Amprobe TIC 300 PRO Manuel utilisateur
Users Manual
• Mode d’emploi
• Bedienungshandbuch
• Manual d’uso
• Manual de uso
TIC 300 PRO
High Energy Tic Tracer –
Non Contact
AC Voltage Detector
TIC 300 PRO
High Energy Tic Tracer –
Non Contact
AC Voltage Detector
Users Manual
July 2011, Rev003
©2011 Amprobe Test Tools.
All rights reserved. Printed in China
English
Limited Warranty and Limitation of Liability
Your Amprobe product will be free from defects in material
and workmanship for 1 year from the date of purchase. This
warranty does not cover fuses, disposable batteries or damage
from accident, neglect, misuse, alteration, contamination, or
abnormal conditions of operation or handling. Resellers are not
authorized to extend any other warranty on Amprobe’s behalf.
To obtain service during the warranty period, return the product
with proof of purchase to an authorized Amprobe Test Tools
Service Center or to an Amprobe dealer or distributor. See Repair
Section for details. THIS WARRANTY IS YOUR ONLY REMEDY.
ALL OTHER WARRANTIES - WHETHER EXPRESS, IMPLIED OR
STAUTORY - INCLUDING IMPLIED WARRANTIES OF FITNESS FOR
A PARTICULAR PURPOSE OR MERCHANTABILITY, ARE HEREBY
DISCLAIMED. MANUFACTURER SHALL NOT BE LIABLE FOR ANY
SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES
OR LOSSES, ARISING FROM ANY CAUSE OR THEORY. Since some
states or countries do not allow the exclusion or limitation of an
implied warranty or of incidental or consequential damages, this
limitation of liability may not apply to you.
Repair
All test tools returned for warranty or non-warranty repair or
for calibration should be accompanied by the following: your
name, company’s name, address, telephone number, and proof of
purchase. Additionally, please include a brief description of the
problem or the service requested and include the test leads with
the meter. Non-warranty repair or replacement charges should be
remitted in the form of a check, a money order, credit card with
expiration date, or a purchase order made payable to Amprobe®
Test Tools.
In-Warranty Repairs and Replacement – All Countries
Please read the warranty statement and check your battery before
requesting repair. During the warranty period any defective test
tool can be returned to your Amprobe® Test Tools distributor
for an exchange for the same or like product. Please check the
“Where to Buy” section on www.amprobe.com for a list of
distributors near you. Additionally, in the United States and
Canada In-Warranty repair and replacement units can also be sent
to a Amprobe® Test Tools Service Center (see address below).
Non-Warranty Repairs and Replacement – US and Canada
Non-warranty repairs in the United States and Canada should be
sent to a Amprobe® Test Tools Service Center. Call Amprobe® Test
Tools or inquire at your point of purchase for current repair and
replacement rates.
In USA In Canada
Amprobe Test Tools Amprobe Test Tools
Everett, WA 98203 Mississauga, ON L4Z 1X9
Tel: 877-AMPROBE (267-7623) Tel: 905-890-7600
Non-Warranty Repairs and Replacement – Europe
European non-warranty units can be replaced by your Amprobe®
Test Tools distributor for a nominalv charge. Please check the
“Where to Buy” section on www.amprobe.com for a list of
distributors near you.
European Correspondence Address*
Amprobe® Test Tools Europe
In den Engematten 14
79286 Glottertal, Germany
Tel.: +49 (0) 7684 8009 - 0
*(Correspondence only – no repair or replacement available from
this address. European customers please contact your distributor.)
1
1) Voltage sensor
2) ON/OFF Button
3) Circuit TEST button
4) HIGH range switch
5) HIGH range LED
6) LOW range switch
7) LOW range LED
8) Battery compartment
9) HOT STICK attachment point
10) Detection Blue LEDs indicator
TIC 300 PRO
1
CONTENTS
SYMBOLS..........................................................................2
UNPACKING AND INSPECTION .......................................3
INTRODUCTION ................................................................4
Features ........................................................................4
OPERATION.......................................................................5
ON / OFF Button ........................................................... 5
TEST Button..................................................................5
Voltage Detection ........................................................ 6
LOW Range................................................................... 6
HIGH Range .................................................................. 6
Locate breaks in insulated wire & heating elements ..7
Check Outlets and Switches ........................................7
MAINTENANCE AND REPAIR ..........................................8
Battery Replacement ...................................................8
SPECIFICATION ................................................................. 9
LOW Voltage ................................................................10
HIGH Voltage................................................................ 10
2
3
SYMBOLS
Refer to the manual
Caution Dangerous Voltage
Double insulated
Complies with EU directives
Conforms to relevant Australian standards.
Do not dispose of this product as unsorted
municipal waste.
For Use By Trained Personnel Only
Anyone using this instrument should be knowledgeable
and trained about the risks involved with measuring
medium and high voltage, especially in an industrial
setting, and the importance of taking safety precautions
and of testing the instrument before and after using it
to ensure that it is in good working condition.
WARNING and PRECAUTIONS
• Use extreme caution when testing live electrical
circuits due to risk of injury from electrical shock.
• Do not exceed the maximum overload limits
(see specifications) nor the limits marked on the
instrument itself. Never test voltage more than
122 kV ac rms.
• When using the HIGH range, the TIC 410A HOT
STICK or equivalent extension pole MUST be used.
• Comply with local and national safety
requirements.
• Use proper protective equipment as required by
local and national authorities.
2
3
• Observe the proper safety precautions when
working with voltages above 33 VAC rms to avoid
electrical shock hazard.
• Before and after hazardous voltage measurements,
test the Tic 300 PRO by pressing the TEST button
and/or on a known source such as line voltage to
determine proper operation.
• Never ground yourself when taking measurements.
Do not touch exposed circuit elements.
• Do not operate the instrument in an explosive
atmosphere.
• Do not expose this product to rain or moisture. This
increases the risk of fire or electric shock.
• Do not rely on this tester for shielded wire.
• Do not let the unit make contact with a live line
with voltage higher than 20 kV.
• 3 phase feeder cables with conductors close to each
other may self-cancel the electric field and not be
detected by your Tic tracer. Verify that the phase
conductors are separated by at least 15” (381mm)
before testing for AC voltage.
UNPACKING AND INSPECTION
Your shipping carton should include:
1 TIC 300 PRO
1 9V Alkaline Battery
1 Users Manual
1 Carrying Case
If any of the items are damaged or missing, return
the complete package to the place of purchase for an
exchange.
4
5
INTRODUCTION
The TIC 300 PRO is an instrument for safely checking
the presence of an AC voltage without making any
disconnection in cables, wall sockets, fuses, circuit
breakers, junction boxes, etc. No current flow is needed
for correct operation.
Rugged and reliable for utility, industrial and mine safety
applications, The TIC 300 PRO warns against dangerous
voltages in low and medium voltage applications up to
122 KV without contacting the energized conductor.
Features
• Utility tool for checking transmission lines, power
distribution equipment, down power lines, fuses,
and load break connectors
• Lower voltage setting for checking voltage
presence in breaker panels, breakers, power
outlets and wiring
• Verifies presence of Voltage from 30 VAC to
122,000 VAC (122kV)
• Non-contact AC voltage detection
• Visual and audible voltage indication
• Self-test verifies that tester works properly
• Ergonomic design with a convenient handle
• Drop-proof to 6-FT
Used with Hot Stick TIC 410A for voltage higher than
1500V
Autres manuels pour TIC 300 PRO
3
Table des matières
Langues :
Autres manuels Amprobe Instrument de mesure
Amprobe
Amprobe LM-120 Manuel utilisateur
Amprobe
Amprobe AC40C Manuel utilisateur
Amprobe
Amprobe PRM-4 Manuel utilisateur
Amprobe
Amprobe WT-20 Manuel utilisateur
Amprobe
Amprobe UDM45 Manuel utilisateur
Amprobe
Amprobe VPC-20 Manuel utilisateur
Amprobe
Amprobe ACD-16 Pro Manuel utilisateur
Amprobe
Amprobe TMA-21HW Manuel utilisateur
Amprobe
Amprobe WT-30 Manuel utilisateur
Amprobe
Amprobe TMA-21HW Manuel utilisateur
Amprobe
Amprobe TACH-10 Manuel utilisateur
Amprobe
Amprobe TMD-10 Manuel utilisateur
Amprobe
Amprobe WT-30 Manuel utilisateur
Amprobe
Amprobe WT-60 Manuel utilisateur
Amprobe
Amprobe ACD-6 Pro Manuel utilisateur
Amprobe
Amprobe 3730217 Manuel utilisateur
Amprobe
Amprobe AM-270 Manuel utilisateur
Amprobe
Amprobe MO-100 Manuel utilisateur
Amprobe
Amprobe ACD-23SW Manuel utilisateur
Amprobe
Amprobe AM-500 Mode d’emploi
Manuels Instrument de mesure populaires d'autres marques
Endress+Hauser
Endress+Hauser Proline Promag 50 Caractéristiques techniques
Siemens
Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces
KLINGER
KLINGER CMF V Series Manuel utilisateur
EXFO
EXFO FTB-2 Manuel d'exploitation et d'entretien
Keysight
Keysight M8290A Manuel utilisateur
ADTEK
ADTEK MW-5 Manuel utilisateur