ADLINK Technology PCIe-U30 Series Manuel utilisateur

Leading EDGE COMPUTING

PCIe-U30x Series

4/8/12-ch PCI Express® x4 Gen3

USB3 Vision Top Performing Frame Grabbers

Function Library Reference

Manual Rev.: .0

Revision ate: Oct. 22, 20 9

Part No: 50- 269- 000

ii Revision History

Leading EDGE COMPUTING

Revision History

Revision Release ate escription of Change(s)

.00 Oct. 22, 20 9 Initial release

Preface iii

PCIe-U30x Series

Preface

This document contains proprietary information protected by copy-

right. All rights are reserved. No part of this manual may be repro-

duced by any mechanical, electronic, or other means in any form

without prior written permission of the manufacturer.

isclaimer

The information in this document is subject to change without prior

notice in order to improve reliability, design, and function and does

not represent a commitment on the part of the manufacturer.

In no event will the manufacturer be liable for direct, indirect,

special, incidental, or consequential damages arising out of the

use or inability to use the product or documentation, even if

advised of the possibility of such damages.

ADLINK is committed to fulfill its social responsi-

bility to global environmental preservation

through compliance with the European Union's

Restriction of Hazardous Substances (RoHS)

directive and Waste Electrical and Electronic

Equipment (WEEE) directive. Environmental

protection is a top priority for ADLINK. We have

enforced measures to ensure that our products,

manufacturing processes, components, and raw

materials have as little impact on the environment as possible.

When products are at their end of life, our customers are encour-

aged to dispose of them in accordance with the product disposal

and/or recovery programs prescribed by their nation or company.

Battery Labels (for products with battery)

ᘄ㟁ụㄳᅇᨲ

iv Preface

Leading EDGE COMPUTING

California Proposition 65 Warning

WARNING: This product can expose you to chemicals

including acrylamide, arsenic, benzene, cadmium, Tris

( ,3-dichloro-2-propyl)phosphate (TDCPP), ,4-Dioxane,

formaldehyde, lead, DEHP, styrene, DINP, BBP, PVC, and vinyl

materials, which are known to the State of California to cause can-

cer, and acrylamide, benzene, cadmium, lead, mercury, phthal-

ates, toluene, DEHP, DIDP, DnHP, DBP, BBP, PVC, and vinyl

materials, which are known to the State of California to cause birth

defects or other reproductive harm. For more information go to

www.P65Warnings.ca.gov.

Trademarks

Product names mentioned herein are used for identification pur-

poses only and may be trademarks and/or registered trademarks

of their respective companies.

Conventions

Take note of the following conventions used throughout this

manual to make sure that users perform certain tasks and

instructions properly.

NOTE:

Additional information, aids, and tips that help users perform

tasks.

CAUTION:

Information to prevent minor physical injury, component dam-

age, data loss, and/or program corruption when trying to com-

plete a task.

WARNING:

Information to prevent serious physical injury, component

damage, data loss, and/or program corruption when trying to

complete a specific task.

Table of Contents v

PCIe-U30x Series

Table of Contents

Revision History...................................................................... ii

Preface.................................................................................... iii

1 Introduction ........................................................................ 1

. Setting Up the Build Environment........................................

2 Function Library................................................................. 3

2. List of Functions................................................................... 3

2.2 Function Library ................................................................... 3

2.2. Device Control Functions ........................................... 3

2.2.2 Power Management Functions ................................... 9

Important Safety Instructions .............................................. 13

Getting Service...................................................................... 15

vi Table of Contents

Leading EDGE COMPUTING

This page intentionally left blank.

Introduction 1

PCIe-U30x Series

1 Introduction

The PCIe-U30x series Function Library Reference provides nec-

essary API details, where developers can develop power control

applications and get product information in C/C++, C#/VB.Net.

1.1 Setting Up the Build Environment

All header files, DLL and library filesare located in:

\A LINK\U3 Series\Include

Type File escription Required by

Include

SmartU3.h Header file required for all C/C++

applications

All applications

using APIs

SmartU3.vb Function definitions required for all

VB.Net applications

SmartU3.cs Function definitions required for all

C# applications

DLL SmartU3.dll Dynamic link library files required

for all applications

Library SmartU3.lib

SmartU3x64.lib

Exports API function definitions,

required for all Visual C/C++

applications

2 Introduction

Leading EDGE COMPUTING

This page intentionally left blank.

unction Library 3

PCIe-U30x Series

2 Function Library

2.1 List of Functions

2.2 Function Library

2.2.1 evice Control Functions

SmartU3_Register_Card

Initializes a specified device.This function should be called before

other functions except those with no Number parameter.

Syntax

C/C++

short SmartU3_Register_Card (unsigned short

card_num)

Parameter(s)

Card_num:

Indicates the number of devices with the first card num-

bered 0, the second card numbered , etc.

Category Function

Device

Control

SmartU3_Register_Card

SmartU3_Release_Card

SmartU3_Get_ID

SmartU3_Get_MCUVersion

SmartU3_Get_Ports

SmartU3_Get_ProductPN

SmartU3_Get_ProductSN

Power

Management

SmartU3_Power_Enable

SmartU3_Get_Power_Enable

4 unction Library

Leading EDGE COMPUTING

Return Code

No error occurs if the return value >= 0, and if a negative value,

as follows

-3 The count of calling SmartU3_Register_Card

must be less than 32

-13 Dri er is not found or there is no card

SmartU3_Release_Card

Closes the device and releases all allocated resources. This func-

tion should be called before terminating the application.

Syntax

C/C++

short SmartU3_Release_Card (unsigned short

wCardNumber)

Parameter(s)

wCardNumber:

Indicates the value returned from calling

SmartU3_Register_Card.

Return Code

No error occurs if the return value >= 0, and if a negative value,

as follows

-2 In alid wCardNumber parameter. wCardNumber

is less than 32

SmartU3_Get_I

Initializes the hardware and software states of a PCI-bus data

acquisition card, then returns a numeric card ID that corresponds

to the initialized card. Register_Card must be called before any

other functions can be called for a particular card. The function ini-

tializes the card and variables internal to the library. Because PCI-

bus data acquisition cards meet plug-and-play specifications, the

Table des matières

Autres manuels ADLINK Technology Matériel informatique

ADLINK Technology

ADLINK Technology MXM-P1000 Manuel utilisateur

ADLINK Technology

ADLINK Technology LEC-BTS Manuel d'utilisation et d'entretien

ADLINK Technology

ADLINK Technology COM Express Express-BL Manuel utilisateur

ADLINK Technology

ADLINK Technology VPX3000 Series Manuel utilisateur

ADLINK Technology

ADLINK Technology cPCI-9116 Manuel utilisateur

ADLINK Technology

ADLINK Technology NuDAQ PCI-9222 Manuel utilisateur

ADLINK Technology

ADLINK Technology VPX3-TL Series Manuel utilisateur

ADLINK Technology

ADLINK Technology ETX-BT Manuel utilisateur

ADLINK Technology

ADLINK Technology EBP-13E4 Manuel utilisateur

ADLINK Technology

ADLINK Technology DMI-1210 Manuel utilisateur

ADLINK Technology

ADLINK Technology EBP-13E2 Manuel utilisateur

ADLINK Technology

ADLINK Technology NuPRO-A331 Manuel utilisateur

ADLINK Technology

ADLINK Technology EGX-MXM-A1000 Manuel utilisateur

ADLINK Technology

ADLINK Technology EOS-1200 Manuel utilisateur

ADLINK Technology

ADLINK Technology arm AMPERE COM-HPC-ALT Manuel utilisateur

ADLINK Technology

ADLINK Technology cPCI-6530 Series Manuel utilisateur

ADLINK Technology

ADLINK Technology cPCI-7300A Manuel utilisateur

ADLINK Technology

ADLINK Technology SMARC LEC-MTK-I1200 Manuel utilisateur

ADLINK Technology

ADLINK Technology nanoX-AL Manuel utilisateur

ADLINK Technology

ADLINK Technology NuIPC cPCI-3500A Series Manuel utilisateur

ADLINK Technology

ADLINK Technology NuPRO-840 DV Manuel utilisateur

ADLINK Technology

ADLINK Technology VPX3020 Series Manuel utilisateur

ADLINK Technology

ADLINK Technology PCI-8136 Manuel utilisateur

ADLINK Technology

ADLINK Technology cPCI-8586 Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur