AJAX DoorProtect Plus Manuel utilisateur

DoorProtect Plus User Manual

Updated October 18, 2019

DoorProtect Plus is a wireless security device which detects opening,

shocks, and tilting. It has a socket for connecting an external detector.

DoorProtect Plus is connected to the Ajax security system via the

protected Jeweller protocol, with an effective communication range of up to

1,200 meters without obstacles. Can operate up to 5 years from a pre-

installed battery and is furnished with a sealed contact reed relay

processing more than one million openings. It has a socket for connecting

an external detector.

Sealed contact reed relay is a device which forms a continuous circuit under the effect of a

constant magnet. It consists of ferromagnetic contacts placed in a bulb.

The detector is set up via a mobile application for iOS and Android-based

smartphones. The user is notified of all events through push notifications,

SMS messages and calls (if activated).

Not compatible with the uartBridge or ocBridge Plus

The Ajax security system is self-sustaining, but the user can connect it to

the central monitoring station of a private security company.

Buy opening detector with shock and tilt sensor DoorProtect Plus

Functional Elements

1. DoorProtect Plus

2. Big magnet

3. Small magnet

4. Light indicator

5. SmartBracket attachment panel (perforated part is required for actuating

the tamper in case of any attempt to tear off the detector from the surface)

6. External detector connection socket

7. QR code

8. Device switch

9. Tamper button

DoorProtect Plus Operating Principle

DoorProtect Plus consists of the detector with a sealed contact reed relay,

and a constant magnet. The detector is equipped with two magnets – small

and big, with the magnet operation ranges of 1 and 2 cm accordingly. The

detector is attached to a moving wing or sliding part and the magnet – to a

frame. If the sealed contact reed relay is within the coverage area of the

magnetic field, it closes the circuit – the detector is closed. The opening of

the wing distances the magnet from the sealed contact reed relay, resulting

in the circuit opening, and the detector records opening.

The detector may be positioned horizontally. If there is no need to detect

opening with the sealed contact reed relay, please use only an electronics

unit (without magnets) and disable the magnetic sensor in the settings.

Tilt detector detects the vertical deviation of the device relative to the initial

position of more than 5°. DoorProtect Plus can be installed on windows

including dormer windows, and the system can be armed, when they are in

the airing mode (you should рreviously disable the magnetic sensor in the

settings).

After actuation, the DoorProtect Plus detector set in the intrusion detection

mode immediately transmits an alarm signal to the Ajax hub, activating the

sirens connected to the hub and notifying the user and private security

company.

Detector Connection to hub

Before starting connection

1. Following the hub instruction recommendations, install the Ajax

application on your smartphone. Create an account, add the hub to the

application, and create at least one room.

2. Go to the Ajax application.

3. Switch on the hub and check the internet connection (via Ethernet cable

and/or GSM network).

4. Ensure that the hub is disarmed and does not start updates by checking its

status in the mobile application.

Only users with administrative privileges can add the device to the hub

How to connect the detector to the hub

1. Select the Add Device option in the Ajax application.

2. Name the device, scan/write manually the QR Code (located on the body

and packaging), and select the location room.

3. Select Add — the countdown will begin.

4. Switch on the device.

For the detection and interfacing to occur, the detector should be located

within the coverage area of the wireless network of the hub (at a single

protected object).

Request for connection to the hub is transmitted for a short time at the time

of switching on the device.

If connection to the Ajax hub failed (LED blinks once per second), switch off

the detector for 5 seconds and repeat the attempt.

The detector connected to the hub will appear in the list of devices of the

hub in the application. Update of the detector statuses in the list depends

on the device inquiry time set in the hub settings, with the default value –

36 seconds.

States

1. Devices

2. DoorProtect Plus

Parameter Value

Temperature Temperature of the Detector. This is measured on the processor

and changes gradually

Signal Strength Signal strength between the hub and the detector

Battery Charge Battery level of the detector, displayed in increments of 25%

Lid The tamper mode of the detector, which reacts to the detachment

of or damage to the body

Delay when entering, sec Delay time when entering

Delay when leaving, sec Delay time when exiting

Connection Connection status between the hub and the detector

Primary Detector Primary detector status

Secondary detector Status of the external detector connected to DoorProtect Plus

Always active If active, the detector is always in the armed mode

Shock sensor If active, DoorProtect Plus will detect the shock

Tilt sensor If active, DoorProtect Plus will detect tilt angle changing

Firmware Detector firmware version

Device ID Device identifier

Setting Up the Detector

1. Devices

2. DoorProtect Plus

3. Settings

Autres manuels pour DoorProtect Plus

Table des matières

Autres manuels AJAX Capteur de sécurité

AJAX

AJAX LeaksProtect Manuel utilisateur

AJAX

AJAX CombiProtect Manuel utilisateur

AJAX

AJAX FireProtect 2 (CO) Jeweller Manuel utilisateur

AJAX

AJAX FireProtect 2 Jeweller Manuel utilisateur

AJAX

AJAX DoorProtect Manuel utilisateur

AJAX

AJAX HomeSiren Manuel utilisateur

AJAX

AJAX LeaksProtect Manuel utilisateur

AJAX

AJAX FireProtect 2 Heat/CO Jeweller Manuel utilisateur

AJAX

AJAX DoorProtect Plus Manuel utilisateur

AJAX

AJAX MotionProtect Manuel utilisateur

AJAX

AJAX MotionProtect Plus Fibra Manuel utilisateur

AJAX

AJAX LeaksProtect Manuel utilisateur

AJAX

AJAX GlassProtect Manuel utilisateur

AJAX

AJAX GlassProtect Fibra Manuel utilisateur

AJAX

AJAX FireProtect 2 (Heat) Jeweller Manuel utilisateur

AJAX

AJAX MotionCam Jeweller Manuel utilisateur

AJAX

AJAX FireProtect Manuel utilisateur

AJAX

AJAX LeaksProtect Manuel utilisateur

AJAX

AJAX MotionProtect Jeweller Manuel utilisateur

AJAX

AJAX MotionProtect Manuel utilisateur

AJAX

AJAX FireProtect 2 Manuel utilisateur

AJAX

AJAX MotionProtect Manuel utilisateur

AJAX

AJAX GlassProtect Manuel utilisateur

AJAX

AJAX DoorProtect Manuel utilisateur

Manuels Capteur de sécurité populaires d'autres marques

THORLABS

THORLABS PDA10JT Manuel utilisateur

Waeco

Waeco UV-DETECT Manuel utilisateur

Intermatic

Intermatic IOS-DSIMF Manuel utilisateur

urmet domus

urmet domus 1083 Manuel utilisateur

Siemens

Siemens AZL66 Series Manuel utilisateur

BTI

BTI Profiline Multi Finder Manuel utilisateur

Challenger

Challenger SL01 Manuel utilisateur

DMP Electronics

DMP Electronics 1122INT Manuel utilisateur

Rielta

Rielta Ladoga MK-RK Manuel utilisateur

Mirion Technologies

Mirion Technologies ACCURAD PRD Manuel utilisateur

Bosch

Bosch DS835 Manuel utilisateur

DBI SALA

DBI SALA EZ Stop Manuel de l'opérateur

Lamptime

Lamptime ST05C Manuel utilisateur

Ubiquiti

Ubiquiti MFI-MSC Manuel utilisateur

Subsite

Subsite 910R Instructions d'installation

Satel

Satel OPAL Pro Manuel utilisateur

Aleph

Aleph XC-1XTEU Manuel utilisateur

Pima

Pima LARIS QUAD Manuel utilisateur