Anritsu MS2690A Manuel utilisateur

Document No.: M-W2854AE-40.0

ANRITSU CORPORATION

•For safety and warning information, please read this

manual before attempting to use the equipment.

•

Additional safety and warning information is provided

within the MS2690A/MS2691A/MS2692A Signal

Analyzer Operation Manual (Mainframe Operation).

Please also refer to this document before using the

equipment.

•

Keep this manual with the equipment.

MS2690A/MS2691A/MS2692A

Signal Analyzer

Operation Manual

Spectrum Analyzer Function

Operation

40th Edition

Safety Symbols

To prevent the risk of personal injury or loss related to equipment malfunction, Anritsu Corporation uses the

following safety symbols to indicate safety-related information. Ensure that you clearly understand the meanings of

the symbols BEFORE using the equipment. Some or all of the following symbols may be used on all Anritsu

equipment. In addition, there may be other labels attached to products that are not shown in the diagrams in this

manual.

Symbols used in manual

This indicates a very dangerous procedure that could result in serious injury or

death if not performed properly.

This indicates a hazardous procedure that could result in serious injury or death if

not performed properly.

This indicates a hazardous procedure or danger that could result in light-to-severe

injury, or loss related to equipment malfunction, if proper precautions are not taken.

Safety Symbols Used on Equipment and in Manual

The following safety symbols are used inside or on the equipment near operation locations to provide information

about safety items and operation precautions. Ensure that you clearly understand the meanings of the symbols and

take the necessary precautions BEFORE using the equipment.

This indicates a prohibited operation. The prohibited operation is indicated

symbolically in or near the barred circle.

This indicates an obligatory safety precaution. The obligatory operation is

indicated symbolically in or near the circle.

This indicates a warning or caution. The contents are indicated symbolically in or

near the triangle.

This indicates a note. The contents are described in the box.

These indicate that the marked part should be recycled.

MS2690A/MS2691A/MS2692A

Signal Analyzer

Operation Manual Spectrum Analyzer Function Operation

24 April 2007 (First Edition)

23 June 2016 (40th Edition)

publisher.

The contents of this manual may be changed without prior notice.

Printed in Japan

DANGER

WARNING

CAUTION

iii

Notes On Export Management

This product and its manuals may require an Export License/Approval by

the Government of the product's country of

origin for re-

export from your

country.

Before re

exporting the product or manuals, please contact us to confirm

whet

her they are export-controlled items or not.

When you dispose of export

controlled items, the products/manuals need to

be broken/shredded so as not to be unlawfully used for military purpose.

Cautions against computer virus infection

•Copying files and data

Only files that have been provided directly from Anritsu or generated

using Anritsu equipment should be copied to the instrument.

All other required files should be transferred by means of USB or

CompactFlash media after undergoing a thorough virus check.

•Adding software

Do not download or install software that has not been specifically

recommended or licensed by Anritsu.

•Network connections

Ensure that the network has sufficient anti-

virus security protection in

place.

About This Manual

Operation manual configuration

The operation manual configuration of the MS2690A/MS2691A/MS2692A

Signal Analyzer is shown below.

MS2690A/MS2691A/MS2692A Signal Analyzer Operation Manual

(

Main Frame O

eration

)

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A

Signal Analyzer Operation Manual (Phase Noise Measurement Function Operation)

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A

Signal Analyzer Operation Manual (Phase Noise Measurement Function Remote Control)

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A

Signal Analyzer Operation Manual (Main Frame Remote Control)

MS2840A Signal Analyzer Operation Manual

(Main Frame Operation)

Or MS2830A Signal Analyzer Operation Manual

(

Main Frame O

eration

)

MS2690A/MS2691A/MS2692A

Signal Analyzer Operation Manual

(Signal Analyzer Function

Operation)

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A

Signal Analyzer Operation Manual (Signal Analyzer Function Remote Control)

MS2830A/MS2840A

Signal Analyzer Operation Manual

(Signal Analyzer Function

Operation)

MS2690A/MS2691A/MS2692A

Spectrum Analyzer Operation Manual

(Spectrum Analyzer Function

Operation)

MS2690A/MS2691A/MS2692A and MS2830A/MS2840A

Signal Analyzer Operation Manual (Spectrum Analyzer Function Remote Control)

MS2830A/MS2840A

Spectrum Analyzer Operation Manual

(Spectrum Analyzer Function

Operation)

•Signal Analyzer Operation Manual (Mainframe)

•Signal Analyzer Operation Manual (Mainframe Remote Control)

Description of basic operations, maintenance procedures, common

functions and common remote functions of the mainframe

•Signal Analyzer Operation Manual (Signal Analyzer Function)

•Signal Analyzer Operation Manual (Signal Analyzer Function Remote

Control)

Description of basic operations, functions and remote functions of the

signal analyzer

•Signal Analyzer Operation Manual (Spectrum Analyzer Function) <This

document>

•Signal Analyzer Operation Manual (Spectrum Analyzer Function Remote

Control)

Description of basic operations, functions and remote functions of the

spectrum analyzer

•Signal Analyzer Operation Manual (Phase Noise Measurement Function

Operation)

•Signal Analyzer Operation Manual (Phase Noise Measurement Function

Remote Control)

Description of basic operations, functions and remote functions of the

phase noise measurement function.

In this document, indicates a panel key.

III

•Signal Analyzer Operation Manual (Spectrum Analyzer Function Remote

Control)

Description of basic operations, functions and remote functions of the

spectrum analyzer

•Signal Analyzer Operation Manual (Phase Noise Measurement Function

Operation)

•Signal Analyzer Operation Manual (Phase Noise Measurement Function

Remote Control)

Description of basic operations, functions and remote functions of the

phase noise measurement function.

In this document, indicates a panel key.

Table of Contents

About This Manual....................................... I

Chapter 1 Overview ................................... 1-1

1.1 Overview of Spectrum Analyzer ................................ 1-2

1.2 Features of Spectrum Analyzer ................................. 1-3

Chapter 2 Basic Operation........................ 2-1

2.1 Display Description .................................................... 2-2

2.2 Single/Continuous Sweep.......................................... 2-4

2.3 Setting Frequency...................................................... 2-5

2.4 Setting Level .............................................................. 2-14

2.5 Setting RBW/VBW ..................................................... 2-29

Chapter 3 Display Mode Selection ........... 3-1

3.1 Setting Storage Mode ................................................ 3-2

3.2 Setting Limit Line ....................................................... 3-10

3.2 Setting Time/Sweep................................................... 3-29

3.4 Save on Event............................................................ 3-33

Chapter 4 Marker Function ....................... 4-1

4.1 Setting Marker............................................................ 4-2

4.2 Setting Peak Search Function ................................... 4-13

4.3 Displaying Marker List ............................................... 4-23

Chapter 5 Trigger Function and

Gate Function ........................... 5-1

5.1 Setting Trigger Function ............................................ 5-2

5.2 Setting Gate Function ................................................ 5-7

Chapter 6 Preselector Tuning Function... 6-1

6.1 Preselector Tuning Function...................................... 6-2

Appendix Index

Chapter 7 Measure Function .................... 7-1

7.1 Selecting Measure Function ...................................... 7-2

7.2 Adjacent Channel Leakage Power Measurement

(ACP) ......................................................................... 7-4

7.3 Burst Average Power Measurement.......................... 7-12

7.4 Channel Power Measurement (Channel Power) ....... 7-15

7.5 Occupied Bandwidth Measurement

(Occupied Bandwidth) ............................................... 7-17

7.6 Spectrum Emission Mask Measurement

(Spectrum Emission Mask)........................................ 7-20

7.7 Spurious Emission Measurement.............................. 7-31

7.8 Two-tone Third Order Intermodulation Distortion ...... 7-48

Chapter 8 Other Functions ....................... 8-1

8.1 Selecting Other Function ........................................... 8-2

8.2 Setting Title ................................................................ 8-3

8.3 Deleting Warmup Message ....................................... 8-4

8.4 Setting Uncal Message.............................................. 8-5

8.5 Adjusting Internal Reference Frequency Signal ........ 8-5

8.6 Input Source for Reference Frequency Signal .......... 8-7

Appendix A Error Messages ...................... A-1

Appendix B Default Value List................... B-1

Appendix C Standard Parameter List........ C-1

Index .......................................................... Index-1

VI.

Autres manuels pour MS2690A

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Anritsu Instrument de mesure

Anritsu

Anritsu Site Master S331L Manuel utilisateur

Anritsu

Anritsu BTS Master MT8221B Manuel utilisateur

Anritsu

Anritsu Network Master MU909020A Manuel utilisateur

Anritsu

Anritsu MP1800A Manuel utilisateur

Anritsu

Anritsu MS9710C Manuel utilisateur

Anritsu

Anritsu ML2437A Manuel du propriétaire

Anritsu

Anritsu Field Master MS2080A Manuel utilisateur

Anritsu

Anritsu MX269018A Manuel utilisateur

Anritsu

Anritsu Spectrum Master MT8212A Manuel utilisateur

Anritsu

Anritsu VNA Master MS202 B Series Manuel utilisateur

Anritsu

Anritsu Field Master Pro MS2090A Manuel utilisateur

Anritsu

Anritsu ShockLine MS46131A-010 Manuel utilisateur

Anritsu

Anritsu VNA Master MS2026C Manuel utilisateur

Anritsu

Anritsu PIM Master MW8219A Manuel utilisateur

Anritsu

Anritsu MS2722C Manuel utilisateur

Anritsu

Anritsu MS2690A Manuel utilisateur

Anritsu

Anritsu 56100A Manuel du propriétaire

Anritsu

Anritsu MP1220A Manuel utilisateur

Anritsu

Anritsu Microwave Site Master S820E Manuel utilisateur

Anritsu

Anritsu Field Master Manuel utilisateur

Anritsu

Anritsu CMA50 Manuel utilisateur

Anritsu

Anritsu MS2690A Manuel d'installation

Anritsu

Anritsu MX269017A Manuel utilisateur

Anritsu

Anritsu IQ Fiber Master MT2780A Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur