3D Systems ProJet 4500 Manuel utilisateur

Quick Reference Guide

ProJet® 4500

3D Professional Printer

3D Systems, Inc.

WHAT’S INSIDE

INTRODUCTION ..............................................................................2

1. YOUR PROJET 4500 AT A GLANCE .....................................................3-4

2. PROJET 4500 USER GUIDE ..........................................................5-6

3. FAMILIARIZATION ...........................................................................7

4. POWER SUPPLY ............................................................................8

5. MATERIAL CARTRIDGE INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

7. WASTE TRAY INSTALLATION AND REMOVAL ...................................................10

8. SETTING UP BUILD TO PRINT ............................................................11-13

9. FINISHING BUILD .......................................................................14-15

10. PRINTER CLEANLINESS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16-19

Congratulations on the purchase of your new ProJet®4500 3D Printer! This Quick Start Guide has the use and safety information infor-

mation you need to get started. Welcome to the 3D creative revolution-let the possibilities begin!

This Quick Start Guide will give you basic instructions on how to get your Projet®4500 3D Printer plugged in and printing so you can start

making creations. For more detailed instructions, please access the ProJet®4500 User Guide available to you on your USB stick.

3D Systems, Inc.

YOUR PROJET 4500 AT A GLANCE

AUpper Real Panel

Lower Rear Panel

Waste Tray Door

Side Panel

Print Chamber Door

Cleaning Station

Control Panel

3D Systems, Inc.

Printing & Cleaning Station

Color Binder Pockets

Fast Axis Debris Separator

Clear Binder Pocket

Vacuum Hose

Service Station

Build Platform

Print Chamber Door

Cleaning Station

Waste Drawer

Fine Cleaning Air Wand

LControl Panel

3D Systems, Inc.

PROJET®4500 USER GUIDE

This quick reference guide will give you basic instructions on how to get your printer ready to successfully build your rst part. For more

detailed instructions, please access the ProJet®4500 User Guide by logging into http://3dscentral.3dsystems.com.

1. Enter your email address and the password that was sent in the conrmation email.

2. Once in 3DSCentral, click on “Products” located at the top menu bar.

3D Systems, Inc.

3. Next, click on ProJet®4500 located on the side bar; your user guides and other valuable printer documents are located here. Click on the document

to open or download a copy to save. Under “Professional Printers” you will nd “ProJet 4500” in the side bar. User guides and other printer documents

are located here.

3D Systems, Inc.

FAMILIARIZATION

The ColorJet Printing (CJP) technology was developed at the Massachusetts Institute of Technology and was commercialized by ZCorpo-

ration. With the acquisition of ZCorporation by 3DS Systems, CJP technology is now one of several professional 3D printing technologies

under the ProJet® brand. The CJP process involves:

Build Chamber

Cleaning Station

Control Panel

DWaste Door & Waste Tray

• Importing a solid 3D model le into the latest version of 3DPrint™ software

• Setting up and positioning your 3D le(s) into the virtual build volume in the 3DPrint software.

• Printing the part(s)

• Curing the part(s) in the build bed

• Gross removal of excess core material from the build area with the vacuum hose

• Fine cleaning of excess core from the part(s) in the cleaning station

• Cleaning and servicing the printer as needed

3D Systems, Inc.

POWER SUPPLY

Verify facility’s electrical service rating before connecting power to the printer.

Facility Electrical Requirement:

Electrical Requirements

Compliance CSA, CB Scheme, CE approvals to UL 60950 Information Technology Equipment. RoHS and

WEEE compliant.

Voltage input RMS 100/115/230 VAC (autoscene) 15/15/9.5A 50/60Hz

Current AC 90-132 (15A) / AC 216 - 264 (11 - 9.5A)

Consumption =< 1800W (80% x 2250) W typical, normal operation, including post processing

1. Plug (A) power cord into power outlet (located at the rear of the print-

er. Then plug into the facility’s power outlet. Switch power on.

3D Systems, Inc.

Electrical Requirements

Compliance CSA, CB Scheme, CE approvals to UL 60950 Information Technology Equipment. RoHS and

WEEE compliant.

Voltage input RMS 100/115/230 VAC (autoscene) 15/15/9.5A 50/60Hz

Current AC 90-132 (15A) / AC 216 - 264 (11 - 9.5A)

Consumption =< 1800W (80% x 2250) W typical, normal operation, including post processing

MATERIAL CARTRIDGE INSTALLATION

CAUTION: Adhere to all personal, and safe handling of materials described in the Material Safety section in the ProJet

4500 User Guide. Always follow MSDS / SDS guidelines and local regulations regarding handling and disposal of regu-

lated materials. Keep disposal records if local law requires.

Insert one (1) CYAN; one (1) MAGENTA; and one (1) YELLOW

material cartridge according to color codes.

Insert one (1) CLEAR binder cartridge.

Color Binder Pockets [C-M-Y]

3D Systems, Inc.

WASTE TRAY INSTALLATION AND REMOVAL

To Install Waste Tray:

Open the waste door and slide waste tray into the waste drawer.

To Remove/Replace Waste Pan

1. Press top left corner of panel to access waste tray.

2. Waste is solid after twenty-four (24) hours. Safely dispose of waste material

(check with local regulations).

OPERATION

To ensure that the printer is functioning properly, a test print is recommended. The test build is provided on the ProJet®4500 USB stick

or available online at .

Autres manuels pour ProJet 4500

Table des matières

Autres manuels 3D Systems Imprimante 3D

3D Systems

3D Systems Figure 4 Standalone Manuel utilisateur

3D Systems

3D Systems ProX DMP320 Manuel utilisateur

3D Systems

3D Systems Cubify CUBEX Duo Manuel de la liste des pièces

3D Systems

3D Systems ProJet SLA 6000 Manuel utilisateur

3D Systems

3D Systems ZPRINTER 150 Manuel utilisateur

3D Systems

3D Systems ProJet 6000 Manuel utilisateur

3D Systems

3D Systems ProJet 4500 Manuel utilisateur

3D Systems

3D Systems ProJet 7000 Manuel utilisateur

3D Systems

3D Systems ProJet 5000 Manuel utilisateur

3D Systems

3D Systems CUBE Manuel utilisateur

3D Systems

3D Systems CubePro 3D Printer Manuel utilisateur

3D Systems

3D Systems CubePro Manuel utilisateur

3D Systems

3D Systems Geomagic Touch Manuel utilisateur

3D Systems

3D Systems FabPro 1000 Manuel

3D Systems

3D Systems Figure 4 Standalone Manuel

3D Systems

3D Systems CUBE Manuel utilisateur

3D Systems

3D Systems ProX SLS 6100 Manuel utilisateur

3D Systems

3D Systems CubePro Instructions de montage

3D Systems

3D Systems ProX 950 Manuel utilisateur

3D Systems

3D Systems ProX SLS 6100 Manuel utilisateur

3D Systems

3D Systems ProX 500 Manuel utilisateur

3D Systems

3D Systems CubePro Manuel utilisateur

3D Systems

3D Systems CUBE Manuel utilisateur

3D Systems

3D Systems ZPRINTER 150 Manuel utilisateur

Manuels Imprimante 3D populaires d'autres marques

Ultimaker

Ultimaker S5 Material Station Manuel utilisateur

EcubMaker

EcubMaker TOYDIY Manuel utilisateur

AnyCubic

AnyCubic Kossel Plus Manuel utilisateur

ReDeTec

ReDeTec ProtoCycler Manuel utilisateur

Kywoo3D

Kywoo3D Tycoon IDEX Manuel utilisateur

CraftBot

CraftBot PLUS PRO Manuel utilisateur

3DGence

3DGence INDUSTRY F340 Manuel utilisateur

HP Jet Fusion 4200 Mode d'emploi

Rokit

Rokit AEP Series Manuel utilisateur

AnkerMake

AnkerMake M5 Manuel utilisateur

DIYElectronics

DIYElectronics PRUSA I3 Instructions de montage

Ackuretta

Ackuretta FreeShape 120 Manuel utilisateur

LONGER

LONGER LK5Pro Manuel utilisateur

Stratasys

Stratasys J850 Manuel utilisateur

MakerBot

MakerBot Replicator Manuel utilisateur

Stratasys

Stratasys FDM Vantage Series Manuel utilisateur

ZYYX

ZYYX Pro II Manuel utilisateur

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Guide de l'utilisateur