AJAX MotionProtect Manuel utilisateur

Motion Protect User Manual

Motion Protect is a wireless motion detector designed for indoor use. It

can operate for up to 5 years from an in-built battery, and monitors the area

within 12-meter radius. Motion Protect ignores animals, while recognizes a

human from the first step.

Motion Protect operates within the Ajax security system, connected to

the hub via the protected Jeweller protocol. The communication range is up

to 1700 meters in the line of sight. In addition, the detector can be used as

a part of third-party security central units via the Ajax uartBridge or Ajax

ocBridge Plus integration modules.

The detector is set up via the Ajax app for iOS, Android, mac OS and

Windows. The system notifies user of all events through push notifications,

SMS and calls (if activated).

The Ajax security system is self-sustaining, but the user can connect it to

the central monitoring station of a security company.

Functional Elements

1. LED indicator

2. Motion detector lens

3. Smart Bracket attachment panel (perforated part is required for actuating

the tamper in case of any attempt to dismantle the detector)

4. Tamper button

5. Device switch

6. QR code

Operating Principle

Thermal PIR sensor of Motion Protect detects intrusion into protected room

by detecting moving objects whose temperature is close to the temperature

of the human body. However, the detector can ignore domestic animals if

the suitable sensitivity has been chosen in the settings.

After actuation, the armed detector immediately transmits an alarm signal

to the hub, activating the sirens and notifying the user and Security

Company.

If before arming the system, the detector has detected motion, it will not

arm immediately, but during the next inquiry by the hub.

Connecting the Detector to the Ajax

Security System

Connecting the Detector to the hub

Before starting connection:

1. Following the hub manual recommendations, install the Ajax application.

Create an account, add the hub to the application, and create at least one

room.

2. Switch on the hub and check the internet connection (via Ethernet and/or

GSM network).

3. Make sure that the hub is disarmed and does not update by checking its

status in the app.

Only users with administrator rights can add the device to the hub

How to connect the detector to the hub:

1. Select the Add Device option in the Ajax application.

2. Name the device, scan/write manually the QR Code (located on the body

and packaging), and select the location room.

3. Select Add —the countdown will begin.

4. Switch on the device.

For detection and pairing to occur, the detector should be located within the

coverage of the wireless network of the hub (at a single protected object).

Request for connection to the hub is transmitted for a short time at the

moment of switching on the device.

If the detector failed to connect to the hub, switch off the detector for 5

seconds and retry.

The connected detector will appear in the devices list in the application.

Update of the detector statuses in the list depends on the device inquiry

time set in the hub settings (default value is 36 seconds).

Connecting the Detector to Third Party security systems

To connect the detector to a third party security central unit with

the uartBridge or ocBridge Plus integration module, follow the

recommendations in the manuals of these devices.

States

1. Devices

2. Motion Protect

Parameter

Value

Temperature

Temperature of the Detector. Measured on the processor and

changes gradually

Jeweller Signal Strength

Signal strength between the hub and the detector

Connection

Connection status between the hub and the detector

Battery Charge

Battery level of the detector, displayed in increments of 25%

Lid

The tamper mode of the detector, which reacts to the

detachment of or damage of the body

Delay when entering, sec

Delay time when entering

Delay when leaving, sec

Delay time when exiting

Routed through ReX

Displays the status of using the ReX range extender

Sensitivity

Sensitivity level of the motion sensor

Always Active

If active, the motion detector is always in the armed mode

Firmware

Detector firmware version

Device ID

Device identifier

Settings

1. Devices

2. Motion Protect

3. Settings

Setting

Value

First field

Detector name, can be edited

Room

Selecting the virtual room to which the device is assigned

Delay when entering, sec

Selecting delay time when entering

Delay when leaving, sec

Selecting delay time on exit

Delays in night mode

Delay turned on when using night mode

Arm in night mode

If active, the detector will switch to armed mode when using

night mode

Sensitivity

Choosing the sensitivity level of the motion sensor.

For Motion Protect:

•High —for premises with a minimum amount of obstacles,

motion is detected as quickly as possible

•Medium —for premises with potential obstacles (windows, air

conditioner, heating element, etc.)

•Low —ignore pets weighing up to 20 kg and up to 50 cm tall

•

Always active

If active, the detector always registers motion

Alert with a siren if motion detected

If active, Home Siren and Street Siren are activated when the

motion detected

Jeweller Signal Strength Test

Switches the detector to the signal strength test mode

Detection Zone Test

Switches the detector to the detection area test

Attenuation test

Switches the detector to the signal attenuation test mode

(available in detectors with firmware version 3.50 and later)

User Guide

Opens the User Guide

Un pair device

Disconnects the detector from the hub and deletes its settings

Before using the detector as a part of the security system, set up the

suitable sensitivity level.

Switch the Always Active if the detector is located in a room requiring 24-

hour control. Regardless of whether the system is set in the armed mode,

you will receive notices of any detected motion.

If any motion is detected, the detector activates the LED for 1 second and

transmits an alarm signal to the hub and then to the user and central

monitoring station (if it is connected).

Detector operation indication

Event

Indication

Note

Turning on the detector

Lights up green for about one

second

Detector connection to

the hub, ocBridge and ua

rtBridge

Lights up continuously for a few

seconds

Alarm / tamper activation

Lights up green for about one

second

Alarm is sent once in 5 seconds

Battery needs replacing

During the alarm, slowly lights up

and goes off green

Replacement of the detector battery is

described in the Battery

Replacement manual

Detector Testing

The Ajax security system allows conducting tests for checking the

functionality of connected devices.

The tests do not start immediately but within a period of 36 seconds when

using the standard settings. The time of the start depends on the settings of

the detector polling period (the paragraph on Jeweller settings in the hub

settings).

Device installation

Selection of the Detector Location

The controlled area and the efficiency of the security system depends on

the location of the detector.

Location of Motion Protect depends on the remoteness from the hub and

presence of any obstacles between the devices hindering the radio signal

transmission: walls, inserted floors, large-size objects located within the

room.

Check the signal level at the installation location

If the signal level is at one bar, we cannot guarantee stable operation of the

security system. Take all possible measures to improve the quality of the

signal! As a minimum, move the device –even 20 cm shift can significantly

improve the quality of reception.

If after moving the device still has a low or unstable signal strength, use

the ReX Radio signal range extender.

The direction of the detector lens should be perpendicular to the probable way of

intrusion into the room

Make sure that any furniture, domestic plants, vases, decorative or glass

structures do not block the field of view of the detector.

We recommend installing the detector at the height of 2.4 meters.

If the detector is not installed at the recommended height, this will reduce

the area of the motion detection zone and impair the operation of the

function of ignoring animals.

Installation of the Detector

Before installing the detector, make sure that you have selected the optimal location and it is in

compliance with the guidelines contained in this manual

Autres manuels pour MotionProtect

Table des matières

Autres manuels AJAX Capteur de sécurité

AJAX

AJAX MotionProtect Manuel utilisateur

AJAX

AJAX FireProtect 2 (Heat) Jeweller Manuel utilisateur

AJAX

AJAX MotionCam Jeweller Manuel utilisateur

AJAX

AJAX DoorProtect Manuel utilisateur

AJAX

AJAX GlassProtect Manuel utilisateur

AJAX

AJAX MotionProtect Manuel utilisateur

AJAX

AJAX MotionProtect Plus Manuel utilisateur

AJAX

AJAX FireProtect Manuel utilisateur

AJAX

AJAX GlassProtect Manuel utilisateur

AJAX

AJAX CombiProtect Manuel utilisateur

AJAX

AJAX FireProtect Manuel utilisateur

AJAX

AJAX LeaksProtect Manuel utilisateur

AJAX

AJAX MotionProtect Manuel utilisateur

AJAX

AJAX ReX Manuel utilisateur

AJAX

AJAX DoorProtect Manuel utilisateur

AJAX

AJAX FireProtect 2 Jeweller Manuel utilisateur

AJAX

AJAX MotionProtect Fibra Manuel utilisateur

AJAX

AJAX LeaksProtect Manuel utilisateur

AJAX

AJAX GlassProtect Manuel utilisateur

AJAX

AJAX GlassProtect Manuel utilisateur

AJAX

AJAX MotionProtect Manuel utilisateur

AJAX

AJAX MotionProtect Manuel utilisateur

AJAX

AJAX LeaksProtect Manuel utilisateur

AJAX

AJAX FireProtect Manuel utilisateur

Manuels Capteur de sécurité populaires d'autres marques

THORLABS

THORLABS PDA10JT Manuel utilisateur

Waeco

Waeco UV-DETECT Manuel utilisateur

Intermatic

Intermatic IOS-DSIMF Manuel utilisateur

urmet domus

urmet domus 1083 Manuel utilisateur

Siemens

Siemens AZL66 Series Manuel utilisateur

BTI

BTI Profiline Multi Finder Manuel utilisateur

Challenger

Challenger SL01 Manuel utilisateur

DMP Electronics

DMP Electronics 1122INT Manuel utilisateur

Rielta

Rielta Ladoga MK-RK Manuel utilisateur

Mirion Technologies

Mirion Technologies ACCURAD PRD Manuel utilisateur

Bosch

Bosch DS835 Manuel utilisateur

DBI SALA

DBI SALA EZ Stop Manuel de l'opérateur

Lamptime

Lamptime ST05C Manuel utilisateur

Ubiquiti

Ubiquiti MFI-MSC Manuel utilisateur

Subsite

Subsite 910R Instructions d'installation

Satel

Satel OPAL Pro Manuel utilisateur

Aleph

Aleph XC-1XTEU Manuel utilisateur

Pima

Pima LARIS QUAD Manuel utilisateur