ADLINK Technology 10GbE BASE-T Manuel utilisateur
Leading EDGE COMPUTING
10GbE BASE-T Card
User’s Manual
COM Express Type 7 10GBASE-T Network Adapter Card
Manual Rev.: 1.0
Revision Date: July 7, 2017
Part Number: 50-1J091-1000
ii Preface
Preface
Copyright
Copyright 2017 ADLINK Technology, Inc. This document contains proprietary information protected by copyright.
All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in
any form without prior written permission of the manufacturer.
Disclaimer
The information in this document is subject to change without prior notice in order to improve reliability, design, and
function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer
be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use
the product or documentation, even if advised of the possibility of such damages.
Environmental Responsibility
ADLINK is committed to fulfill its social responsibility to global environmental preservation through compliance with
the European Union's Restriction of Hazardous Substances (RoHS) directive and Waste Electrical and Electronic
Equipment (WEEE) directive. Environmental protection is a top priority for ADLINK. We have enforced measures to
ensure that our products, manufacturing processes, components, and raw materials have as little impact on the
environment as possible. When products are at their end of life, our customers are encouraged to dispose of them
in accordance with the product disposal and/or recovery programs prescribed by their nation or company.
Trademarks
Product names mentioned herein are used for identification purposes only and may be trademarks and/or
registered trademarks of their respective companies.
Revision History
Revision Description Date By
1.0 Initial release 2017-07-07 JC
10GbE BASE-T Card
Preface iii
Table of Contents
Preface................................................................................................................................ii
List of Figures ...................................................................................................................iv
List of Tables......................................................................................................................v
1. Introduction................................................................................................................1
2. Specifications............................................................................................................3
2.1. Interface......................................................................................................................3
2.2. 10GbE PHY................................................................................................................3
2.3. Dimensions.................................................................................................................3
2.4. Operating Temperatures.............................................................................................3
2.5. Specification Compliance ...........................................................................................3
2.6. Functional Diagram.....................................................................................................4
2.7. Mechanical Drawing ...................................................................................................5
3. Pinouts and Signal Descriptions..............................................................................7
3.1. Input Interface Definitions...........................................................................................7
4. Module Interfaces and Configuration ......................................................................9
4.1. 10GbE BASE-T Card Layout......................................................................................9
4.2. 10GbE Adapter Card Installation..............................................................................10
4.3. LED Indicators..........................................................................................................11
Getting Service.................................................................................................................12
iv Preface
List of Figures
Figure 1: 10GbE BASE-T Card Functional Block Diagram......................................................................4
Figure 2: 10GbE BASE-T Card Mechanical Drawing...............................................................................5
Figure 3: 10GbE BASE-T Card Layout ....................................................................................................9
Figure 4: 10GbE Adapter Card Installed on Express-BASE7 with Type 7 COM Express Module....... 10
10GbE BASE-T Card
Preface v
List of Tables
Table 1: 10GbE BASE-T Card Pin Definitions .........................................................................................7
Table 2: LED Descriptions..................................................................................................................... 11
vi Preface
This page intentionally left blank.
10GbE BASE-T Card
Introduction 1
1. Introduction
The ADLINK 10GbE BASE-T Card is a 10GbE copper network adapter card that delivers fast 10Gbps network
access. It converts up to four 10GBASE-KR interfaces & related sideband signals to four 10GbE copper interfaces
(10GBASE-T signals) through 10GbE copper PHY.
The 10GbE BASE-T Card can only be used on products that are PICMG COM Express Type 7 (COM.0 Rev. 3.0)
compliant.
By using the 10GbE BASE-T Card with an Express-BASE7 reference carrier board and COM Express Type7
module (with 10GbE controller supporting copper mode), customers can quickly emulate the functionality of their
end product for software development and hardware verification. Applications include entry level cloud storage
platforms and communications servers.
2 Introduction
This page intentionally left blank.
10GbE BASE-T Card
Specifications 3
2. Specifications
2.1. Interface
Input Up to four 10GBASE-KR & related sideband signals from COM Express Type7 module
through 164-pin edge connector (PCIe x16 slot PCIEKR on Express-BASE7)
Output Up to four 10G copper signals (10GBASE-T)
2.2. 10GbE PHY
PHY Intel® Ethernet Connection X557-AT2 (two 10GbE ports, default BOM configuration)
Converts 10GBASE-KR and sideband signals to 10GBASE-T signals
Note: Four 10GbE ports optionally supported by project basis with 2nd copper PHY on
10GbE BASE-T card.
EEPROM Dedicated EEPROM for PHY firmware
2.3. Dimensions
•168 mm x 107 mm (PCB only, including edge connector)
2.4. Operating Temperatures
Standard Operating
Temperature 0°C to +60°C
2.5. Specification Compliance
zPICMG COM.0: Rev 3.0 Type 7
4 Specifications
2.6. Functional Diagram
164-pin Edge Connector
Figure 1: 10GbE BASE-T Card Functional Block Diagram
Table des matières
Autres manuels ADLINK Technology Matériel informatique
ADLINK Technology
ADLINK Technology cPCI-6525 Manuel utilisateur
ADLINK Technology
ADLINK Technology intel COM Express Express-TL Manuel utilisateur
ADLINK Technology
ADLINK Technology 6216-GL Series Manuel utilisateur
ADLINK Technology
ADLINK Technology COM-HPC Manuel utilisateur
ADLINK Technology
ADLINK Technology cPCI-9116 Manuel utilisateur
ADLINK Technology
ADLINK Technology DMI-1210 Manuel utilisateur
ADLINK Technology
ADLINK Technology NuDAQ PCI-9222 Manuel utilisateur
ADLINK Technology
ADLINK Technology cPCI-7300A Manuel utilisateur
ADLINK Technology
ADLINK Technology NuDAQ ACL-8216 Manuel utilisateur
ADLINK Technology
ADLINK Technology aTCA-80606PA Manuel utilisateur
ADLINK Technology
ADLINK Technology PXES-2301 Manuel utilisateur
ADLINK Technology
ADLINK Technology AmITX-CF-I Manuel utilisateur
ADLINK Technology
ADLINK Technology EC-8560 Manuel utilisateur
ADLINK Technology
ADLINK Technology EPS-4008 Manuel utilisateur
ADLINK Technology
ADLINK Technology PCIe-U30 Series Manuel utilisateur
ADLINK Technology
ADLINK Technology PCIe-ACC100 Manuel utilisateur
ADLINK Technology
ADLINK Technology COM Express cExpress-BL Manuel utilisateur
ADLINK Technology
ADLINK Technology VPX3000 Series Manuel utilisateur
ADLINK Technology
ADLINK Technology cPCI-3520 Series Manuel utilisateur
ADLINK Technology
ADLINK Technology EBP-13E2 Manuel utilisateur
Manuels Matériel informatique populaires d'autres marques
EMC2
EMC2 VNX Series Manuel du propriétaire
Panasonic
Panasonic DV0PM20105 Manuel utilisateur
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuel utilisateur
Raidon
Raidon iT2300 Manuel utilisateur
National Instruments
National Instruments PXI-8186 Manuel utilisateur
