Amprobe THWD-10 Manuel utilisateur

Users Manual

• Mode d’emploi

• Bedienungshandbuch

• Manual d’Uso

• Manual de uso

THWD-10 / THWD-10W

RH Meter

RH Meter with Wireless

THWD-10

THWD-10W

RH Meter

RH Meter with Wireless

Users Manual

June 2010, Rev.1

English

Limited Warranty and Limitation of Liability

Your Amprobe product will be free from defects in material and

workmanship for 1 year from the date of purchase. This warranty

does not cover fuses, disposable batteries or damage from accident,

neglect, misuse, alteration, contamination, or abnormal conditions

of operation or handling. Resellers are not authorized to extend

any other warranty on Amprobe’s behalf. To obtain service during

the warranty period, return the product with proof of purchase

to an authorized Amprobe Test Tools Service Center or to an

Amprobe dealer or distributor. See Repair Section for details. THIS

WARRANTY IS YOUR ONLY REMEDY. ALL OTHER WARRANTIES -

WHETHER EXPRESS, IMPLIED OR STAUTORY - INCLUDING IMPLIED

WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR

MERCHANTABILITY, ARE HEREBY DISCLAIMED. MANUFACTURER

SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL

OR CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY

CAUSE OR THEORY. Since some states or countries do not allow the

exclusion or limitation of an implied warranty or of incidental or

consequential damages, this limitation of liability may not apply

to you.

Repair

All test tools returned for warranty or non-warranty repair or

for calibration should be accompanied by the following: your

name, company’s name, address, telephone number, and proof of

purchase. Additionally, please include a brief description of the

problem or the service requested and include the test leads with

the meter. Non-warranty repair or replacement charges should be

remitted in the form of a check, a money order, credit card with

expiration date, or a purchase order made payable to Amprobe®

Test Tools.

In-Warranty Repairs and Replacement – All Countries

Please read the warranty statement and check your battery before

requesting repair. During the warranty period any defective test

tool can be returned to your Amprobe® Test Tools distributor for

an exchange for the same or like product. Please check the “Where

to Buy” section on www.amprobe.com for a list of distributors near

you. Additionally, in the United States and Canada In-Warranty

repair and replacement units can also be sent to a Amprobe® Test

Tools Service Center (see address below).

Non-Warranty Repairs and Replacement – US and Canada

Non-warranty repairs in the United States and Canada should be

sent to a Amprobe® Test Tools Service Center. Call Amprobe® Test

Tools or inquire at your point of purchase for current repair and

replacement rates.

In USA In Canada

Amprobe Test Tools Amprobe Test Tools

Everett, WA 98203 Mississauga, ON L4Z 1X9

Tel: 877-AMPROBE (267-7623) Tel: 905-890-7600

Non-Warranty Repairs and Replacement – Europe

European non-warranty units can be replaced by your Amprobe®

Test Tools distributor for a nominalv charge. Please check the

“Where to Buy” section on www.amprobe.com for a list of

distributors near you.

European Correspondence Address*

Amprobe® Test Tools Europe

In den Engematten 14

79286 Glottertal, Germany

Tel.: +49 (0) 7684 8009 - 0

*(Correspondence only – no repair or replacement available from

this address. European customers please contact your distributor.)

THWD-10/THWD-10W RH Meter

THWD-10

RH Meter

THWD-10W

1) “ ” Power

2) °C /°F

3) “ ” backlight

4) “REL” Relative

5) “MAX/MIN” Record

6) “HOLD” Data Hold

7) “WB/DP” WB/DP/Ambient

temperature

8) “K/NTC/K-DP”

9) “SAVE” data save

10) “READ” data recall

11) Wireless(THWD-10W)

12) Display

13) Input

1) Humidity display

2) Temperature display

3) K type temperature

measurement mode

4) NTC temperature

measurement mode

5) K type temperature

minutes Dew point

temperature mode

6) Automatic power off

enabled

Screen Display

7) Low battery

8) Relative enabled

9) HOLD enabled

10) Maximum,Minimum,

Maximum-Minimum,

or average reading

displayed

11) Wet bulb or dew point

temperature displayed

12) Wireless function

enabled (THWD-10W)

