Aidapt VR202 Manuel

Broadstairs Toilet Frame

VR202 (Free-Standing)

VR203 (Floor Fixed Version)

Fixing and Maintenance Instructions

This ﬁle is available to view and download as a PDF at

www.aidapt.co.uk. Sight impaired customers can use a free

PDF Reader (such as adobe.com/reader) to zoom in and

increase the text size for improved readability.

Fixing and Maintenance Instructions 2

INTRODUCTION

Thank you for deciding to purchase the Broadstairs Toilet Frame from Aidapt. The Broadstairs Toilet

Frame is manufactured from the nest materials and components available, when used correctly it is

designed to give many years of reliable trouble-free service.

Please Note: Always consult with the prescriber/Physiotherapist if you are in any doubt that this

product is suitable for your use.

BEFORE USE

• Carefully remove all packaging. Avoid using any knives of other sharp instruments as this may damage

the surface of the product.

• Check the product for any visible damage, if you see any damage or suspect a fault, do not use your

product as it may compromise your safety, but contact your supplier for support.

CLEANING

All of the product components are manufactured from quality materials. However, it is very important

that you only clean your toilet frame using a non-abrasive cleaner or mild detergent with a soft cloth and

avoid using lime scale remover.

Under no circumstances use any abrasive cleaners or materials on any of the components. Also check

that the cleaner you intend to use is suitable for ABS, Vinyl, Polymer Plastics and Thermo plastic rubbers

and Polyurethane Rubber.

NB. Regular daily cleaning will reduce the build-up of limescale on your product.

Body spillages should be cleaned as and when they occur (giving particular attention to the area where

the frame width is extended), as this will avoid causing rust or corrosion which could damage/weaken

the frame.

Our equipment can be cleaned and or disinfected as per MHRA guidance on decontamination MHRA

DB 2003 (06). This product is suitable for cleaning with moist heat or autoclaving. When using moist

heat the equipment can be held at 81°c for at least one minute to achieve disinfection.

NB. This equipment must be installed by a competent person.

190 kg (30 st) weight limit.

Do not exceed the weight limit stated – doing so could put the user at risk.

Fixing and Maintenance Instructions 3

ADJUSTMENTS TO HEIGHT EXTENSION LEGS

• Remove the ‘E’ clip from the extension leg and extend all four legs evenly to the desired height

ensuring you do not exceed the last punched hole of the extension leg. (See g. 1)

• Once you have achieved the desired height; reinstall the ‘E’ clip, ensuring that it has passed through

the extension leg and is tting neatly and snug around the outside leg. (See g. 2).

• Never install the extension legs unevenly or slanting, this will compromise the safety of the user.

CORRECT

INCORRECT!!

ADJUSTMENTS TO WIDTH EXTENSION BARS

• Remove the ‘E’ clip from the extension bar and extend the frame to the desired width (See g. 1)

• Once you have achieved the desired width, reinstall the ‘E’ clip, ensuring that it has passed through the

extension bar and is tting neatly and snug around the outside leg. (See g. 2).

• Ensure the e-clip has passed through BOTH the external tube and the internal extension bar

(See g. 3) Do not use if the e-clip is only through the internal extension bar (See g. 4)

E-clip has securely passed through

external tube and internal extension

bar

E-clip has ONLY passed through the

internal extension bar and NOT the

external tube! DO NOT USE!

g. 3

g. 4

Fixing and Maintenance Instructions 4

FITTING OF THE FLOOR FIXING KIT

(OPTIONAL EXTRA SUPPLIED WHEN ORDERING VR203)

Remove the ‘E’ clips from the extension legs and completely remove the extension legs from the frame.

Insert the supplied oor xing legs. Select the desired height setting and insert the ‘E’ clips to x the

legs in place. Position the frame into the desired place around the toilet and use appropriate screws (not

supplied) to secure the xing plates to the oor.

REISSUE

If you reissue or are about to reissue this product, please thoroughly check all components for their

safety.

This includes:

• Proper height adjustment

• Tightness of all nuts/ bolts/castors

• Other screw in/ bolt in/ push in components.

• Also check all upholstery for security, splits, etc.

• Width and leg extensions

If in any doubt, please do not issue or use, but immediately contact your supplier for service

support.

CARE & MAINTENANCE

Please make a safety check of the product at regular intervals or if you have any concerns. Please pay

particular attention to the width and leg extensions.

IMPORTANT INFORMATION

The information given in this instruction booklet must not be taken as forming part of or establishing any

contractual or other commitment by Aidapt Bathrooms Limited, Aidapt (Wales) Ltd or its agents or its

subsidiaries and no warranty or representation concerning the information is given.

Please exercise common sense and do not take any unnecessary risks when using this product; as the

user you must accept liability for safety when using the product.

Please do not hesitate to contact the person who issued this product to you or the manufacturer (detailed

below) if you have any queries concerning the assembly/use of your product.

Aidapt Bathrooms Ltd, Lancots Lane, Sutton Oak, St Helens, WA9 3EX

Telephone: +44 (0) 1744 745 020 • Fax: +44 (0) 1744 745 001 •

Web: www.aidapt.com

Email: [email protected]

Autres manuels pour VR202

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels aidapt Aide à la mobilité

aidapt

aidapt VM937 Manuel de programmation

aidapt

aidapt VP176X Manuel de programmation

aidapt

aidapt VP155B Manuel utilisateur

aidapt

aidapt VP119 Manuel

aidapt

aidapt VP159AA Manuel utilisateur

aidapt

aidapt VY470B Manuel

aidapt

aidapt VR165 Manuel

aidapt

aidapt VM946 Manuel de programmation

aidapt

aidapt VP155KB Manuel de programmation

aidapt

aidapt Transfer Turntable Manuel de programmation

aidapt

aidapt VP159AA Manuel

aidapt

aidapt VM923 Manuel de programmation

aidapt

aidapt VA140 Manuel

aidapt

aidapt VM903 Manuel de programmation

aidapt

aidapt VY429 Manuel

aidapt

aidapt VY441 Manuel utilisateur

aidapt

aidapt VM904 Manuel de programmation

aidapt

aidapt VR160X Manuel

aidapt

aidapt VP174RS Manuel

aidapt

aidapt VP155SA Manuel de programmation

aidapt

aidapt Strolley Manuel

aidapt

aidapt VM918 Manuel de programmation

aidapt

aidapt VM862 Manuel

aidapt

aidapt VB541 Manuel de programmation

Manuels Aide à la mobilité populaires d'autres marques

Alber

Alber Scalamobil iQ Manuel utilisateur

Ferno

Ferno CCT-PX Manuel utilisateur

HEPRO

HEPRO Gripo Manuel utilisateur

Otto Bock

Otto Bock Pheon 3R62 Manuel utilisateur

NRS Healthcare

NRS Healthcare M11090 Manuel utilisateur

Medline

Medline MDS86835DSHEC Guide d'installation

Guldmann

Guldmann Twin Turner II Manuel utilisateur

Drive

Drive ROOMBA Manuel utilisateur

Gate

Gate Balder Manuel utilisateur

Decon wheel

Decon wheel TNS Notos Manuel utilisateur

ExoAtlet

ExoAtlet ExoAtlet-II Manuel utilisateur

Invacare

Invacare Storm Series Mode d’emploi

Rhythm Healthcare

Rhythm Healthcare B3800F Manuel utilisateur

AMF-BRUNS

AMF-BRUNS PROTEKTOR Manuel utilisateur

Drive DeVilbiss Healthcare

Drive DeVilbiss Healthcare OTTER Manuel utilisateur

Rhythm Healthcare

Rhythm Healthcare C500U Manuel utilisateur

Lumex

Lumex RJ4200A Manuel utilisateur

Rebotec

Rebotec Jumbo Manuel utilisateur

aidapt VR202 Manuel

Manuels Aide à la mobilité populaires d'autres marques