AJAX FireProtect 2 Jeweller Manuel utilisateur

Technical Data Sheet: FireProtect 2 (Heat/Smoke/CO) Jeweller

Je eller

FireProtect 2

(Heat/Smoke/CO

Jeweller

Wireless re detector ith heat, smoke, and CO

sensors. Features a built-in siren for alarms

and events notication. Operates as part

of the Ajax system or ithout pairing

ith an Ajax hub.

Find the detailed information

on the device at:

support.ajax.systems/en/manuals/reprotect-2-heat-smoke-co/

The device is available in t o versions: ith replaceable or sealed batteries. The name

of a detector ith replaceable batteries contains the RB mark, and ith sealed batteries — SB

FireProtect 2 RB (Heat/Smoke/CO) Je elle

FireProtect 2 SB (Heat/Smoke/CO) Je eller

Key features

Accurate detection of threats

 HazeFlow 2 smoke detection algorithm to lter false alarm

 Dual-spectrum optical sensor ignores vapour and water stea

 Maintenance-free smoke chamber that does not require regular clean-ups

Advanced hardware and software

 An interconnected alarm of all re detectors at the facilit

in 2

second



uilt-in siren with a volume of

at a distance of

meters



 Abilit

to operate autonomousl

without an A







ears of operation with sealed batteries

and up to

ears

—

with replaceable batteries

mark

1460

00

008



018

Technical Data Sheet: FireProtect 2 (Heat/Smoke/CO) Jeweller

Easy to install and congure

 SmartBracket mounting panel with the ability to align the detector after installatio

 Remote control and conguring via Ajax app

 Pairing with the Ajax hub via QR code

Operating principle

Smoke detection

FireProtect 2 detects smoke and does not react

to water vapour thanks to a dual-spectrum

optical sensor with blue and infrared LEDs. LEDs

emit light with different wavelengths, which

allows the detector to determine the size

of the volatile particles and react only to smoke.

The detector's smoke chamber is protected from dust, dirt, and insects. Even if dust enters and settles

in the smoke chamber, it does not threaten or impair the detection. The optical system is designed

so that non-volatile particles or insects cannot be in two beams simultaneously and cause a false alarm.

Detection of a rapid

temperature rise

Two built-in thermistors are responsible for the reaction

to temperature rise. Thermistors are located outside

the detector for faster threat detection.

If the room temperature exceeds +64°C or increases

at more than 10°C within a minute, the detector

recognizes this as a rapid temperature rise and raises

the alarm.

Detection of dangerous

concentration le

A built-in chemical sensor with a service life

of at least 10 years is responsible for detecting

a dangerous concentration of carbon monoxide

in FireProtect 2.

Technical Data Sheet: FireProtect 2 (Heat/Smoke/CO) Jeweller

Carbon monoxide (CO) is a colourless, tasteless, and odourless gas produced due to incomplete uel

combustion in automobile engines and heating appliances that use coal or other natural uels. For example,

it can be made by replaces, boilers, or heating systems. In airtight or closed rooms with poor ventilation,

li e-threatening concentrations o carbon monoxide can accumulate.

Interconnected re detectors alarms

The detector supports interconnected re alarms.

The eature activates built-in sirens o all Ajax re

detectors at the acility i at least one o them

is triggered. In case o a re, this allows alerting

as many people as possible.

FireProtect 2 detectors have an improved

interconnected re alarm algorithm that activates all re

detectors' sirens within 20 seconds. The unction

is available only when detectors operate with the hub.

Operation without a hub

FireProtect 2 detectors can be used without

pairing with an Ajax hub. In this case,

the detector noties re alarms with a built-in

siren and LED indication, and does not send

a notication to the user's smartphone, Ajax

Translator, or PRO Desktop.

Manual and automatic testing

FireProtect 2 regularly checks the status o batteries and built-in sensors. I a mal unction is detected,

the hub will noti y users and the monitoring station instantly. And the detector will turn on the light and sound

alert by the built-in siren and LEDs. All detector states can be checked at any time in Ajax apps.

The detector supports manual testing mode. It is activated by pressing the device's ront panel. The ront

panel has a mechanical button, which can be pressed either manually or with a oor mop. During the test,

the built-in siren and testing o sensors are run. This allows the installer to test the device at any time

and to demonstrate to the customer the light and sound indication o the detector or various types

o alarms.

Technical Data Sheet: FireProtect 2 (Heat/Smoke/CO) Jeweller

utonomous operation

FireProtect 2 (Heat/Smoke/CO) is available in two

versions: with replaceable or sealed batteries. Detectors

with replaceable batteries operate for up to 7 years

with pre-installed CR123A batteries. After discharge,

the batteries can be replaced with new ones. The model

with sealed lithium batteries operates for at least

10 years. After the batteries are discharged,

the detector should be replaced with a new one.

Jeweller

communication technology

Jeweller is a radio protocol for fast and reliable two-way communication between hubs and connected

devices. The protocol provides a wireless radio communication range with FireProtect 2 up to 1,700 meters.

This communication range allows you to install detectors even on large-scale objects.

Jeweller is responsible for transmitting alarms and events. The radio protocol also provides an interconnected

re detectors alarm activation within 20 seconds in a system with any number of FireProtect 2.

Thanks to Jeweller, users and the monitoring station can always see the current status of detectors

in Ajax apps.

Quick pairing and installation

There is no need to disassemble the detector

during installation. With an improved

SmartBracket panel, an installer can effortlessly

x the detector on ceilings and level it at 90°

angles after mounting. The Ajax apps help

quickly make the device a part of the system.

And it can always be recongured remotely

without site visits.

Technical Data Sheet: FireProtect 2 (Heat/Smoke/CO) Jeweller

Technical specica ions

Communication with

the hub or range

extender

Jeweller

communica ion

echnolog

Frequency band

866.0–866.5 MH

868.0–868.6 MH

868.7–869.2 MH

905.0–926.5 MH

915.85–926.5 MH

921.0–922.0 MH

Maximum effec ive

radia ed power (ERP

Up to 20 m

Communica ion rang

up to 1,700 

Depends on the region

of sale

In an open space.

Compliance with

regulations

EN 14604:2005/AC:200

EN 50291-1:201

Q mar

Compatibility Hub

Hub Plu

Hub 2 (2G

Hub 2 (4G

Hub 2 Plu

Hub Hybrid (2G

Hub Hybrid (4G

Range ex ender

Re

ReX 

Smoke detection

ensi ive elemen



dual-spectrum optical

senso



False alarms preven io





optical sensor ignores

ing fumes

and

ater stea





patented smo

chamber is dustproof

and impenetrable

for insect

2 smo

detection algorithm to



lter

false alarms

Technical Data Sheet: FireProtect 2 (Heat/Smoke/CO) Jeweller

Heat detection Sensitive elemen

two thermistor

Heat alar

 10°C increase in

temperature within 1

minut

 exceeding +64°

According to the

requirements for heat

A1R-class detectors

of EN 54-5 standard

Additional features Built-in sire

volume of 85 dB

at a distance of 3 meter

Interconnected re alar

All re detectors

in the system turn

on built-in sirens if at least

one of the detectors

registers an alarm.

LED indicatio

green is a power indicatio

yellow is an indication

of malfunction

The interconnected alarm

is activated after no more

than 20 seconds

Lights up once every

minute

Lights up when

malfunctions are detected.

For example, in the case

of discharged batteries,

contamination

of the smoke chamber,

or end of the service life.

Carbon monoxide

(CO) detection

Sensitive elemen

chemical C

senso



alar

 50 ppm

(

0.005

in no

more than

0 minute



 100 ppm

(

0.01

in no

more than 40 minute



 300 ppm

(

0.03

in no

more than 3 minute

Sensor service li

f

10 years

Anti

sabota

rotection

erin

alar



rotection a

ainst

oon



device authenticatio



Detection



communication

ailur



within 15 minute

The time to detect

communication loss

depends on the number

of undelivered data

packages setting

(

specied in the

eweller

eweller

Fibra settings

)

The polling interval

is xed at 300 seconds



Technical Data Sheet: FireProtect 2 (Heat/Smoke/CO) Jeweller

Additional feature red is an indication of re

alarm

Button on the front panel

of the detecto

In normal mode, when

pressed, it starts

the detector test

In the event of an alarm

or malfunction,

the pressing turns

off the detector sound

notication.

Lights up when

the detector detects a re

alarm

Enclo ure and

in tallation

Dimension

124 × 124 × 45 m

Weigh

274.5 

270 

Operating temperature

rang

from 0°С to +50°

Operating humidit

up to 80

Protection clas

IP2

Colour

Blac

White

For RB version

For SB version

Power upply RB versio

2 replaceable CR123A

batterie

SB versio

2 sealed lithium batterie

p to 7

y

ears of batter

life

ears of batter

life



Complete et RB version



FireProtect 2 RB

eat

Smo

ewelle



SmartBrac

et mounting

pane



Installation



2 × CR123A batteries

(

pre

installed

uic

start guid



SB versio

FireProtect 2 SB

eat

Smo

ewelle



SmartBrac

et mounting

pane



Installation



uic

start guid



Autres manuels pour FireProtect 2 Jeweller

Autres manuels AJAX Capteur de sécurité

AJAX

AJAX DoorProtect Plus Manuel utilisateur

AJAX

AJAX LeaksProtect Manuel utilisateur

AJAX

AJAX FireProtect 2 Heat/CO Jeweller Manuel utilisateur

AJAX

AJAX DoorProtect Plus Manuel utilisateur

AJAX

AJAX GlassProtect Fibra Manuel utilisateur

AJAX

AJAX MotionProtect Manuel utilisateur

AJAX

AJAX FireProtect 2 Manuel utilisateur

AJAX

AJAX MotionProtect Manuel utilisateur

AJAX

AJAX MotionCam PhOD Jeweller Manuel utilisateur

AJAX

AJAX DualCurtain Outdoor Manuel utilisateur

AJAX

AJAX HomeSiren Manuel utilisateur

AJAX

AJAX MotionProtect Plus Fibra Manuel utilisateur

AJAX

AJAX DualCurtain Outdoor Manuel utilisateur

AJAX

AJAX FireProtect Manuel utilisateur

AJAX

AJAX MotionProtect Manuel utilisateur

AJAX

AJAX DoorProtect Manuel utilisateur

AJAX

AJAX MotionProtect Curtain Manuel utilisateur

AJAX

AJAX MotionProtect Plus Manuel utilisateur

AJAX

AJAX MotionProtect Manuel utilisateur

AJAX

AJAX FireProtect 2 Jeweller Manuel utilisateur

AJAX

AJAX MotionProtect Manuel utilisateur

AJAX

AJAX DoorProtect Manuel utilisateur

AJAX

AJAX MotionProtect Manuel utilisateur

AJAX

AJAX MotionCam Fibra Manuel utilisateur

Manuels Capteur de sécurité populaires d'autres marques

THORLABS

THORLABS PDA10JT Manuel utilisateur

Waeco

Waeco UV-DETECT Manuel utilisateur

Intermatic

Intermatic IOS-DSIMF Manuel utilisateur

urmet domus

urmet domus 1083 Manuel utilisateur

Siemens

Siemens AZL66 Series Manuel utilisateur

BTI

BTI Profiline Multi Finder Manuel utilisateur

Challenger

Challenger SL01 Manuel utilisateur

DMP Electronics

DMP Electronics 1122INT Manuel utilisateur

Rielta

Rielta Ladoga MK-RK Manuel utilisateur

Mirion Technologies

Mirion Technologies ACCURAD PRD Manuel utilisateur

Bosch

Bosch DS835 Manuel utilisateur

DBI SALA

DBI SALA EZ Stop Manuel de l'opérateur

Lamptime

Lamptime ST05C Manuel utilisateur

Ubiquiti

Ubiquiti MFI-MSC Manuel utilisateur

Subsite

Subsite 910R Instructions d'installation

Satel

Satel OPAL Pro Manuel utilisateur

Aleph

Aleph XC-1XTEU Manuel utilisateur

Pima

Pima LARIS QUAD Manuel utilisateur