ACME Thunderbreaker Manuel utilisateur

CONTENTS

1. Safety Instructions ..................................................................................................2

2. Technical Specifications ..........................................................................................4

3. In Stallation and Splicing.........................................................................................6

4. Description..............................................................................................................8

4.1 Control Ption .....................................................................................................8

5. How To Set The Unit................................................................................................9

5.1 Main Function....................................................................................................9

6. Control By Universal DMX Controller ....................................................................18

6.1 DMX512 Connection ........................................................................................18

6.2 Address Setting ...............................................................................................19

6.3 DMX512 Configuration....................................................................................20

7. Troubleshooting ....................................................................................................50

8. Fixture Cleaning .....................................................................................................50

1. Safety Instructions

WARNING

Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that

they also receive this instruction manual.

Important:

Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not

accept liability for any resulting defects or problems.

Unpack and check carefully that there is no transportation damage before using the unit.

The equipment is suitable for wet/indoor use.

DO install and operate by qualified operator.

DO NOT allow children to operate the fixture.

Use safety chain when fixing the unit. Handle the unit by carrying its base instead of head only.

The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent

surfaces.

Be sure that no ventilation slots are blocked, otherwise the unit will be overheated.

Before operating, ensure that the voltage and frequency of power supply match the power

requirements of the unit.

It’s important to ground the yellow/green conductor to earth in order to avoid electric shock.

Minimum ambient temperature TA: 0℃. Maximum ambient temperature TA: 40℃.

DO NOT connect the device to any dimmer pack.

Make sure there are no flammable materials close to the unit while operating to avoid fire hazard.

Examine the power wires carefully; replace them immediately if there is any damage.



DO NOT operate in dirty or dusty environment, do clean fixtures regularly.

DO NOT touch any wire during operation as there might be a hazard of electric shock.

Avoid power wires together twist other cables.

The minimum distance between light output and the illuminated surface must be more than 0.5

meters.

Please read the instruction carefully which includes important information about

the installation, usage and maintenance.

Unit’s surface temperature may reach up to 75℃.DO NOT touch the housing bare-handed

during its operation.

In the event of serious operating problem, stop using the unit immediately.

Never turn on and off the unit time after time.

The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly damaged.

DO NOT open the unit as there are no user serviceable parts inside.

Never try to repair the unit by yourself. Repairs carried out by unskilled people can lead to damage

or malfunction. Please contact the nearest authorized technical assistance center if needed.

Disconnect the mains power if the fixture is has not been used for a long time.

DO use the original packing materials before transporting it again.

DO NOT look directly at the light while the Luminaires is on.

DO NOT start on the unit without Luminaires enclosure or when housing is damaged.

Installation:

The fixture should be mounted via its Omega Quick Release Clamp bracket. Always ensure that the unit

is firmly fixed to avoid vibration and slipping while operating and make sure that the structure to which

you are attaching the unit is secure and is able to support a weight of 10 times of the fixtures weight.

Always use a safety cable that can hold 12 times of the weight of the fixture when installing.

The equipment must be installed by professionals. It must be installed in a place where is out of the

reach of people and no one can pass by or under it.

2. Technical Specifications

Power Voltage:

AC 100~240V, 50/60Hz

Power Consumption: 395w

Light Source:

576 x 0.8W RGBW LED

Beam Angle:

110°

Dimmer/Shutter:

Smooth dimming from 0-100%; outstanding strobe effect with variable speed

Control:

DMX Channel: 6+/11+/12+/13A+/13B+/17+/21A+/21B+/29+/37+/41+/53+ Channels

Protocols: DMX512, RDM

Firmware Upgrade via DMX link or USB disk

Construction:

Display: Color display

Data In/Out: 3-pin (5-pin XLR is optional)

Power In/Out: Power Connector in/out

Protection Rating: IPX4

Number of connected machines:

Maximum number of connected DMX machines: 32

Maximum number of power supply units: 120V, 60Hz: 4 units

230V, 50Hz: 8 units

Features:

• 144 zones can be controlled individually

• Black shell, no traces of screws

• Excellent, powerful and high output strobe effect

• The head and base are equipped with handles for easy carrying and transportation

• Can be spliced with each other or with THUNDER series lamps

Dimension/Weight:

503 x 183 x 318mm, 10.5kgs

19.8" x 7.2" x 12.5"in, 23.1lbs

3.Installation and splicing

The lamp should be fixed on the bracket with screws. Make sure that the installation is firm to prevent

vibration and slipping during operation. Also make sure that the brackets for the fixtures are stable and

can support more than 10 times the weight of the equipment. At the same time, when installing the

equipment, use a safety rope that can support 12 times the weight of the product.

The equipment must be installed by professionals. The equipment should be installed in a place where

the human body cannot be touched, and there will be no pedestrians passing by or sitting.

The installation height of the lamp is between 0~30M.

Installation method of single adjustable angle lamp hanger:

Installation method of lamp hanger:

How to install the lamp bolt:

The assembly method between the two lamps:

：Installation method of lamp hanger (optional):

The splicing method of multiple

lamps：

Warning: Up to 7 units can be spliced in the vertical direction

4.Description

4.1Control Panel

3 42

7 8

1. DISPLAY:To show the various menus and the selected function

2. POWER IN(POWERCON Version):

To connect to supply power

3. POWER OUT(POWERCON Version):

To connect to the next fixture

4. Button:

To enter into move backward or leave the menu

To go backward to move up in the menu

DOWN

To go forward to move down in the menu

ENTER

To perform the desired functions

5. DMX IN:

DMX512 link, use 3-pin XLR cable to link the unit and DMX controller (5-pin XLR is optional)

6. DMX OUT:

DMX 512 operation, use 3-pin XLR cable to link the next units (5-pin XLR is optional)

7. Ethernet interface:connect to the network.

8. Ethernet interface: connect to the network.

5.How To Set The Unit

5.1 Main Function

Turn on the unit, press the MENU button into menu mode, and press the UP/DOWN button until

the required function is shown on the monitor. Select the function by the ENTER button. Use the

UP/DOWN button to choose the submenu, press the ENTER button to store and automatically

return to the last menu. Press the MENU button or let the unit idle One minuteto exit menu mode.

The main functions are shown below:

Table des matières

Autres manuels ACME Équipement d'éclairage

ACME

ACME Xperior 1500SZ Manuel utilisateur

ACME

ACME Neozone Manuel utilisateur

ACME

ACME CM-150 PAGEANT 150 Manuel utilisateur

ACME

ACME Ozone 3 Manuel utilisateur

ACME

ACME ICARUS 620 Manuel utilisateur

ACME

ACME LED-WAV-10W Manuel utilisateur

ACME

ACME COMET Manuel utilisateur

ACME

ACME Xperior 700SZ Spot Manuel utilisateur

ACME

ACME LED-HC101 II Manuel utilisateur

ACME

ACME BF-1500ND B Manuel utilisateur

ACME

ACME LED-256D-10W Manuel utilisateur

ACME

ACME FLANDINA 22 IP Manuel utilisateur

ACME

ACME V Inground VI-10QW Manuel utilisateur

ACME

ACME LED-245/2 Manuel utilisateur

ACME

ACME XP-5000WZ Manuel utilisateur

ACME

ACME XP-280 BS Manuel utilisateur

ACME

ACME Thunder Manuel utilisateur

ACME

ACME Spartan Hybrid C Manuel utilisateur

ACME

ACME BW-54-10FC II RL Manuel utilisateur

ACME

ACME ENERGY SPOT XA-400 SPOT Manuel utilisateur

ACME

ACME IP Cabin AR-01 Manuel utilisateur

ACME

ACME LED-212RGB Manuel utilisateur

ACME

ACME DMX512 Dynamic Scan Manuel utilisateur

ACME

ACME ASTRO LED-256D Manuel utilisateur

Manuels Équipement d'éclairage populaires d'autres marques

Brizo

Brizo 8SP-MU-4 Manuel utilisateur

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuel utilisateur

IKEA

IKEA BJÖRKSPIREA Manuel utilisateur

Laserworld

Laserworld Evolution Series ES-400RGB Manuel utilisateur

Alien

Alien RG STAR Manuel utilisateur

EuroLite

EuroLite LED B-40 Manuel utilisateur

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuel utilisateur

Commercial Electric

Commercial Electric 54568141 Manuel utilisateur

CREE LIGHTING

CREE LIGHTING 304 Series Manuel utilisateur

Goobay

Goobay 49867 Manuel utilisateur

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuel utilisateur

Alkalite

Alkalite Krypton KT-81 Manuel utilisateur

Clas Ohlson

Clas Ohlson GU10 Manuel utilisateur

DTS

DTS DELTA 10 F Manuel utilisateur

ring

ring Solar Steplight Manuel utilisateur

One Stop Gardens

One Stop Gardens 57696 Instructions de montage

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuel utilisateur

SIREM

SIREM Swimeo A2 Manuel utilisateur