Anritsu MP1570A Manuel utilisateur

Document No.: M-W1721AE-11.0

ANRITSU CORPORATION

MP1570A

SONET/SDH/PDH/ATM Analyzer

Operation Manual

Vol.2

Remote Control

11th Edition

•

Read this manual before using the equipment.

•To ensure that the equipment is used safely, read the

"For Safety" in the MP1570A SONET/SDH/PDH/ATM

Analyzer Operation Manual first.

•Keep this manual with the equipment.

Safety Symbols

To prevent the risk of personal injury or loss related to equipment malfunction, Anritsu Corporation uses the following

safety symbols to indicate safety-related information. Insure that you clearly understand the meanings of the symbols

BEFORE using the equipment. Some or all of the following five symbols may not be used on all Anritsu equipment.

In addition, there may be other labels attached to products which are not shown in the diagrams in this manual.

Symbols used in manual

This indicates a very dangerous procedure that could result in serious injury or

death if not performed properly.

This indicates a hazardous procedure that could result in serious injury or death if

not performed properly.

This indicates a hazardous procedure or danger that could result in light-to-severe

injury, or loss related to equipment malfunction, if proper precautions are not taken.

Safety Symbols Used on Equipment and in Manual

The following safety symbols are used inside or on the equipment near operation locations to provide information

about safety items and operation precautions. Insure that you clearly understand the meanings of the symbols

and take the necessary precautions BEFORE using the equipment.

This indicates a prohibited operation. The prohibited operation is indicated sym-

bolically in or near the barred circle.

This indicates an obligatory safety precaution. The obligatory operation is indicat-

ed symbolically in or near the circle.

This indicates warning or caution. The contents are indicated symbolically in or

near the triangle.

This indicates a note. The contents are described in the box.

These indicate that the marked part should be recycled.

MP1570A

SONET/SDH/PDH/ATM Analyzer

Operation Manual Vol.2 Remote Control

23 February 2000 (First Edition)

27 September 2005 (11th Edition)

publisher.

The contents of this manual may be changed without prior notice.

Printed in Japan

DANGER

WARNING

CAUTION

iii

Equipment Certificate

Anritsu Corporation certifies that this equipment was tested before ship-

ment using calibrated measuring instruments with direct traceability to

public testing organizations recognized by national research laboratories

including the National Institute of Advanced Industrial Science and Tech-

nology, and the National Institute of Information and Communications

Technology, and was found to meet the published specifications.

Anritsu Warranty

Anritsu Corporation will repair this equipment free-of-charge if a mal-

function occurs within 1 year after shipment due to a manufacturing fault,

provided that this warranty is rendered void under any or all of the fol-

lowing conditions.

•The fault is outside the scope of the warranty conditions described in

the operation manual.

•The fault is due to mishandling, misuse, or unauthorized modification

or repair of the equipment by the customer.

•The fault is due to severe usage clearly exceeding normal usage.

•The fault is due to improper or insufficient maintenance by the cus-

tomer.

•The fault is due to natural disaster including fire, flooding, earthquake,

etc.

•The fault is due to use of non-specified peripheral equipment,

peripheral parts, consumables, etc.

•The fault is due to use of a non-specified power supply or in a non-

specified installation location.

In addition, this warranty is valid only for the original equipment pur-

chaser. It is not transferable if the equipment is resold.

Anritsu Corporation will not accept liability for equipment faults due to

unforeseen and unusual circumstances, nor for faults due to mishandling

by the customer.

Anritsu Corporation Contact

In the event that this equipment malfunctions, contact an Anritsu Service

and Sales office. Contact information can be found on the last page of the

printed version of this manual, and is available in a separate file on the

CD version.

Notes On Export Management

This product and its manuals may require an Export License/Approval by

the Government of the product's country of origin for re-export from you

country.

Before re-exporting the product or manuals, please contact us to confirm

whether they are export-controlled items or not.

When you dispose of export-controlled items, the products/manuals are

needed to be broken/shredded so as not to be unlawfully used for military

purpose.

Crossed-out Wheeled Bin Symbol

Equipment marked with the Crossed-out Wheeled Bin Symbol complies

with council directive 2002/96/EC (the “WEEE Directive”) in European

Union.

For Products placed on the EU market after August 13, 2005, please con-

tact your local Anritsu representative at the end of the product's useful life

to arrange disposal in accordance with your initial contract and the local

law.

CE Conformity marking

Anritsu affixes the CE Conformity marking on the following product (s) in

accordance with the Council Directive 93/68/EEC to indicate that they

conform with the EMC and LVD directive of the European Union (EU).

CE marking

1. Product Model

Model: MP1570A SONET/SDH/PDH/ATM ANALYZER

and

Plug-in Units: See Table 1.

2. Applied Directive

EMC: Council Directive 89/336/EEC

LVD: Council Directive 73/23/EEC

3. Applied Standards

•EMC:Emission: EN61326: 1997 / A2: 2001 (Class A)

Immunity:EN61326: 1997 / A2: 2001 (Annex A)

Performance Criteria*

IEC 61000-4-2 (ESD) B

IEC 61000-4-3 (EMF) A

IEC 61000-4-4 (Burst) B

IEC 61000-4-5 (Surge) B

IEC 61000-4-6 (CRF) A

IEC 61000-4-8 (RPFMF) A

IEC 61000-4-11 (V dip/short) B

*: Performance Criteria

A: During testing normal performance within the specifi-

cation limits

B: During testing, temporary degradation, or loss of

function or performance which is self-recovering

Harmonic current emissions:

EN61000-3-2: 2000 (Class A equipment)

•LVD: EN61010-1: 2001 (Pollution Degree 2)

vii

C-tick Conformity marking

Anritsu affixes the C-tick marking on the following product (s) in accor-

dance with the regulation to indicate that they conform with the EMC

framework of Australia/New Zealand.

C-tick marking

1. Product Model

Model: MP1570A SONET/SDH/PDH/ATM ANALYZER

and

Plug-in Units: See Table 1.

2. Applied Standards

EMC: Emission:

AS/NZS 2064.1 / 2 (ISM, Group 1, Class A equipment)

viii

Table 1 List of the Product Name and Model Name

Model Name Product Name

Main Frame

MP1570A SONET/SDH/PDH/ATM ANALYZER

Plug in Units

MP0105A CMI UNIT

MP0108A NRZ UNIT

MP0111A Optical 156M/622M (1.31) UNIT

MP0112A Optical 156M/622M (1.55) UNIT

MP0113A Optical 156M/622M (1.31/1.55) UNIT

MP0121A 2/8/34/139/156M UNIT

MP0122A 1.5/45/52M UNIT

MP0122B 1.5/45/52/52M (1.31) UNIT

MP0123A ATM UNIT

MP0124A 2/8/34/139M 156/622M Jitter UNIT

MP0125A 1.5/45/52M 156/622M Jitter UNIT

MP0126A 2/8/34/139M 1.5/45/52M 156/622M Jitter UNIT

MP0127A 2.5G (1.31) UNIT

MP0128A 2.5G (1.55) UNIT

MP0129A 2.5G (1.31/1.55) UNIT

MP0130A 2.5G Jitter UNIT

MP0131A Add/Drop UNIT

MU150000A 2.5G/10G UNIT

MU150001A Optical 10G Tx (1.55) UNIT

MU150001B Optical 10G Tx (1.55) UNIT

MU150002A Optical 10G Rx (narrow) UNIT

MU150005A 2/8/34/139M 156/622M Jitter UNIT

MU150006A 1.5/45/52M 156/622M Jitter UNIT

MU150007A 2/8/34/139M 1.5/45/52M 156/622M Jitter UNIT

MU150008A 2.5G (1.31) UNIT

MU150009A 2.5G (1.55) UNIT

MU150010A 2.5G (1.31/1.55) UNIT

MU150011A 2.5G Jitter UNIT

MU150017A Optical 10G Rx (Wide) Unit

MU150017B Optical 2.5G/10G Rx (Wide) Unit

MU150031A Optical 10G (1.55) High Power Tx Unit

MU150031C Optical 2.5G (1.55)/10G (1.55) High Power Tx Unit

MU150061A Optical 10G (1.31) Tx Unit

MU150061B Optical 2.5G (1.31)/10G (1.31) Tx Unit

MU154882A GPIB/ETHERNET INTERFACE

About MP1570A Operation Manuals

Basic Operation SDH Edition

Basic O

eration SONET Edition

(

this manual

)

Remote Control

(

this manual

)

Describes the remote control and program examples

using the GPIB and RS-232C interfaces. (MP1570A is

compatible with SPCI).

TM Measurment

Describes the contents of screens, operation procedures