6 1

4 53

CONTENTS

SYMBOLS............................................................................ 2

UNPACKING AND INSPECTION .......................................... 4

INTRODUCTION .................................................................. 4

Features .......................................................................... 4

OPERATION INSTRUCTIONS............................................... 5

““ Power Switch.......................................................... 5

“°C/°F” Selecting the Temperature Scale ..................... 5

“” Button.................................................................... 5

“REL” Button.................................................................. 5

“MAX/MIN” Button ....................................................... 5

“HOLD” Button .............................................................. 6

“WB/DP” Button ............................................................ 6

“K/NTC/K-DP” Button.................................................... 6

“SAVE” Button ............................................................... 7

“READ”, “ ”, “ ” Button........................................... 7

Wireless Mode................................................................ 7

SPECIFICATION.................................................................... 8

MAINTENANCE................................................................... 11

SYMBOLS

Caution! Refer to the explanation in this Manual

Complies with European Directives

Tested Comply With FCC Standards

Do not dispose of this clamp meter as unsorted

municipal waste.



WARNING and PRECAUTIONS

• To avoid electrical shock, do not use this instrument

when working voltages at the measurement surface

over 24V AC or DC.

• To avoid damage or burns, do not make

temperature measurement in microwave ovens.

• Repeated sharp exing can break the thermocouple

leads. To prolong lead life, avoid sharp bends in the

leads, especially near the connector.

• Do not immerse the hygrometer sensor head into

liquids since this causes permanent damage to the

sensor.

Federal Communications Commission

This device THWD-10W complies with Part 15 of the

FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any

interference received, including interference that may

cause undesired operation.

Note

This equipment THWD-10W has been tested and found

to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection. This

equipment generates, uses and can radiated radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there

is no guarantee that interference will not occur in a

particular installation if this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a

circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV

technician for help.

Shielded interface cables must be used in order to comply

with emission limits.

Changes or modiﬁcations not expressly approved by the

party responsible for compliance could void the user’s

authority to operate the equipment.

Wireless Note

Wireless receiver must keep a distance at least 40cm from

the meter and meter to meter distance must be at least

30cm.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Amprobe Instrument de mesure

Amprobe

Amprobe ACDC-620T Manuel utilisateur

Amprobe

Amprobe PM55A Manuel utilisateur

Amprobe

Amprobe ACDC-3400 IND Manuel utilisateur

Amprobe

Amprobe CT-326-C Manuel utilisateur

Amprobe

Amprobe ACD-10 PRO Manuel utilisateur

Amprobe

Amprobe ACD-30P Manuel utilisateur

Amprobe

Amprobe ACD-6 Pro Manuel utilisateur

Amprobe

Amprobe ECB50A Manuel utilisateur

Amprobe

Amprobe TH-1 Manuel utilisateur

Amprobe

Amprobe ACF3000 AK Manuel utilisateur

Amprobe

Amprobe VPC-10 Manuel utilisateur

Amprobe

Amprobe ACD-16 Pro Manuel utilisateur

Amprobe

Amprobe WT-50 Manuel utilisateur

Amprobe

Amprobe LM-200LED Manuel utilisateur

Amprobe

Amprobe AT-3500 Manuel utilisateur

Amprobe

Amprobe THWD-3 Manuel utilisateur

Amprobe

Amprobe VPC-20 Manuel utilisateur

Amprobe

Amprobe WT-30 Manuel utilisateur

Amprobe

Amprobe CO2-100 Manuel utilisateur

Amprobe

Amprobe LM-120 Manuel utilisateur

Amprobe

Amprobe AT-6000-R Manuel utilisateur

Amprobe

Amprobe MAN15 Manuel utilisateur

Amprobe

Amprobe SM-10 Manuel utilisateur

Amprobe

Amprobe CM100 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur