Atdec Spacedec SD-POS-VBM-B2B Manuel utilisateur

A. Determine the degree of

rotation you require. (Refer to

Mounting Options above)

B. To Limit the Rotation,

use the 2.5mm Allen Key to

insert the supplied M5

Grub Screw into your

chosen Locking Hole until it

sits flush with the Base Plate.

NOTE: Ifyou want the full

355° rotation, you doNOT

need toinstall a grub screw.

Step 1. Limit Rotation

Component Checklist (Check you have received all parts against the Component Checklist below)

M4x10mm Screws (x4)

M4x16mm Screws (x4)

POS Assembly (x1)

Hardware

2.5mm Allen Key (x1)

M4x12mm Screws (x4)

Installation Instructions

Installation Template

(x1)

M5 Grub Screw (x1)

4 x Ø3mm (1/8”)

Pilot Holes

Centre for

45mm(1¾”) Cable

Access Hole

Mounting Options

A. Position the Installation

Template in the desired location

on your work surface. Ensure the

straight edge sits perpendicular

with the User’s line of sight. Mark

the center points of each of the

required holes onto the work

surface with a pencil.

B. Drill 4 x 3mm (1/8”) Pilot

Holes to a depth of 15mm (9/16”).

Use a 45mm (1¾”) hole saw to

drill the Cable Access Hole in the

work surface.

C. Reposition POS Multi with

the “Direction Arrow” pointing in

the direction required for your

chosen rotation. Secure the POS

to the work surface using the

supplied 14 Gauge Screws (x4).

INSTALLATION

TEMPLATE

Top Cap (x1)

Screw Cover

(x1)

14 Gauge Screws (x4)

0° Locking Hole (Fixed)

0-180° Locking Hole

0-270° Locking Hole

0-90° Locking Hole

Direction Arrow

Locking Holes

Rotation Options

0° Rotation (Fixed)

0-90° Rotation

0-180° Rotation

0-270° Rotation

0-355° Rotation

M5x75mm Screws

(To suit 70mm

4x M5

Cable Management

Hole

14 Gauge

Screws (x4)

Ø45mm

(1¾”) Cable

Access Hole

4 x Ø3mm (1/8”)

Pilot Holes

USER

5° Gap in

Rotation

USER

Step 2. Locate and Secure your POS Multi

5° Gap in

Rotation

270°

180°

0°

90°

270°

180°

0°

90°

355°

M5 Grub Screw

Your POS Multi offers 355° of

Rotation. This can also be limited

to suit a specific application.

The Direction in which you

mount POS Multi will determine

where the 5° gap in Rotation is

located, and how you choose to

limit the rotation.

2.5mm Allen Key

Base Plate

Direction

Arrow

Direction

Arrow

2mm Allen Key (x1)

Display | POS Multi

SD-POS-VBM

Security Screw (x1)

Tightening Tool (x1)

VESA plate (x1)

A. Loop the Security Cable

(Kensington or similar)

around the internal post

of the POS Assembly.

B. Feed the other

end

of the cable through

the POS Assembly and

out the Cable

Management Hole.

C. After you have attached the monitor

(As directed in Step 8) install the lock to the

monitor as per the manufacturer guidelines.

Step 5. Install Top Cap

Step 4. (Optional) Install Monitor Security Cable (Security Cable NOT Included)

Prior to attaching your monitor,

install the monitor cables.

Run them through the Cable

Management Hole, down the

pole and out the Cable Access

Hole in the work surface.

Step 6. Install Monitor Cables

Top Cap Cable

Management

Hole

OUT

Step 3. Attach Screw Cover

Remove the paper backing from the Screw

Cover and adhere to the POS base as shown.

Screw

Cover

These Installation Instructions secure

the POS Multi using the provided

fasteners from above thework surface.

For advanced Security Installation from

below the work surface. Please refer to

the Advanced Security Installation

Addendum.

No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.

Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published: 27.07.09 ©

Position your Display to the desired viewing

angle, using the 40° angular movement

allowed by the VESA Ball Mount.

If the display does not hold its position,

or is too resistant, adjust the Tension Plate

(see diagram right).

To make any adjustments, use the

Tightening Tool supplied.

Top of

Display

There are two mounting hole configurations:

UÊÇxÊÝÊÇx

UÊ£ääÊÝÊ£ää

Choose appropriate Mounting Screws

from the Hardware supplied to suit

your Display.

Mounting Screws (x4)

VESA Plate

Back of Display

Çx

(3”) £ää

(4”)

Çx

(3”)

£ää

(4”)

Step 7. Attach the VESA plate to your Display

Step 8. Attach your Display to the POS Assembly

Step 9. Adjust the VESA Ball Mount Advanced Security Installation

PUSH

Push down firmly to attach the Top Cap.

Hook the top of the VESA plate onto

the Quickshift Mount.

Gently push the bottom of the Display

into the Mount until you hear a ‘CLICK’.

Insert the Security Screw, and tighten

using the 2mm Allen Key supplied.

Tighten (+Kg)

Loosen (-Kg)

Tension

Plate

Tightening

Tool

Security

Screw

CLICK

PUSH

HOOK

TIGHTEN

Back of Display

2mm

Allen Key

Advanced Security Installation Addendum

Step 1. Purchase M4 Fasteners

Using the M4 Security Holes, your POS

Multi can be secured from beneath the

work surface for greater security.

Determine the length of Screw

you require using the formula shown,

and purchase 4x M4 Screws and

Washers, with your chosen drive type.

Screw Length Formula Security Holes

A. Position the Installation Template in the desired location on your work surface. Ensure the straight edge sits

perpendicular with the User’s line of sight. Mark the center points of each of the Security Holes, and Cable Access

Hole onto the work surface with a pencil.

B. Drill 4 x 5mm (0.18”) holes through the work surface (Take care to drill perpendicular to the

work surface). Use a 45mm (1.77”) hole saw to drill the Cable Access Hole in the work surface.

C. Reposition POS Multi with the “Direction Arrow” pointing in the direction required for your chosen rotation.

(Refer to the Mounting Options in POS Multi Installation Instructions) Secure the POS to the Desktop using the

purchased M4 fasteners (x4).

Step 2. Locate and Secure your POS Multi

No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.

Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published: 23.07.09 ©

NOTE: Return to POS Multi or Back-to-Back Installation Instructions to finish Installation

Work Surface

Washer

Thickness

5mm (0.18”)

Length =

Thread

Security

Holes

4 x Security Hole

Centre Point

Centre for

45mm (1.77”) Cable

Access Hole

Ø45mm(1.77”)

Cable Access

Hole

M4 Screws

NOT

Provided

M4 Washers

Ø5mm (0.18”)

Mounting

Holes (x4)

Drive Type

INSTALLATION

TEMPLATE

USER

Display | POS Multi

SD-POS-VBM

SD-POS-VBM-B2B

SD-POS-HA

SD-POS-HA-B2B

Ce manuel convient aux modèles suivants

Autres manuels Atdec Support et étagère

Atdec

Atdec SD-AT-DW Manuel utilisateur

Atdec

Atdec AWMS-2-BT75-H Manuel utilisateur

Atdec

Atdec Visidec Focus Micro Manuel utilisateur

Atdec

Atdec Focus VF-AT-NP Manuel utilisateur

Atdec

Atdec AD-WFP-5040 Manuel utilisateur

Atdec

Atdec AWMS-2-BT75-G Manuel utilisateur

Atdec

Atdec SYSTEMA SW6S Manuel utilisateur

Atdec

Atdec AD-TVC-70R Manuel utilisateur

Atdec

Atdec AWM-HS Manuel utilisateur

Atdec

Atdec AWMS-3-137140-C Manuel utilisateur

Atdec

Atdec AWM-LR Manuel utilisateur

Atdec

Atdec AWM-A13 Manuel utilisateur

Atdec

Atdec A F -AT-W Manuel utilisateur

Atdec

Atdec AF-AT-NBC Manuel utilisateur

Atdec

Atdec A-STSWW-A Manuel utilisateur

Atdec

Atdec AWM-W35 Manuel utilisateur

Atdec

Atdec AF-AN Manuel utilisateur

Atdec

Atdec AWMS-2-BT75-FS Manuel utilisateur

Atdec

Atdec AWM-BT Manuel utilisateur

Atdec

Atdec AF-AT Manuel utilisateur

Atdec

Atdec Freestanding Quad Manuel utilisateur

Atdec

Atdec AWM 710 Arm Manuel utilisateur

Atdec

Atdec TH-1040-CTS Manuel utilisateur

Atdec

Atdec AWMS-2-BT75-FS Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur