Amprobe TMD-10 Manuel utilisateur

TMD-10

Dual Temperature

Meter

Users Manual

For detailed specifications and ordering info go to www.TestEquipmentDepot.com

English

TMD-10

Dual Temperature Meter

Users Manual

TMD10_Rev001

Limited Warranty and Limitation of Liability

Your Amprobe product will be free from defects in material and workmanship for 1

year from the date of purchase. This warranty does not cover fuses, disposable batteries

or damage from accident, neglect, misuse, alteration, contamination, or abnormal

conditions of operation or handling. Amprobe’s warranty obligation is limited, at

Amprobe’s option, to refund of the purchase price, free of charge repair, or replacement

of a defective product . Resellers are not authorized to extend any other warranty on

Amprobe’s behalf. To obtain service during the warranty period, return the product with

proof of purchase to an authorized Amprobe Test Tools Service Center or to an Amprobe

dealer or distributor. See Repair Section for details. This warranty is your only remedy . All

other warranties - whether express, implied or statutory - including implied warranties of

ﬁtness for a particular purpose or merchantability, are hereby excluded. Neither Amprobe

nor its parent company or afﬁliates shall be liable for any special, indirect, incidental or

consequential damages or losses, arising from any cause or theory. Since some states or

countries do not allow the exclusion or limitation of an implied warranty or of incidental

or consequential damages, this limitation of liability may not apply to you.

Repair

All test tools returned for warranty or non-warranty repair or for calibration should be

accompanied by the following: your name, company’s name, address, telephone number,

and proof of purchase. Additionally, please include a brief description of the problem or

the service requested and include the test leads with the meter. Non-warranty repair or

replacement charges should be remitted in the form of a check, a money order, credit card

with expiration date, or a purchase order made payable to Amprobe® Test Tools.

In-Warranty Repairs and Replacement – All Countries

Please read the warranty statement and check your battery before requesting repair.

During the warranty period any defective test tool can be returned to your Amprobe®

Test Tools distributor for an exchange for the same or like product.

Non-Warranty Repairs and Replacement – US and Canada

Non-warranty repairs in the United States and Canada should be sent to a Amprobe® Test

Tools Service Center. Call Amprobe® Test Tools or inquire at your point of purchase for

current repair and replacement rates.

➊T1 and T2 thermocouple inputs

➋LCD

➌°C / °F temperature scales

➍Data HOLD

APO, turns off Auto Power Off

➎Power ON /OFF

➏T1, T2, T1-T2

➐RELative function

OFS, Offset Thermocouple

function

➑K / J thermocouple types

➒MAX MIN

SET command to save Thermal

Offset adjustment

K/J

REL

ºC / ºF

HOLD

T1 T2

T1-T2

MAX

MIN

T2 WT1

24VC

- + MAX - +

T1 REL HOLD F C

NMAX MIN T1- T2

TMD-10

▲

▼

APO

OFS

SET

TMD-10

Dual Temperature Meter

CONTENTS

Symbols.................................................................................................................5

Unpacking and Inspection...................................................................................5

Introduction..........................................................................................................5

Operation ............................................................................................................5

°C / °F ...............................................................................................................6

MAX, MIN and AVG........................................................................................ 6

K / J .................................................................................................................. 6

HOLD ..............................................................................................................6

REL ................................................................................................................... 6

T1 T2 / T1-T2....................................................................................................7

Auto Power Off (APO).................................................................................... 7

Thermocouple Error Correction (OFS, Offset)............................................... 7

Speciﬁcations........................................................................................................ 8

Maintenance and Repair ....................................................................................9

Battery Replacement ...........................................................................................9

SYMBOLS

Refer to the manual Complies with EU

directives

Conforms to relevant

Australian standards. Do not dispose of this

product as unsorted

municipal waste.

Warning and Precautions

The bead thermocouples supplied with the meter are not intended for•

contact with liquids or electrical circuits.

Do not mix thermocouple types.•

Match the polarity of the adapter to the polarity of the thermocouple•

inputs.

UNPACKING AND INSPECTION

Your shipping carton should include:

1 TMD-10 temperature meter

2 K-type thermocouples

1 9 volt battery

1 Manual

If any of the items are damaged or missing, return the complete package to

the place of purchase for an exchange.

INTRODUCTION

The TMD-10 is a dual input temperature measurement meter using Type K or

Type J thermocouples.

OPERATION

Press the1. button to turn power on or off

Set the Function Switch to °C or °F.2.

Select thermocouple type (K / J) and connect the thermocouple(s) to the3.

T1 or T2 input.

Do not mix thermocouple types.

Match the polarity of the adapter to the polarity of the thermocouple

input.

Expose the thermocouple(s) to the temperature(s) to be measured.4.

Read the LCD display.5.

°C / °F

Press the key to change from Celsius (°C) to Fahrenheit (°F) temperature

scale.

This setting can not be changed when in the HOLD mode. The TMD-10 will

auto save the temperature scale setting during shutdown.

MAX, MIN and AVG

Press the button to start the recording of the maximum, minimum,

and average of all readings after the function is enabled. Pressing the

button steps the top reading through the MAX, MIN, and AVG values. Press

the button for > 1 second to disable the function.

The MAX, MIN or AVG reading is shown on the top display and the actual

reading is shown on the bottom display for T1.

To use MAX, MIN, and AVG for T2, disable MAX, MIN, and AVG and press and

hold key > 1 sec to swap T2 to the top display and T1 to bottom display.

Press button again to activate the function.

If the TMD-10 turns off because of Auto Power Off, the recorded values will

be saved for use when the meter is re-energized.

K / J

Press key to switch T1 from type K to type J thermocouple for the top

display.

Press and hold key > 1 sec to swap T2 to the top display and T1 to

bottom display.

Press key to switch T2 from type K to type J.

Press and hold key > 1 sec to swap T1 to the top display and T2 to

bottom display.

This setting cannot be changed if in HOLD, MAX/MIN, T1-T2 or REL

modes.

The TMD-10 will auto save the thermocouple type setting during shutdown.

HOLD

Press the key to freeze the LCD displays. Press the HOLD key again to

return to normal operation. When the function is enabled, all function

keys are disabled except for power key.

REL

Relative mode allows the user to offset the subsequent meter measurements

with the top display reading as the reference value.

Press the button to enable the Relative function for the T1 thermo-

couple. The top display will reset to 0.0 (reference value) and subsequently

readings display the difference between the reference value and the actual

reading. The actual reading is shown on the bottom display. Press the

button to disable the Relative function.

To use the Relative mode for T2, disable and press and hold key

> 1 second to swap T2 to the top display and T1 to bottom display.

T1 T2 / T1-T2

T1 T2 displays the 2 inputs independently. Press and hold button > 1

second to swap display location of the display location of T1 and T2.

(T1-T2)

Press button to display T1 minus T2 temperature value. The top display

shows the T1-T2 temperature. The lower display shows the top display

selected in the T1 T2 mode. Press button again to disable this function

Auto Power Off (APO)

The TMD-10 powers down automatically after approximately 15 minutes of

inactivity to save battery life. Press the button to turn the TMD-10 ON. You

can disable Auto Power Off by pressing the button > 1 second after the

TMD-10 is ON.

The power cannot be turned OFF in the OFFSET SETUP mode.

Thermocouple Error Correction (OFS, Offset)

User can add an offset to compensate for the error of speciﬁc thermocouple

probes.

Press and hold the1. (OFS) button > 1 second to enter the Offset Setup

mode.

Immerse the thermocouple(s) in thermos bath with crushed ice and fresh2.

water (0.0 °C / 32.0 °F).

Press the3. button to increase or power button to decrease the

Offset value. The allowable adjustment range is ± 5 °C / ± 9 °F in 0.1°C/°F

increments.

Press4. (SET) button to save and leave setup mode. The “Offset” icon

will remain on the LCD.

Press and hold5. button > 1 second to swap T2 to the top display and

T1 to bottom display. Press button to switch T2 from type K to type J.

Repeat steps 1, 2, 3 and 4 for T2.6.

To remove the Offset, Repeat steps 1, 2, 3 and 4 setting the offset (lower7.

display) to 0.0. When both thermocouple offset are zeroed out, the

“Offset” icon will be turned off.

SPECIFICATIONS

General

Display: Dual 5-digit LCD displays

Overrange indication:

“OL” stands for positive temperature

“-OL” stands for negative temperature.

Low battery: the “"sign will appear while battery is low.

Power Supply: 9V NEDA 1604, IEC 6F22, JIS 006P battery.

Battery life: approx. 200 hours.

Auto power off: approx. 15 minutes.

Environment: Indoor operation, - Altitude: Up to 2000 m.

Temperature / Humidity:

Operating: 0°C to 50°C (32°F to 122°F); < 80% RH

Storage: 0°C to 50°C (32°F to 122°F); < 80% RH

Dimensions: 130 x 56 x 38 mm (5.1 x 2.2 x 1.5 in.)

Weight: 170g( 0.37 lb.) battery included

-EMC: EN61326-1 This product complies with requirements of the

following European Community Directives: 89/336/EEC (Electromagnetic

Compatibility) and 73/23/EEC (Low Voltage) as amended by 93/68/EEC (CE

Marking). However, electrical noise or intense electromagnetic ﬁelds in the

vicinity of the equipment may disturb the measurement circuit. Measuring

instruments will also respond to unwanted signals that may be present within

the measurement circuit. Users should exercise care and take appropriate

precautions to avoid misleading results when making measurements in the

presence of electronic interference.

Electrical (23 °C ± 5°C, < 80 % RH)

Temperature scale: °C or ° F

Thermocouple type:

K-type: -200°C to 1370 °C (-328 °F to 2498 °F)

J-type: -200°C to 1050 °C (-328°F to 1922 °F)

Resolution: 0.1

Accuracy: ± (0.05 % rdg + 0.7 °C), ± (0.05 % rdg + 1.4 °F)

Input protection: 24V DC or AC.

OPEN

Battery Replacement

Temperature Coefﬁcient:

± (0.01 % rdg + 0.03 °C per °C); ± (0.01% rdg + 0.06 °F per °F) outside the

speciﬁed + 18 °C to + 28 °C (+ 64°F to + 82°F) range.

Calibration: Yearly

MAINTENANCE AND REPAIR

If there appears to be a malfunction during the operation of the meter, the

following steps should be performed in order to isolate the cause of the

problem.

1. Check the battery. Replace the battery immediately when the symbol “”

appears on the LCD.

2. Review the operating instructions for possible mistakes in operating

procedure.

Except for the replacement of the battery, repair of the meter should be

performed only by a Factory Authorized Service Center or by other qualiﬁed

instrument service personnel. The front panel and case can be cleaned with

a mild solution of detergent and water. Apply sparingly with a soft cloth and

allow to dry completely before using. Do not use aromatic hydrocarbons or

chlorinated solvents for cleaning.

BATTERY REPLACEMENT

1. Turn off the meter and slide out the battery cover. Replace the battery with

a NEDA type 1604 or equivalent 9V alkaline battery. Replace the cover.

2. Remove battery when the TMD-10 is not used for extended period.

Autres manuels pour TMD-10

Table des matières

Autres manuels Amprobe Instrument de mesure

Amprobe

Amprobe BT-AFT1 Manuel utilisateur

Amprobe

Amprobe ACD-30P Manuel utilisateur

Amprobe

Amprobe PQ55A Manuel utilisateur

Amprobe

Amprobe VPC-10 Manuel utilisateur

Amprobe

Amprobe LM-200LED Manuel utilisateur

Amprobe

Amprobe TMA5 Manuel utilisateur

Amprobe

Amprobe MO-100 Manuel utilisateur

Amprobe

Amprobe THWD-10 Manuel utilisateur

Amprobe

Amprobe TACH-10 Manuel utilisateur

Amprobe

Amprobe FS-3 Manuel utilisateur

Amprobe

Amprobe AC50A Manuel utilisateur

Amprobe

Amprobe VPC-10A Manuel utilisateur

Amprobe

Amprobe LH41 Manuel utilisateur

Amprobe

Amprobe VP-440 Manuel utilisateur

Amprobe

Amprobe TDR-400 Manuel utilisateur

Amprobe

Amprobe LM-200LED Manuel utilisateur

Amprobe

Amprobe LT-10 Manuel utilisateur

Amprobe

Amprobe VPC-20 Manuel utilisateur

Amprobe

Amprobe CR50A Manuel utilisateur

Amprobe

Amprobe 3434877 Manuel utilisateur

Amprobe

Amprobe ACDC-100 TRMS Manuel utilisateur

Amprobe

Amprobe ALC-110 Manuel utilisateur

Amprobe

Amprobe ACD-21SW Manuel utilisateur

Amprobe

Amprobe WT-70 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur