Atdec AF-AA Manuel utilisateur

AF-AA Page 1 of 4

COMPONENT CHECKLIST

Monitor

arm

(x1)

Hand grip assembly

(x1)

VESA

head

(x1)

Rotation

limiter

(x1)

Security Screw

M4 x 16mm

(x1)

Mounting

screws

M4 x 10mm

(x4)

Mounting

screws

M4 x 12mm

(x4)

Mounting

screws

M4 x 16mm

(x4)

Primary arm

cable cover

(x1)

Secondary arm

cable cover

(x1)

Installation Guide

AF-AA

Accessory Arm

IMPORTANT INFORMATION

! Please ensure this product is installed as per these installation instructions.

! This product is compatible with the range of AF Poles and arms.

! The manufacturer accepts no responsibility for incorrect installation.

REQUIRED TOOLS

WEIGHT RANGE

• Phillips Head Screwdriver

0 - 8kg

(0 - 17.6lbs)

AF-AA Page 2 of 4

1. Install VESA monitor head

2. Install arm assembly

5mm

Allen Key

Pole

Top Cap

Spacers (may be required

for recessed and uneven

surfaces)

VESA monitor

head

Screen

M4x10/12/16mm

Phillips Head Mounting

Screws

1.1 Install VESA monitor head as shown.

2.1 Remove Top Cap and Allen key

from existing AF- pole product

2.4 Place arm and

handgrip on to the pole

Note Ensure handgrip tab

lines up with slot in pole

2.5 Turn the handgrip to fix the height of the arm

and place the top cap back on to the pole

2.3 Place handgrip tab

in arm assembly

100mm

Arm Assembly

2.2 OPTIONAL ROTATION LIMITER

Insert rotation limiter for 180�

rotation around mounting pole

AF-AA Page 3 of 4

4.1 Unlock Handgrip ensuring both the

screen and arm assembly are supported

4.2 Lift/Lower the Screen to the desired

height. Move both Screen and Arm

assembly together

4.3 Lock Handgrip firmly

4. Adjusting Height

5. Cable Management

3. Mounting Monitor

VESA monitor head

Arm Assembly

3.2 OPTIONAL SECURITY SCREW

Ensure the Monitor is supported, then loosen the Monitor head

screw with the 5mm Allen Key and tilt screen up before installing

the M4 x 16mm Security Screw into the Security Screw hole

Note: Support Screen

when adjusting tilt.

3.1 Insert VESA monitor head into

the receptacle in the Arm Assembly

5mm Allen Key

Phillips Head

Screwdriver

Loosen

Tighten

Security Screw

Hole

M4 x 16mm

Security Screw

Monitor head

screw

Lock Slot

Elbow Joint

‘click’

Lock Slot

Elbow Joint

‘click’

5.1 After plugging in your cables,

install the Cable Covers.

Insert Cable Covers

up into Lock Slots.

5.2 Push Cable Covers away from

Elbow Joint to secure in place.

5.3 Cable Clips and Cable Stops can be installed

to further manage cables.

Cable Stop

Cable Clip

Note: Ensure enough cable

slack is given to allow for

movement.

AF-AA Page 4 of 4

Adjusting the Display Bracket

Portrait/ Landscape Tilt (Screen angle up/down) Pan (Screen angle left/right)

5mm Allen Key

Tighten

Loosen

No Allen Key necessary No Allen Key necessaryNote: Support Screen when adjusting tilt.

5. Cable Management (Cont)

Press down firmly onto the

other edge of the Cable Stop

and hold. This allows the rear

profile to flex in place

Insert Cable Stop on one edge of

the Pole Slot

Allen Key

Storage

atdec.com | atdec.co.uk | atdec.com.au

No portion of this document or any artwork contained herein should be reproduced in any way without

the express written consent of Atdec Pty Ltd. Due to continuing product development, the manufacturer

Table des matières

Autres manuels Atdec Support et étagère

Atdec

Atdec 8060 Manuel utilisateur

Atdec

Atdec ADBS-3x1-30TW Manuel utilisateur

Atdec

Atdec TH-1026-VF Manuel utilisateur

Atdec

Atdec AWM-A46-B Manuel utilisateur

Atdec

Atdec AWMS-2-LTH75-H Manuel utilisateur

Atdec

Atdec TH-3060-UF Manuel utilisateur

Atdec

Atdec AWM-W35 Manuel utilisateur

Atdec

Atdec AWMS-BT40 Manuel utilisateur

Atdec

Atdec Spacedec SD-POS-VBM-B2B Manuel utilisateur

Atdec

Atdec AF Series Manuel utilisateur

Atdec

Atdec Visidec Focus Micro Manuel utilisateur

Atdec

Atdec AWM-A13 Manuel utilisateur

Atdec

Atdec AWMS-2-BT75 Manuel utilisateur

Atdec

Atdec AF-M Manuel utilisateur

Atdec

Atdec AWM-A13-B Manuel utilisateur

Atdec

Atdec VFS-DH Manuel utilisateur

Atdec

Atdec AWM-LR Manuel utilisateur

Atdec

Atdec AWMS-2-BT75-FS Manuel utilisateur

Atdec

Atdec AWMS-2-BT75-H Manuel utilisateur

Atdec

Atdec AWM-W35 Manuel utilisateur

Atdec

Atdec VFS-Q Manuel utilisateur

Atdec

Atdec Telehook Manuel utilisateur

Atdec

Atdec AD-WM-5060 Manuel utilisateur

Atdec

Atdec Visidec Freestanding Double Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur