Advantech WISE-4671 Manuel d'installation et d'exploitation
WISE-4671 Startup Manual 1
Thank you for purchasing the WISE-4671 module. This
quick start guide is intended to help you with deploying the
module. It includes information on the power requirements
and application wiring. Should you require more instruc-
tions, please refer to the user manual.
The WISE-4671 has two pairs of external power inputs:
1. +Vs and -Vs (for line power or battery recharge)
2. Solar panel+ and solar panel- (for battery recharge)
Both power inputs support a standard industrial unregulated
24 VDC power supply. This series of modules also accept
+10 to +50 VDC power input and 200-mV peak-to-peak
power ripple. The immediate ripple voltage should be
between +10 and +50 VDC.
Solar panel voltage range is between 17-21VDC.
For modules with a lithium-ion battery, please note that the
operating temperature is 0 ~ 60 °C (32~140 °F). For safety
reasons, when the temperature is in the range of 45 ~ 60 °C
(113 ~ 140 °F), the battery can only be recharged to 20%.
WISE-4671
Advanced Industrial Cat.NB1/Cat.M1 Wireless I/O Module
Startup Manual
• 1 x WISE-4671 Wireless Module
• 1 x Waterproof Antenna
• 1 x Mounting Bracket
• 1 x WISE-4671 Startup Manual
• 1 x China RoHS Declaration
Note: One of the below I/O module should be selected
and ordered respectively to be paired with
WISE-4671.
Selected I/O Module to be paired with WISE-4671:
• WISE-S614 4AI/4DI with M12 Connectors
• WISE-S614T 4AI/4DI with Terminal Block
• WISE-S615 4RTD with M12 Connectors
• WISE-S617 2AI/2DI/1DO/1RS-485 with M12 Connectors
• WISE-S617T 2AI/2DI/1DO/1RS-485 with Terminal Block
• WISE-S672 6DI/1RS-485/1RS-485 or RS-232 with M12
Connectors
1. Download and install the USB driver.
2. Download and install WISE Studio from https://sup-
port.advantech.com/support/DownloadSRDetail_New.
aspx?SR_ID=1-1MJSJKX&Doc_Source=Download.
3. To power the module, connect a DC power source to
the +Vs and -Vs pins. The device can also be powered
by internal recharageable battery by turning the battery
switch on the side of the device.
4. Connect the module to your computer via the micro-
USB port.
5. Open WISE Studio and click Go To Conguration.
Overview
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
For technical support and service:
http://support.advantech.com/
This startup manual is for WISE-4671 Series.
Part No. 2043467102
Printed in Taiwan
Edition 3
October 2020
Input Power Requirements
Battery Power Quick Start for WISE-4671 Series
Packaging List
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: +49 911/ 957 606 00 — E-Mail: [email protected] — www.lucom.de
www.lucom.de
2 WISE-4671 Startup Manual
6. Press ConnecttolinkWISE-4671andyouwillseethewebcongurationpage.
7. UsewebcongurationinWISEUtilityorpressOpen in Browsertoopenthewebcongurationinanybrowser(Google
Chrome is recommended).
8. Click Information to check whether your module has successfully connected to a Cat.NB1/Cat.M1 network.
Pin Assignment of WISE-S600 I/O Module with M12 Connectors
M12
Connector
Model Name
M12 Cable WISE-S672 WISE-S614 WISE-S615 WISE-S617
Pin Number
PCB P/N 4Pin : 1700028162-01
8Pin : 1700028163-01 19A3DC7200-01 19A3DB1402-01 19A3DC1500-01 19A3DC1702-01
A
1 White DI 0 DI 0 RTD0+ AI 0+
2 Brown DI 1 DI 1 RTD0- AI 0-
3Green DI 2 DI 2 RTD0 COM +12V Out0
4 Yellow DI 3 DI 3 NC +12VOutGND
5Gray DI 4 NC RTD1+ AI 1+
6 Pink DI 5 NC RTD1- AI 1-
7 Blue NC NC RTD1 COM +12V Out1
8 Red DI COM DI COM NC +12VOutGND
Application Wiring
Quick Start for WISE-4671 Series (Cont.)
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: +49 911/ 957 606 00 — E-Mail: [email protected] — www.lucom.de
www.lucom.de
WISE-4671 Startup Manual 3
M12
Connector
Model Name
M12 Cable WISE-S672 WISE-S614 WISE-S615 WISE-S617
Pin Number
PCB P/N 4Pin : 1700028162-01
8Pin : 1700028163-01 19A3DC7200-01 19A3DB1402-01 19A3DC1500-01 19A3DC1702-01
B
1 White DATA0- AI 0+ RTD2+ DI 0
2 Brown DATA0+ AI 0- RTD2- DI 1
3Green RS-232 TX AI 1+ RTD2 COM DI COM
4 Yellow RS-232 RX AI 1- NC DO 0
5Gray DATA1- AI 2+ RTD3+ DOGND
6 Pink DATA1+ AI 2- RTD3- RS-485 D+
7 Blue NC AI 3+ RTD3 COM RS-485 D-
8 Red RS-232GND AI 3- NC RS-485GND
PWR
1 Brown +VS +VS +VS +VS
2 White -VS -VS -VS -VS
3 Blue SP+ SP+ SP+ SP+
4 Black NC SP- SP- SP-
Application Wiring of WISE-S600 Series I/O Module with M12 Connectors
WISE-S614 (4AI/4DI)
Application Wiring (Cont.)
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: +49 911/ 957 606 00 — E-Mail: [email protected] — www.lucom.de
www.lucom.de
4 WISE-4671 Startup Manual
WISE-S615 I/O Application Wiring
WISE-S617 (2AI/2DI/1DO/1RS-485)
Solar Panel V-
Solar Panel V+
RTD
PT100 (385) : -200~+600°C
PT100 (392) : -200~+600°C
PT1000 : -40 ~+160°C
Pin Name Color of Cable
Wiring Pin Number Connector
RTD 0+ White 1
A
RTD 0- Brown 2
COM 0 Green 3
NC Yellow 4
RTD 1+ Gray 5
RTD 1- Pink 6
COM 1 Blue 7
NC Red 8
RTD 2+ White 1
B
RTD 2- Brown 2
COM 2 Green 3
NC Yellow 4
RTD 3+ Gray 5
RTD 3- Pink 6
COM 3 Blue 7
NC Red 8
+Vs Brown 1
PWR
-Vs White 2
Solar Panel V+ Blue 3
Solar Panel V- Black 4
Application Wiring (Cont.)
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: +49 911/ 957 606 00 — E-Mail: [email protected] — www.lucom.de
www.lucom.de
WISE-4671 Startup Manual 5
Application Wiring (Cont.)
WISE-S672 (6DI/1RS-485/1RS-485 or 1RS-232)
Application Wiring of WISE-S600T Series I/O Module with Terminal Block
WISE-S614T (4AI/4DI)
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: +49 911/ 957 606 00 — E-Mail: [email protected] — www.lucom.de
www.lucom.de
6 WISE-4671 Startup Manual
WISE-S617T (2AI/2DI/1DO/1RS-485)
• Install the CP210x USB to UART controller driver.
• USB does not power the module.
Application Wiring (Cont.)
Notes
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: +49 911/ 957 606 00 — E-Mail: [email protected] — www.lucom.de
www.lucom.de
WISE-4671 Startup Manual 7
Advantech’sWISE-4671NB-IoT/LTE-MwirelessI/OmodulecanbeconguredtosupporteitherNB-IoTorLTE-Musingthe
WISEStudioutilityviaaUSBport.Foradvancedindustrialapplications,WISE-4671canbeequippedwithoptionalGPS,a
solar rechargeable battery, and an IP65-rated enclosure to protect from water and dust ingress. The WISE-4671 wireless I/O
modulefeaturesanintelligentmodulardesignthatsupportsvariousI/Ocongurationsaccordingtousagerequirements.This
allows users to easily integrate their desired I/O module (WISE-S672, WISE-S614 etc.) with the WISE-4671 module.
There are three ways to power up the WISE module, battery power, solar panel power and line power.
OpentherubbercoveronthesideoftheWISEmoduleandyoucanseeabatteryswitchforturningon/othebatterypower.
For solar power, it is not only to recharge the battery but also to power up the device.
Refer to the application wiring section for solar panel power and line power pin assignment.
Also,thereisaUSBportforthedevicecongurationviaWISEStudiobutnotethattheWISEdevicecannotbepoweredvia
USB.
Note: TurnothedevicewhenswappingtheI/Omoduletoavoidhardwaredamage.
Module Conguration
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: +49 911/ 957 606 00 — E-Mail: [email protected] — www.lucom.de
www.lucom.de
8 WISE-4671 Startup Manual
The LED indicators are described as follows:
LED Color Indication Behavior
Upper
Board
(RF)
Status Green Blink
2 Hz No NB-IoT network connection.
0.5 Hz NB-IoT network connection is successfully initialized.
RF RX Green
On Receiving data via the NB-IoT network.
O Idle
RF TX Yellow
On Sending data via the NB-IoT network.
O Idle
Error Red
Blink
2 Hz
a. RF related error with 4th (Full) signal strength LED 2 Hz blinking.
b.I/Orelatederrorwith3rd(Good)signalstrengthLED2Hzblink-
ing.
0.5 Hz a. Battery related Error.b. Low battery voltage (v <= 20%)
O No error
Signal
Strength Green
ON
(normal)
• 4 ON: Full signal (RSRP Index > 56)(–85 dBm < RSRP)
• 3ON:Goodsignal(RSSPIndex>=47)(–94dBm≤RSRP≤–85
dBm)
• 2ON:Okaysignal(RSRPIndex>=37)(–104dBm≤RSRP≤–95
dBm)
• 1ON:Poorsignal(RSRPIndex>=0)(RSRP≤–105dBm)
• ALL OFF: No signal (Not registered to network, or registration
denied)
ON
(if Press Mem-
brane Button)
Main battery remain capacity
• All OFF – v <= 20 %
• 1 ON – 20% < v < 40%
• 2 ON – 40% <= v < 60%
• 3 ON – 60% <= v < 80%
• 4 ON – v >= 80%
Led Indicators
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: +49 911/ 957 606 00 — E-Mail: [email protected] — www.lucom.de
www.lucom.de
Autres manuels pour WISE-4671
1
Table des matières
Autres manuels Advantech Unité de contrôle
Advantech
Advantech PCM-3116 Manuel d'installation et d'exploitation
Advantech
Advantech MIO-6254 Manuel d'installation et d'exploitation
Advantech
Advantech MIO-6255 Manuel d'installation et d'exploitation
Advantech
Advantech USB-4711A Manuel utilisateur
Advantech
Advantech PCM-3680 Manuel d'installation et d'exploitation
Advantech
Advantech AMAX-4800 Series Manuel utilisateur
Advantech
Advantech WISE-1510 Manuel utilisateur
Advantech
Advantech iDAQ-817 Manuel utilisateur
Advantech
Advantech ADAM-5240 Manuel utilisateur
Advantech
Advantech PCM-233A Manuel d'installation et d'exploitation
Advantech
Advantech AIW-357 DK-G1P Manuel utilisateur
Advantech
Advantech SOM-7569 Manuel utilisateur
Advantech
Advantech MIO-3121 Manuel d'installation et d'exploitation
Advantech
Advantech USB-4716 Manuel utilisateur
Advantech
Advantech PCM-2610B Manuel d'installation et d'exploitation
Advantech
Advantech MIO-6250 MIO/160 Manuel d'installation et d'exploitation
Advantech
Advantech PCM-233A Manuel d'installation et d'exploitation
Advantech
Advantech MIC-3376 Manuel utilisateur
Advantech
Advantech ADAM-2000 Series Manuel utilisateur
Advantech
Advantech WISE-1510 Manuel utilisateur
Manuels Unité de contrôle populaires d'autres marques
Festo
Festo Compact Performance CP-FB6-E Manuel de la liste des pièces
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur
JS Automation
JS Automation MPC3034A Manuel utilisateur
JAUDT
JAUDT SW GII 6406 Series Guide rapide
Spektrum
Spektrum Air Module System Manuel utilisateur
BOC Edwards
BOC Edwards Q Series Manuel utilisateur
