AT&T MS2025 Manuel utilisateur
Quick start guide
MS2025 4-line
Small Business Cordless Handset
+06 1((
%#0%'.
+06 1((
%#0%'.
Parts checklist
Your telephone package contains the following items. Save
your sales receipt and original packaging in the event warranty
service is necessary.
Cordless handset
MS2025
User's manual
MS2025
Quick start guide
Charger for cordless
handset with power
adapter installed
Battery for cordless
handset
Battery compartment
cover
+06 1((
%#0%'.
User’s manual
MS2025 4-line
Small Business Cordless Handset
+06 1((
%#0%'.
Quick start guide
MS2025 4-line
Small Business Cordless Handset
This quick start guide provides you with the basic installation
instructions only.
Please refer to the user’s manual provided in the product
package for complete installation and operation instructions, or
you can download the manual from
www.telephones.att.com/manuals.
For customer service or product information, visit our website at
www.telephones.att.com or call 1 (800) 222-3111. In
Canada, dial 1 (866) 288-4268.
1
Your product may be shipped with a protective sticker covering
the handset display - remove it before use.
For customer service or product information, visit our website at
www.telephones.att.com or call 1 (800) 222-3111. In
Canada, dial 1 (866) 288-4268.
Avoid placing the telephone base too close to:
Communication devices such as television sets, VCRs, or other
cordless telephones.
Excessive heat sources.
Noise sources such as a window with traffic outside, motors,
microwave ovens, refrigerators, or fluorescent lighting.
Excessive dust sources such as a workshop or garage.
Excessive moisture.
Extremely low temperature.
Mechanical vibration or shock such as on top of a washing
machine or work bench.
•
•
•
•
•
•
•
You must install and
charge the handset
battery before using the
cordless handset.
See pages 5-7 for easy
instructions.
Installation
2
Charge light
On when the handset is charging in the charger.
Softkeys (2)
Press to select a menu item displayed above
the key.
LINE 1/LINE 2/LINE 3/LINE 4
Press to make a call on the desired line.
Press to answer a call.
INT
Press to make an intercom call when in idle.
REDIAL/PAUSE
Press to view the last 10 numbers dialed.
/SPEAKER
Press to turn on the handset speakerphone.
Press again to resume normal handset use.
•
•
•
•
•
•
•
+06 1((
%#0%'.
Quick reference guide
3
Quick reference guide
VOL/ DIR
Press to scroll up while in menus.
During a call, press to increase the
listening volume.
Press to show directory entries when the telephone
is not in use.
MENU/SELECT
Press to enter the menu.
While in a menu, press to select an item or save an
entry or setting.
OFF/CANCEL
While using menus, press to return to idle mode.
During a call, press to hang up.
VOL/ CID
Press to scroll down while in menus.
During a call, press to decrease the
listening volume.
Press to show the caller ID history when the
telephone is not in use.
MUTE/DELETE
During a call, press to mute the microphone.
While predialing, press to delete digits.
While reviewing the directory entry, press to delete
an individual entry.
While entering or editing a directory entry, press to
erase a digit or character.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
+06 1((
%#0%'.
4
Quick reference guide
Main menu
Main menu
Ringers
Phone Settings
Using menus
Press MENU/SELECT or MENU to
show the first menu item, Ringers.
Press or to scroll through
menu items.
Press MENU/SELECT or SELECT
to select or save changes to a
highlighted menu item.
Press OFF/CANCEL or BACK
to cancel an operation, exit the
menu display or return to the
idle screen.
•
•
•
•
•
•
Belt clip
+06 1((
%#0%'.
Phone
BACK SELECT
Ringers
Phone settings
5
Plug the power adapter into an
electrical outlet not controlled
by a wall switch.
Charger installation
Install the charger as shown below.
IMPORTANT INFORMATION
Use only the power adapter supplied with this product. To order a replacement
power adapter, visit our website at www.telephones.att.com, or call
1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
The power adapter is intended to be correctly oriented in a vertical or floor mount
position. The prongs are not designed to hold the plug in place if it is plugged into
a ceiling, under-the-table or cabinet outlet.
1.
2.
6
Install the battery as shown on the following page. Once you
have installed the battery, the screen indicates the battery
status (see the table below). If necessary, place the handset in
the charger to charge the battery. For best performance, keep
the handset in the charger when not in use. The battery is fully
charged after 11 hours of continuous charging. See the table
on the Technical specification page in the user’s manual for
battery operating times.
If the screen is blank, you need to charge the handset without
interruption for at least 30 minutes to give the handset enough
charge to use the telephone for a short time. When the battery
is low, the handset shows Low battery and a flashing .
Battery indicators Battery status Action
The screen is blank or
shows Place in charger
and flashes.
The battery has no or
very little charge. The
handset cannot be used.
Charge without
interruption (at least
30 minutes).
The screen shows
Low battery and
flashes.
Battery has enough
charge to be used for a
short time.
Charge without
interruption (at least
30 minutes).
The screen shows
EXT XX. (XX represents
the extension number of
its registered device).
Battery is charged. To keep the battery
charged, place the
handset in the charger
when not in use.
Battery installation and charging
7
Battery installation and charging
Plug the battery connector securely into the socket inside the
handset battery compartment. Insert the supplied battery with
the label THIS SIDE UP facing up as indicated.
Align the cover flat against the battery compartment, then
slide it upwards until it clicks into place.
Charge the handset by placing it face forward in the charger.
The charge light is on when charging.
1.
2.
3.
Install the battery as shown below.
+06 1((
%#0%'.
The charge light
IMPORTANT INFORMATION
Use only the supplied rechargeable battery or replacement battery (model
BT164392). To order a replacement battery, visit our website at
www.telephones.att.com, or call 1 (800) 222-3111. In
Canada, dial 1 (866) 288-4268.
If you do not use the handset for a long time, disconnect and remove the
battery to prevent possible leakage.
•
•
1 2
3
8
You must register this MS2025 cordless handset with the
MS2085 console or MS2015 deskset before use. Each MS2085
or MS2015 supports only one cordless handset. When first
purchased, the handset shows Choose Handset in Registration
at base menu. And put handset on cradle to register.
If the handset does not have enough power to proceed with the
registration, you need to charge the new handset for at least five
minutes (see Battery installation and charging on pages 6-7).
Start registration when the handset screen shows Choose
Handset in Registration at base menu. And put handset on
cradle to register.
Adding and registering a handset
Autres manuels pour MS2025
2
Table des matières
Autres manuels AT&T Combiné
AT&T
AT&T SB67108 - AT&T Manuel utilisateur
AT&T
AT&T TL90073 Manuel utilisateur
AT&T
AT&T DLP70090 Manuel utilisateur
AT&T
AT&T DLP70110 Manuel utilisateur
AT&T
AT&T TL77008 Manuel utilisateur
AT&T
AT&T E252 Manuel utilisateur
AT&T
AT&T E5901 Manuel utilisateur
AT&T
AT&T CL80100 Manuel utilisateur
AT&T
AT&T Synapse SB67040 Manuel utilisateur
AT&T
AT&T CL81201 Manuel utilisateur
AT&T
AT&T CL80101 Manuel utilisateur
AT&T
AT&T TL88002BK Manuel utilisateur
AT&T
AT&T CL80121 Manuel utilisateur
AT&T
AT&T 5865 Manuel utilisateur
AT&T
AT&T E5640 Manuel utilisateur
AT&T
AT&T E5902B Manuel utilisateur
AT&T
AT&T BL103-0K Manuel utilisateur
AT&T
AT&T CLP99573 Manuel utilisateur
AT&T
AT&T CL80109 Manuel utilisateur
AT&T
AT&T CL80103 Manuel utilisateur
