Aidapt VP173FC Manuel

VP173FC/VP173FS/VP173FR

Steel 4-Wheeled Rollator

Fixing and Maintenance Instructions

This le is available to view and download as a PDF at

www.aidapt.co.uk. Sight impaired customers can use a

free PDF Reader (such as adobe.com/reader) to zoom in

and increase the text size for improved readability.

INTRODUCTION

ASSEMBLY INSTRUCTIONS

INTENDED USE

FEATURES

Thank you for purchasing the Steel Four-Wheeled Rollator from Aidapt.

These instructions should be read carefully and left with the user of the product for future

reference.

Please ensure this equipment is installed by a competent person.

VP173FC – Steel Four Wheeled Rollator 130kg (20.4st) Max Load

Do not exceed the weight limit stated – doing so could put you at risk.

Please examine your product for any visible damage before using/installing. If you see any damage or

suspect a fault, please do not use, but contact your supplier.

1. Carefully insert the brake assembly within the frame (g. 1).

2. Ensure when brake assembly is inserted that both brakes are even in height and the Rollator is

sitting evenly on the ground.

3. Insert locking hand wheel into the desired height adjustment hole (g. 2). Ensure that head of the

screw ts into the hexagonal hole on the inside of the tri-walker (see g. 2(a)) Turn clockwise to

tighten (g. 3).

The steel Rollator from Aidapt is a sturdy yet easy to manoeuvre design ideal for those who require extra

support when walking. The Rollator features a special bag designed specically to t your Rollator. Only

use bags designed for this Rollator.

Do not use or combine bags or baskets from other manufacturers.

In normal use, you can easily fold your Rollator and store away until required. The Rollator is designed for

use inside and outside the home. Please ensure ngers are clear of the locking mechanism to reduce the

risk of entrapment when closing our Rollator.

• User friendly loop brakes lever with lock

• Simple brake cable adjustment

• Soft plastic solid wheels

• Swivelling front wheel

• Folding locking mechanism

Fixing and Maintenance Instructions

g. 3g. 2 g. 2(a)g. 1

• Height adjustment

• User friendly height adjustment

• Ergonomic handgrips to reduce pressure

• Includes a bag

CENTRAL LOCKING MECHANISM AND USE

PADDED BACK

1. Open out the Rollator frame by pulling the cross bars outwards in opposite directions forming an

inverted ‘V’ with the main frame (g. 4, g. 4 (a).

2. Ensure your Rollator is fully extended, and check that sidebars are straight and level (g. 5).

1. To install the half round

padded back, rst line up

the ends of the tubular

back with the locating

points (g. 6, g. 6 (a)).

Fixing and Maintenance Instructions

g. 4 g. 5

g. 4 (a)

g. 6 g. 6 (a)

FITTING THE CARRY BAG (SHOULD COME FITTED)

1. The Rollator bag should

be tted when the walker

is set in the open position

(g. 4 (a)).

2. Take the strap situated

upon the upper side of

the Rollator bag, and wrap

this around the diagonal

bar of the frame and

push the stud fasteners

together (g. 7). Repeat

on the opposite side. g. 7

Fixing and Maintenance Instructions

ADJUSTMENT TO BRAKES

1. Your brake system will require periodic adjustment. The brake adjustment is similar to bicycle

brakes.

2. (g. 12) Shows the brake handle in its default delivered position. Should the brakes need adjusting

they can be tightened by unlocking Nut A and then unscrewing (anti-clockwise) Nut B. When the

brake arm has a 3mm clearance (g. 14) then Nut A should be retightened. An example of a user

adjusted brake handle is shown in (g. 13).

3. When adjusted, the brakes should work in both normal braking and in parking mode. If needed

then Nut B (g. 12 & g. 13) can be turned a further anti-clockwise, which will tighten the brake

cable more.

4. If the brake handles are fully adjusted and more tightening is required refer to (g. 14) where

further adjustment can be made.

5. After adjustment, check the park brakes by pushing down on the brake handles, ensuring that both

STORAGE

OPERATING THE BRAKES

1. Grip the side bar and lift (g. 11).

2. Continue lifting until the Rollator fully close (g. 4).

3. You may also wish to remove the half-round back from storage;

to do so pull the silver coloured locking buttons located on

either side of the tube lock outwards (g. 6(a)), then lift up the

back to detach (g. 6).

The handbrake on your Aidapt Rollator works very similar to a bicycle hand brake:

1. To stop, gently apply a gripping pressure to both brakes simultaneously, this will slow down and

stop your Rollator (g. 8).

2. The brakes on your Rollator have a park option. To operate the park option, push downwards on

both brakes simultaneously. You will feel the brake make a very slight click. Your brakes are now in

the ‘lock’ position (g. 9).

3. To unlock, simply pull up the brake again, you will hear a slight click as the‘park’ disengages (g.

10).

g. 11

g. 9 g. 10g. 8

g. 13g. 12

Fixing and Maintenance Instructions

g. 14

Nut A Nut A

Nut B Nut B

3mm

Default Position User Adjusted Position

brakes lock in the park position.

6. With the brakes o, lift the two ‘braked’ wheels o the ground and spin to ensure they turn freely.

If either of the braked wheels rub onto the brake arm, please check obstructions and repeat the

brake adjustment procedure above.

7. It is important that you check brake adjustments on a regular basis to take into account wear and

tear. However, brake adjustment must be checked at least once a month and denitely prior to a

change of user.

CARE, MAINTENANCE AND YOUR OBLIGATION

1. Only use your Aidapt Rollator for the purpose for which is intended, which is as an aid to walking.

It is intended your rollator is only used on standard pavements or at home. It should not be used

on rough terrain or pot-holed surfaces. The use of your Rollator on these surfaces can seriously

compromise your safety and may damage your Rollator beyond repair.

2. Keep your Aidapt Rollator clean by wiping down with a damp cloth with a mild detergent. Do not

under any circumstances use an abrasive or solvent-based cleaner, as this will damage the Rollator

and void your warranty.

3. Wipe o all surfaces with a dry cloth and use a water dispersing agent such as WD40 on all metal

joints.

4. Check that all wheels and the folding mechanism function correctly and that all wheels move freely

and without obstruction.

Withdraw your Aidapt Rollator immediately if any of the wheels become dicult to turn or if

you suspect damage or any other fault.

5. Monthly checks – check that the side locking levers are poorly secure (g. 5). Check the adjustment

to your brakes (g. 14). Ensure that the brakes are correctly adjusted with 3mm between both tyres

and brake(s), check castors.

CLEANING

All of the product components are manufactured from quality materials. However, it is very important

that you only clean your Rollator using a non-abrasive cleaner or mild detergent with a soft cloth

avoid using lime scale remover. Abrasive cleaners or abrasive cleaning pads will seriously damage your

product beyond repair.

If to be disinfected by heat, one of the following three temperatures and duration of exposition can be

used:

a) a temperature of 90°C for 1 minute

b) a temperature of 85°C for 3 minutes

c) a temperature of 80°C for 10 minutes

IMPORTANT INFORMATION

SERVICE WARRANTY

The information given in this instruction booklet must not be taken as forming part of or establishing

any contractual or other commitment by Aidapt Bathrooms Limited or its agents or its subsidiaries and

no warranty or representation concerning the information is given.

Please exercise common sense and do not take any unnecessary risks when using this product; as the

user you must accept liability for safety when using the product.

Aidapt Bathrooms Ltd guarantees the product free from defects in material and workmanship for a

period of one year.

Should this product be operated under conditions other than those recommended, or any attempts

made to service or modify the product, then the warranty is rendered void.

The product you buy may dier slightly from illustrations. This warranty is in addition to, and does not

aect your statutory rights.

Our guarantee is administered by our retailers.

If your product arrives damaged, you must contact the retailer from whom you bought it. The retailers

contact details will be on the invoice that arrived with the product, or on the email you received when

you placed the order. Do not contact Aidapt Bathrooms Ltd, only your retailer can arrange a replacement

or refund.

If your product fails within the guarantee period, please contact the retailer from whom you bought it.

If you have received your product and require technical help, please call our help desk on 01744 745 000.

A copy of the instructions leaet can be downloaded from our website.

TECHNICAL INFORMATION

Width: 690mm

Depth: 610mm

Height: 790-900mm

Net Weight: 6.9kgs

6. Do not t any parts or accessories to your Aidapt Rollator manufactured by another company. To

do so will annul your warranty and may seriously compromise your safety.

7. We suggest that you check your Aidapt Rollator visually every day. However, we recommend that

you should have your Rollator serviced every three months or less if used regularly.

Please check the Rollator periodically for any signs of damage and if in doubt contact your supplier.

Fixing and Maintenance Instructions

Aidapt Bathrooms Ltd, Lancots Lane, Sutton Oak, St Helens, WA9 3EX

Telephone: +44 (0) 1744 745 020 Fax: +44 (0) 1744 745 001

Web: www.aidapt.com

Email: [email protected].uk

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels aidapt Aide à la mobilité

aidapt

aidapt VP183WHITE Manuel de programmation

aidapt

aidapt VM923 Manuel de programmation

aidapt

aidapt VM936R Manuel de programmation

aidapt

aidapt VP146SA Manuel

aidapt

aidapt VG868W Manuel

aidapt

aidapt VR165 Manuel

aidapt

aidapt VP155SA Manuel de programmation

aidapt

aidapt VP179 Manuel de programmation

aidapt

aidapt Linton Mobile Commode Series Manuel

aidapt

aidapt VY428S Manuel

aidapt

aidapt VP180 Guide rapide

aidapt

aidapt VB541 Manuel de programmation

aidapt

aidapt VM947 Manuel de programmation

aidapt

aidapt VB540C Manuel de programmation

aidapt

aidapt VP174RS Manuel

aidapt

aidapt VM907 Manuel de programmation

aidapt

aidapt VM940 Manuel de programmation

aidapt

aidapt VM945 Manuel de programmation

aidapt

aidapt VM705 Manuel de programmation

aidapt

aidapt VM942 Manuel de programmation

aidapt

aidapt Strolley Manuel

aidapt

aidapt VP159A Manuel utilisateur

aidapt

aidapt VP174 Manuel

aidapt

aidapt VG832 Manuel

Manuels Aide à la mobilité populaires d'autres marques

Alber

Alber Scalamobil iQ Manuel utilisateur

Ferno

Ferno CCT-PX Manuel utilisateur

HEPRO

HEPRO Gripo Manuel utilisateur

Otto Bock

Otto Bock Pheon 3R62 Manuel utilisateur

NRS Healthcare

NRS Healthcare M11090 Manuel utilisateur

Medline

Medline MDS86835DSHEC Guide d'installation

Guldmann

Guldmann Twin Turner II Manuel utilisateur

Drive

Drive ROOMBA Manuel utilisateur

Gate

Gate Balder Manuel utilisateur

Decon wheel

Decon wheel TNS Notos Manuel utilisateur

ExoAtlet

ExoAtlet ExoAtlet-II Manuel utilisateur

Invacare

Invacare Storm Series Mode d’emploi

Rhythm Healthcare

Rhythm Healthcare B3800F Manuel utilisateur

AMF-BRUNS

AMF-BRUNS PROTEKTOR Manuel utilisateur

Drive DeVilbiss Healthcare

Drive DeVilbiss Healthcare OTTER Manuel utilisateur

Rhythm Healthcare

Rhythm Healthcare C500U Manuel utilisateur

Lumex

Lumex RJ4200A Manuel utilisateur

Rebotec

Rebotec Jumbo Manuel utilisateur

aidapt VP173FC Manuel

Manuels Aide à la mobilité populaires d'autres marques