AT&T EP562 Manuel utilisateur

User’s manual

EP562

Expansion 5.8 GHz digital

cordless handset

For use with the AT&T EP5632/

EP5632-2 telephone system with

BLUETOOTH®wireless technology

Congratulations

on purchasing your new AT&T product.

Please read this user’s manual for the information

necessary to install your new AT&T product. For

complete instructions, please refer to the manual

provided with your EP5632/EP5632-2 telephone,

which can be downloaded from our website at

www.telephones.att.com or call

1 (800) 222-3111.

In Canada dial 1 (866) 288-4268.

Model #: EP562

Product name: 5.8GHz expansion digital cordless handset

Serial #:

(found on the bottom of the charger)

Purchase date:

Place of purchase:

AT&T and the AT&T logo are trademarks of AT&T Knowledge Ventures,

licensed to Advanced American Telephones. Printed in China.

The BLUETOOTH® word mark and logos are owned by Bluetooth SIG, Inc. and any use of

such marks by Advanced American Telephones and its parent, VTech Holdings Limited, is

under license. VTech Holdings Limited is a member of Bluetooth SIG, Inc. Other trademarks

and trade names are those of their respective owners.

Please read and follow these instructions carefully:

• Use only the supplied rechargeable battery or

replacement battery.

• Observe the proper polarity orientation between the

battery and handset during the battery installation.

• Do not dispose the battery in a fire. Check with

local codes for special disposal instructions.

• Do not open or mutilate the battery. Released

electrolyte is corrosive and may cause damage to

the eyes or skin. It may be toxic if swallowed.

• Exercise care in handling batteries in order not to

create a short circuit with conductive materials such

as rings, bracelets, and keys. The battery or

conductor may overheat and cause harm.

• Charge the supplied battery or replacement battery

with this product only in accordance with the

instructions and limitations specified in this manual.

• Do not disassemble your telephone. There are no user-

serviceable parts inside. Refer to qualified service

personnel for servicing.

Before you begin

you must install and charge the battery,

see page 2 for Battery installation instructions.

Getting started

Parts checklist

Your new AT&T EP562 expansion handset includes:

Cordless

telephone

handset

Handset

battery

Belt clip

Handset

battery

compartment

cover

User's manual Charger and

power adapter

BATTERY PACK

80-5808-00-00

Table of contents

User’s manual

EP562

Expansion 5.8 GHz digital

cordless handset

For use with the AT&T EP5632/EP5632-2

telephone system with

BLUETOOTH®wireless technology

Getting started

Battery installation.......................2

Battery charging............................3

Adding your new

handset..............................................4

Replacing a handset....................5

Quick reference

guide...................................................6

Handset main menu....................7

Belt clip & optional headset...8

Appendix

Troubleshooting.......................9

Technical

specifications.........................14

Important safety

information..............................15

FCC..............................................19

Limited warranty...................22

Getting started

Press the tab and

slide the battery

compartment

cover downwards.

Insert the supplied

battery as indicated.

Insert the top edge

(contacts and tab)

in first, then push

downwards on the

lower portion of the

battery.

Align the cover

flat against

the battery

compartment

cover, then slide

it upwards until

it clicks into

place.

IMPORTANT INFORMATION

•

Use only the battery supplied with this product. To order a

replacement battery (AT&T model 103, part number

89-0429-00-00) or equivalent, visit our website at

www.telephones.att.com, or call 1 (800) 222-3111.

In Canada dial 1 (866) 288-4268.

BATTERY PACK

80-5808-00-00

Step 1Step 2Step 3

Battery installation

Install the battery as shown below. After installing the battery,

you need to register the handset with the telephone base (page

4). Once registered, you can make and receive calls. For optimal

performance, charge the handset battery for at least 16 hours

before use (page 3).

Getting started

Charge the handset face up in telephone base, or place the

handset in the additional charger. The CHARGE light will be on

when charging.

Battery charging

When fully charged, the handset battery provides approximately

five hours of talk time and three days of standby time. For optimal

performance, charge the handset battery for at least 16 hours

before use.

12:00AM

IMPORTANT INFORMATION

1. Use only the power adapter supplied with this product. To order

a replacement power adapter, visit our website at

www.telephones.att.com, or call 1 (800) 222-3111.

In Canada dial 1 (866) 288-4268.

2. The power adapter is intended to be correctly oriented in a

vertical or floor mount position.

Electrical

outlet not

controlled

by a wall

switch

Power adapter

Charger

Getting started

Adding your new handset

Before using a newly purchased handset (EP562), it must be

registered with the telephone base. If you already have 12

handsets registered to the telephone base and you wish to

replace your newly purchased handset with another, see page 5.

12:00AM

Place in

Charger

12:00AM

Press MENU in the

base. Find 'Register

Handset' in the main

menu. Press SELECT.

12:00AM

Registration

in progress...

Before registering an additional handset

(EP562), make sure that the handset

battery is installed and charged.

To register a new handset:

1. Place the unregistered handset in the

telephone base or charger.

2. Press the MENU softkey on the

telephone base while in idle mode.

3. Press the UP and DOWN Navkeys tototo

highlight Register Handset, then press

the SELECT softkey.

•

Registering Handset will appear

on the telephone base display.

•

Registration in progress... will

appear on the handset display.

•

The registration process may take

up to 90 seconds to complete.

When the registration is complete, the

newly registered handset will be assigned

the next available handset registration

number. For instance, if you already have

HANDSET 1 and HANDSET 2, the next

registered handset will be HANDSET 3.

If you experience difficulty registering

a handset, see the Troubleshooting

section on page 9.

Getting started

Replacing a handset

When you are replacing rather than

adding a handset, for your handsets to

be numbered sequentially, you need to

delete all the handset registrations on

the telephone base.

To delete all the handset registrations:

1. Press the MENU softkey on the

telephone base in idle mode to enter

to the main menu.

2. Press the UP and DOWN NavKeys to

select Settings, then press SELECT

softkey to enter the Settings menu.

3. Press the UP and DOWN NavKeys

to highlight Delete Handsets, then

press the SELECT softkey. The screen

will show Delete Registration of all

handsets?

4. Press the YES softkey.

After deleting the registrations of all

handsets, you will need to individually

base (see page 4 for registration

instructions).

Settings

Clear Voice Mail

Default Settings

Delete Handsets

Select

Delete Handsets

Delete Registration

of all handsets?

YES No

NOTE: After deletingAfter deleting

the handset registrations,

each handset will reset and

Place in Charger will appear

on the handset display.

NOTE: If you replace

a registered handset,

the new handset will

be assigned the next

available registration

number, rather than the

handset number of the

handset you will replace.

Getting started

Quick reference guide

Status light

Flashes rapidly during an

incoming call, and when

there is a new voice mail

message or new message

in the answering system.

Softkeys (2)

Press to select a menu

item displayed just above

the key.

HOME/FLASH

Press to make or answer a

HOME call.

Flashes rapidly when thererapidly when there

is an incoming HOME call.

and when a HOME call is

on hold.

SPEAKER

Press to activate the

handset speakerphone.

The speakerphone is on

When the SPEAKER key

is lit.

VOLUME

Press to increase or

decrease handset listening

volume while on a call.

OFF/CANCEL

During a HOME or

CELLULAR line call, press

to end the call.

While in a menu, press to

cancel an operation, back

up to the previous menu,

or exit the menu display.

MENU/SELECT

Press to enter the main

menu (page 7). Press to

select, save, or set a desired

setting.

CELLULAR

Press to make or answer a

CELLULAR call.

Flashes when there is an

incoming CELLULAR call or

when a CELLULAR call is

on hold.

Quick launch keys

When in idle mode, press

one of the NavKeys

to launch a handset feature:

• Settings (UP)

• Directory (DOWN)

• Intercom (LEFT)

• Messages (RIGHT)

Handset

12:00AM

REDIAL CALLER ID

HANDSET 1

Settings

(UP)

Manuels Combiné populaires d'autres marques

Swissvoice

Swissvoice ePure HD Manuel utilisateur

Philips

Philips TD6736/BH051P Manuel utilisateur

ASCOM

ASCOM I62 - Manuel utilisateur

LG-Ericsson

LG-Ericsson LIP-9010 Manuel utilisateur

GE 1583 Manuel utilisateur

iiNet

iiNet Handset Manuel utilisateur

ASCOM

ASCOM 9p23 Manuel utilisateur

AirCell

AirCell ST 3100 Manuel utilisateur

Eaton

Eaton HHIR-LCD-PROG Instructions de montage

Mitel

Mitel 112 Manuel utilisateur

SBC

SBC SBC-381H Manuel utilisateur

Mitel

Mitel 5602 Manuel utilisateur

ASCOM

ASCOM d81 Messenger Instructions d'installation

SpectraLink

SpectraLink 7522 Manuel utilisateur

Avaya

Avaya L100 Series Comment utiliser

ooma

ooma HD2 Handset Manuel utilisateur

Yealink

Yealink IPW56 Manuel utilisateur

Sony

Sony SBH52 Manuel utilisateur