference.

What the warranty does not cover

•Any product, on which the serial number has been defaced, modified or removed.

•Damage, deterioration or malfunction resulting from:

•Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to

follow instructions supplied with the product.

•Repair or attempted repair by anyone not authorized by us.

•Any damage of the product due to shipment.

•Removal or installation of the product.

•Causes external to the product, such as electric power fluctuation or failure.

•Use of supplies or parts not meeting our specifications.

•Normal wear and tear.

•Any other causes which does not relate to a product defect.

•Removal, installation, and set-up service charges.

1.2 SAFETY INSTRUCTIONS

The HBT-C6BPOC-SET, HDMI HDBaseT Extender SET has been tested for conformance to safety regulations and

requirements, and has been certified for international use. However, like all electronic equipments, the HBT-C6BPOC-SET

should be used with care. Read the following safety instructions to protect yourself from possible injury and to minimize the

risk of damage to the unit.

!Do not dismantle the housing or modify the module.

!Dismantling the housing or modifying the module may result in electrical shock or burn.

!Refer all servicing to qualified service personnel.

!Do not attempt to service this product yourself as opening or removing housing may expose you to dangerous voltage

or other hazards

!Keep the module away from liquids.

!Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid falls or spills on

to the housing, unplug the module immediately.

!Have the module checked by a qualified service engineer before using it again.

!Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.

1. GETTING STARTED

www.avenview.com Page

1.3 REGULATORY NOTICES FEDERAL COMMUNICATIONS COMMISSION (FCC)

This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation.

Any changes or modifications made to this equipment may void the user’s authority to operate this equipment.

Warning symbols Description

ONLY USE THE PROVIDED POWER CABLE OR POWER

ADAPTER SUPPLIED. DO NOT TAMPER WITH THE

ELECTRICAL PARTS. THIS MAY RESULT IN ELECTRICAL

SHOCK OR BURN.

DO NOT TAMPER WITH THE UNIT. DOING SO WILL

VOID THE WARRANTY AND CONTINUED USE OF THE

PRODUCT.

THE VIDEO BOARDS ARE VERY SENSITIVE TO STATIC.

PLEASE ENSURE IF RACK MOUNTED OR INSTALLED ON A

SURFACE, IT SHOULD BE IN A GROUNDED ENVIROMENT.

www.avenview.com Page

2. INTRODUCTION

The Avenview HBT-C6BPOC-SET HDMI HDBaseT CAT5/6/7 Extender SET extends high definition video, multi-channel

digital audio, data formats IR/RS232 and POC up to 100m (330ft) to any HD Monitor.

Video Signals: 4K2K@30 (Ultra HD), 3D, 8/10/12 Deep Color, and Full HD 1080p@60 Hz/48-bit color depth.

Audio signals: Uncompressed 7.1ch digital

Data Signals: Bi-Directional IR signals 30 KHz to 50 KHz and RS-232 over CAT5/6.

The HBT-C6POE-SET includes two (2) units: Sending unit (TX) HBT-C6BPOC-S and Receiving unit (RX) HBT-C6BPOC-R

with one (1) UTP output port which allows the user to extend video, audio and data signals up to 100m (330ft). The HBT-

C6POE-SET also allows bi- directional IR control and RS-232 connected to the TX unit, allowing the users to use any IR

remote and third party RS-232 control at the monitor side . The HBT-C6POE-SET offers the most convenient solution for

extending an application over long distances with A/V transmission @10G.

- Input: HDMI with 3D & 4Kx2K, 1080p,HDCP and DVI compliant

- Extend the transmission: Full HD 1080p up to 100m (330ft) from the HDMI source 48-bit and

-Extend the transmission: 4K2K@30 up to 80m (264ft)

- Support PoC (Power over Cable) power either units from the TX or RX side with one power supply

- Supports HDCP & EDID Bypass

- Supports CEC bypass

- Audi Supported: 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio - DTS-

- Support full frequency IR signal from 20KHz to 60KHz

- Bi-directional IR pass-through

- 3D support: Follow by Display / TV’s EDID

- Full Duplex RS-232 control up to 115,200 bps

- Wall mounting bracket included

Features

NOTE

The QUALITY and TRANSMISSION of the video signals depends on the characteristics and

quality of the UTP cables. Higher resolutions and longer transmission distances require

low skew cables (<25ns/100m) for best performance. Unshielded CAT6 with

metal RJ-45 connectors is recommended.

www.avenview.com Page

2.1 PACKAGE CONTENTS

Before you start the installation of the Extender/Splitter, please check the package contents.

HBT-C6BPOC-SET ICLUDES:

X 1

2POWER BRICK (24V 1.5A DC) X 1

6USER’S MANUAL X 1

2.2 BEFORE INSTALLATION

•Put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction.

•Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity.

•Use the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire.

•Do not twist or pull by force ends of the UTP cable. It can cause malfunction.

HBT-C6BPOC-S (TX)

HBT-C6BPOC-R (RX) X 1

To achieve best results with our HBT-C6BPOC-SET we highly recommend a premium quality 26 or 24

AWG HDMI cable with the below specifications to maintain signal integrity and distances.



Length: 5m (16ft) to 15m (50ft)

Bandwidth: 10.2 Gbps data transfer rate

Supports Resolution: Up to 3840x2160 @ 24Hz and 4096x2160 @ 24Hz, 1080p @ 24Hz / 50/60Hz/3D

Conductor gauge: 26 / 24 AWG

Deep Color

3D Capable

CEC

Ethernet Channel

Audio Return Channel

Connector 1: HDMI (Type A) Male

Connector 2: HDMI (Type A) Male

IR RECEIVER

POWER CORD C7

IR EXTENDER

X 1

www.avenview.com Page

2.3 APPLICATION DIAGRAM

www.avenview.com Page

2.4 PANEL DESCRIPTION

2.4.1 INPUT PANEL (Transmitter, HBT-C6BPOC-S) Front

1. LED LIGHTS:

- POWER LED: Steady LED light ON

- STATUS LED: Blinking LED Light indicates

- LINK LED: Always ON LED light indicates link is established

- HDCP LED: HDCP ON - Always ON LED Light

HDCP OFF - LED light blinking

2.4.2 INPUT PANEL (Transmitter, HBT-C6BPOC-S) Rear

2.POWER JACK: Power supply connection 3.CAT5/6:Connect UTP cable for

transmitting video, audio , data and POC

upto 100m to the Receiver unit.

4.IR EXTENDER: Plug the IR Extender cable for

IR signal being received. Place IR Extender within

direct line of site with the IR Remote.

5.IR BLASTER:Plug the IR Blaster cable for IR

signal being transmitted. Place IR Blaster within

direct site of the device being controlled.

6. RS-232: Connect to a device that has the ability

to send control commands (PC or laptop via D-

Sub 9-pin male cable)

7. HDMI IN:Connect HDMI source Max 35ft

via HDMI Cable Blu-ray player or Digital

player

www.avenview.com Page

2.4.3 INPUT PANEL (Receiver, HBT-C6BPOC-R) Front

2.4.4 INPUT PANEL (Receiver, HBT-C6BPOC-R) Rear

8.LED LIGHTS:

- POWER LED: Steady LED light ON

- STATUS LED: Blinking LED Light indicates

- LINK LED: Always ON LED light indicates link is established

- HDCP LED: HDCP ON - Always ON LED Light

HDCP OFF - LED light blinking

9.POWER JACK: Power supply connection 10.CAT5/6: Connect UTP cable for receiving

video, audio , data and POC upto 100m

from the Transmitter unit.

11.IR EXTENDER: Plug the IR Extender cable for

IR signal being received. Place IR Extender within

direct line of site with the IR Remote.

12.IR BLASTER:Plug the IR Blaster cable for IR

signal being transmitted. Place IR Blaster within

direct site of the device being controlled.

13.RS-232: Connect to a device that has the ability

to send control commands (PC or laptop via D-

Sub 9-pin male cable)

14.HDMI OUT:Connect to HDMI Display/

Monitor

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Avenview Extenseur

Avenview

Avenview HBT-C6POE-SET Manuel utilisateur

Avenview

Avenview HDM-SHAREPRO-IP Manuel utilisateur

Avenview

Avenview HBT2-C6POH-USB-SET Manuel utilisateur

Avenview

Avenview HDMI-C5-S Manuel utilisateur

Avenview

Avenview HDMI-C5-3X-SET Manuel utilisateur

Avenview

Avenview VGA-C5-SP-4 Manuel utilisateur

Avenview

Avenview FO-DP-300-EMI Manuel utilisateur

Avenview

Avenview VGA-C5-SP-4 Manuel utilisateur

Avenview

Avenview FO-DP4K-300-EMIX Manuel utilisateur

Avenview

Avenview HDM-C5SP-8 Manuel utilisateur

Avenview

Avenview HDM-C6IP-SET Manuel utilisateur

Avenview

Avenview HDMI-C5-4 Manuel utilisateur

Avenview

Avenview FO-DP-XX-MM Manuel utilisateur

Avenview

Avenview FO-VGA-DVI Manuel utilisateur

Avenview

Avenview HDM-SHAREPRO-IP Manuel utilisateur

Avenview

Avenview HBT2-C6BPOC-SET Manuel utilisateur

Avenview

Avenview FO8K-DP MM Series Manuel utilisateur

Avenview

Avenview HDM-C6VWIP-SET Manuel utilisateur

Avenview

Avenview HDM3D-C5SP-4 Manuel utilisateur

Avenview

Avenview FO-DVI-1080X-SET Manuel utilisateur

Avenview

Avenview DVI-C5-R Manuel utilisateur

Avenview

Avenview VGA-C5RS-SET Manuel utilisateur

Avenview

Avenview HDM3D-C5IR-SET Manuel utilisateur

Avenview

Avenview HDMI-C5-3-SET Manuel utilisateur

Manuels Extenseur populaires d'autres marques

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

SC&T

SC&T HE03-4K Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur