ZyXEL Communications P-660HW-D1 Manuel utilisateur

ZyXEL Confidential

340AGL4C0.doc 1/41

ZyXEL

Firmware Release Note

P-660HW-D1

Standard version

Release 3.40(AGL.4)C0

Date: Jan 10 ,2007

Author: Ross Meng

ZyXEL Confidential

340AGL4C0.doc 2/41

ZyXEL P-660HW-D1 Standard Version

Release 3.40(AGL.4)C0

Release Note

Date: Jan 10, 2006

Supported Platforms:

ZyXEL P-660HW-D1

Versions:

ZyNOS Version : V3.40(AGL.4) | 01/10/2007 12:00:00

Bootbase Version : V1.06 | 1/20/2006 9:44:11

Notes:

The P-660HW-D1, is 4th generation of ZyXEL ADSL product family. It is a high

performance ADSL/ADSL2/ADSL2+ router for small/medium office to have Internet

access and LAN-to-LAN application over the existing copper line. P-660HW-D1 takes

advantage of much higher data rate than ADSL, speed up to 12Mbps (ADSL2) or 26Mbps

(ADSL2+), greater reach, faster start-up, advanced diagnostics and better power

management. This high performance ADSL router is a high integrated advanced Firewall,

Bandwidth Management and IEEE 802.11g wireless features to meet the demand of

high-end market.

P-660HW-D1 provides an embedded mini-PCI module for 802.11g Wireless LAN

connectivity, four single auto-sensing, auto-detection 10/100BASE-T Ethernet ports for

connection to the user’s local network, and a single RJ-11/RJ-45 port for connection to

ADSL/ADSL2/ADSL2+ line.

ADSL data pump version: TI AR7 07.00.04.00

Features:

Modifications in V 3.40(AGL.4)C0 | 01/10/2007

1. change to FCS version

Modifications in V 3.40(AGL.4)b4 | 01/02/2007

1．[BUG FIX] SPRID: 061220169

Symptom: Triple Play don’t work

Condition: Bridege mode ,Enable TriplePlay ,the LAN PC can’t get IP from DHCP Server.

Disable TriplePlay ,the LAN PC can get IP from DHCP Server. Route mode,Enable

TriplePlay ,the LAN PC ping DHCP Server,can’t success. Disable TriplePlay ,the LAN PC

ping DHCP Server, successful.

Modifications in V 3.40(AGL.4)b3 | 12/12/2006

ZyXEL Confidential

340AGL4C0.doc 3/41

1．[BUG FIX] SPRID: 061201023

Symptom: More connection has problem.

Condition: When you choose PPP encapsulation in Wan/More Connection, it will crush

or reboot: PPPoE + LLC + Dynamic/Static IP, PPPoA + LLC + Dynamic/Static IP,

PPPoA + VC + Static IP will lead to crush, PPPoA + VC + Dynamic IP will lead to

reboot.

2．[BUG FIX] SPRID: 061201052

Symptom: Reboot Device have some problem

Condition: step1:In GUI,change System name. step2:In CLI,change baud = 115200.

step3:reboot Device. The Device show some abnormal information in CLI.

Modifications in V 3.40(AGL.4)b2 | 11/22/2006

1. [ENHANCEMENT]

Add SMT23.4 function CLI

2. [ENHANCEMENT]

In GUI page: MBM rule config add “DSCP mark” and “TOS” fileds

3. [BUG FIX] SPRID: 060915954

Symptom: Bridge RFC1483 can’t be set correctly in GUI-＞Wizard Setup-＞Internet

Setup.

Condition: Step1 Enter Wizard Setup and start Internet/Wireless Setup.

Step2 When DSL Auto detected fails, select Bridge RFC1483 mode and apply it. It will

still show this configuration page.

Step3 But enter Advance Setup you can see the configuration have been saved

successfully

4. [BUG FIX] SPRID: 060915962

Symptom: Bandwidth MGMT rule with bandwidth larger than 65535 can’t be added

correctly.

Condition: Step1.Bandwidth MGMT-＞Summary LAN interface-＞Speed set to

100000.

Step2. Enter Bandwidth MGMT-＞Rule Setup and add a rule with Bandwidth smaller

than 65536, it will be added correctly.

Step3. Enter Bandwidth MGMT-＞Rule Setup and add a rule with Bandwidth larger

than 65536, the bandwidth which will be saved is the bandwidth you have entered

subtract 65536, for example you have entered 65537, it will be saved as 1

5. [BUG FIX] SPRID: 060915970

Symptom: In Wizard or use CLI command, Wireless SSID accept invalid characters as

@#~^%

Condition: In Wizard or use CLI command, Wireless SSID accept invalid characters as

@#~^%

6. [BUG FIX] SPRID: 060915969

Symptom: In GUI-＞Security-＞Firewall-＞Rules, add rules in 4 packet directions,

when we change any rule ”Active” check box in one of the directions, the others’ will be

changed accordingly.

ZyXEL Confidential

340AGL4C0.doc 4/41

Condition: In GUI-＞Security-＞Firewall-＞Rules, add rules in 4 packet directions,

when we change any rule ”Active” check box in one of the directions, the others’ will be

changed accordingly.

7. [BUG FIX] SPRID: 060915965

Symptom: When add remote node in GUI DUT will crash.

Condition: step1.WAN page set PPPOE and PPPOE passthought click open

step2. More connection set PPPOE apply then it will crash.

8. [BUG FIX] SPRID: 060915973

Symptom: Wireless QoS has problem.

Condition: 1.When use Wireless QoS Application Priority,edit one rule ,Dest

Port=65535 .

2.Use CLI command we can’t send packets to the port.

9. [BUG FIX] SPRID: 060915971

Symptom: In GUI , Wireless shows error message in Packet Status interface.

Condition: when 4x enable ,in Packet Status interface still show 54M.

10. [FEATURE CHANGE]

Use new compressed method to compress firmware.

11. [ENHANCEMENT]

In GUI status pages display four LAN ports status and DSL firmware version

12. [ENHANCEMENT]

Update modem code to Version 7.0.4.0

13. [ENHANCEMENT]

Supports 1530 bytes frame pass through in RFC1483 bridge mode.

14. [BUG FIXED] SPRID: 061121146

Symptom:Reboots problems in traffic jam conditions and huge NAT entries

Condition: Step1:config one PVC dynamic get IP and one PVC static IP

Step2: config one static route rule ,gateway point to static WAN IP.

Step3:run Portscan software in LAN PC,when scan port >10000, DUT will reboot

15. [ENHANCEMENT]

IGMP Snooping enable/disable setting can save to SPT ，configured via CI command:

sys tripleplay igmpsnp enable/disable

Modifications in V 3.40(AGL.4)b1 | 07/17/2006

1. [ENHANCEMENT]

Support APDK 6.3.1.26

2. [ENHANCEMENT]

Triple play V2 for 6996I

3.[ENHANCEMENT]

Update TI modem code to D6.0.4.0

4. [ENHANCEMENT]

Add G+ in wireless status. Remove "Active" in LAN and WLAN status.

5. [BUG FIX] SPRID: 060706288

Symptom: when edit a BM rule, if the bandwidth of the child is larger than the

bandwidth of the parent, it can be saved.

ZyXEL Confidential

340AGL4C0.doc 5/41

Condition: step1:Add a BM rule and save it.

step2:Edit the rule again, and change the bandwidth of the child larger than the

bandwidth of the parent, but it can be saved.

6. [BUG FIX] SPRID: 060706289

Symptom: In GUI, Status page --＞WLAN Information--＞WEP show is not

correct when set some Security such as WPA,WPA-PSK,WPA2,WPA2-PSK.

Condition: Step1: set Security Mode : Static WEP. The Status page show WEP:64-bit

WEP Step2: set Security Mode : WPA . The Status page still show WEP:64-bit WEP

7. [BUG FIX] SPRID: 060706290

Symptom: The configuration pages in administrator mode can be log in in user mode.

Condition: Step1. log in the user mode. Step2. paste the url of the administrator

configuration page in address bar and press enter,then log in the configuration page.

8. [BUG FIX] SPRID: 060706291

Symptom: Wan /more connections/ NAT edit lead to crash.

Condition: Step1. Restore default setting.

Step2. Enter WAN/More Connections, edit one of the connections, then enter NAT SUA

Only edit. After your apply it, It shows Address Mapping rule to edit, when you apply it,

the device will crash.

Or if you choose Back, then edit the connection again, it will enter Address Mapping

rule edit directly.

9. [BUG FIX] SPRID: 060706292

Symptom: When deleting firewall rules, it has problem.

Condition: Step1. In default setting, add 5~6 firewall rules in GUI.

Step2. Delete one of the rules, two rules may be deleted together and the firewall rule

numbers may be disordered. Step3. It will happen sometimes, but the frequence is very

high.

10. [BUG FIX] SPRID: 060706293

Symptom: When add new rule after rule number 9 ,it will show error.

Condition: step 1.Add nine firewall rules.

step 2.Insert a new rule after rule number 9,it shows "INTERNEL ERROR".

but insert a new rule after rule number 1~8,it can be inserted successfully.

11. [BUG FIX] SPRID: 060706294

Symptom: In GUI bandwidth management, when you add more than nine rules, it will

show ”Number of classes reaches the upper bound. Max classes is 9”

Condition: N/A

12. [BUG FIX] SPRID: 060706295

Symptom: GUI status can’t show correct information.

Condition: When WLAN 4x mode enabled, and one client connect to the AP, the

transmission rate shows 125M in client,but in GUI status shows 54M.

13. [BUG FIX] SPRID: 060706296

Problem Symptom:In GUI-＞WAN ,Set two or more remote node, and use same

encapsulation,different VPI/VCI,set static IP. Then delete one rule and set the same

setting in other remote node. Lan PC or device ping the gateway, the device will crash.

Problem Condition:

ZyXEL Confidential

340AGL4C0.doc 6/41

Step1:GUI-＞WAN set two remote node,and use same encapsulation,different VPI/VCI,

and set static IP. Lan PC ping remote node 2 gateway successfully.

Setp2: Delete the remote node 2, and set the same setting in other rule, such as remote

node 5. Lan PC ping remote node 5 gateway, the device will crash.

14. [BUG FIX] SPRID: 060706297

Symptom: CI Command "ip nat server clear [set#]" can not work

Condition: step1:In SMT or GUI add several server

step2:In SMT,use CI Command "ip nat server load [set#]","ip nat server clear [set#]"

and "ip nat server save",it can not clear the server [set#].

15. [BUG FIX] SPRID: 060706298

Symptom:When you add Firewall Rules, another rule will be added automatically.

Condition:1.Add rules one by one,2.When you add the fourth rule, the rule you have

edited will be added, and the fifth rule with default setting will be added

automatically.3.You can add rules continuously, it always shows the same results. For

example, you add the sixth rule , the seventh rule with default setting will be added

automatically

16. [BUG FIX] SPRID: 060706299

Symptom: Can't add 11th Port Forwarding set in eWC NAT.

Condition: If want to add 11th Port Forwarding set, system displays "Max number of

Port Forwarding rules can be added is 11" and won't accept. Iin CI, system allow users to

add 11th set and can see it in eWC.

17. [BUG FIX] SPRID: 060706300

Symptom: LCP echo request ,LCP echo reply and OAM packets are lost under some

stress test.

Condition: PC uploads data via Iperf traffic load simulator with UDP packets ,then

PPPoA connection disconnects after 30-60 seconds and recovers after 30-40 seconds.

18. [FEATURE ENHANCE]

User can set NAT session number per host In GUI

19. [FEATURE ENHANCE]

RomPager upgrade to version 4.5

Modifications in V 3.40(AGL.3)C0 | 05/29/2006

1．Change to FCS version

Modifications in V 3.40(AGL.3)b1 | 05/29/2006

1 . [FEATURE ENHANCE]

Add reset button WLAN Active--Inactive behavior, the reset button new behavior is

below:

For WLAN model:

- 1 sec: enable/disable WLAN function

- 3 sec: enable OTIST

- 10 sec: reset to factory default

2. [FEATURE ENHANCE]

Engineer note:Add CLI command to control wlan restart or not after download NVS

files.

3 . [FEATURE ENHANCE]

ZyXEL Confidential

340AGL4C0.doc 7/41

add wireless card check machine in HTP

Engineer note:

1 when WLAN Card exist, "WLAN LED" will be always on

2 when WLAN Card does not exist, "WLAN LED" will be always off

3 when WLAN Card disappear, "WLAN LED" will be off ,HTP test will be Break and

"SYSTEM LED" will be always on

4. [FEATURE ENHANCE]

Add SDRAM test in HTP

5. [BUG FIX] SPRID: 060529751

symptom: when use multiboot upload firmware ,wireless NVS file will need upload

again.

Condition:use multiboot upload firmware, wireless NVS file before upload will gone, it

need to upload again

Modifications in V 3.40(AGL.2)C0 | 05/17/2006

1. change to FCS version

Modifications in V 3.40(AGL.2)b1 | 05/16/2006

1. [FEATURE ENHANCE]

Modify to support ADM6996i AB,AC,AD version

Modifications in V 3.40(AGL.1) C0 | 03/17/2006

1. change to FCS version

Modifications in V 3.40(AGL.1) b1 | 03/15/2006

1. Update help pages

1) Maintenance > System > General

2) Network > Wireless LAN > OTIST

3) Security > Firewall

4) Advanced > BW MGMT

5) Advanced > Remote MGNT > ICMP

6) Status

Modifications in V 3.40(AGL.0) C0 | 03/13/2006

1 . change to FCS version

Modifications in V 3.40(AGL.0) b5 | 03/06/2006

1. [FEATURE CHANGE]

1). Default password for normal user: user. Default password for admin user: 1234.

web login page password default : user

2). remove the wizard set up from normal user level and remove change password

function for normal user so that normal user can directly view the status page.

2. change default romfile : Default password for normal user: user. Default password for

admin user: 1234.

Modifications in V 3.40(AGL.0) b4 | 03/05/2006

1. [BUG FIX] SPRID: 060302271

Problem Symptom: [Regression]Throughput bridge mode downstream ADSL(packet

length: 64,128) and ADSL2+ (packet length: 64,128,256,512) can’t meet PQA’s

criterion

ZyXEL Confidential

340AGL4C0.doc 8/41

Problem Condition: Throughput bridge mode downstream ADSL(packet length:

64,128) and ADSL2+ (packet length: 64,128,256,512) can’t meet PQA’s criterion.

2. [BUG FIX] SPRID: 060303431

Problem Symptom: Can not get current time from Time server

Problem Condition: step1. Reset default romfile. step2. Config the WAN, set the time

server and select the Time Zone is (GMT=08:00) Beijing, Chongqing, Hong Kong,

Urumqi, then click “Apply”. DUT can get current time and date. step3. Select Manual,

change New Time and New Date, then click “Apply”. step4. Set the time server, this

time it can get current date from time server, but can’t get current time.

3. [BUG FIX] SPRID: 060302268

Problem Symptom: [Regression]In GUI-> Maintenance-> Diagnostic->DSL Line page,

click “Capture All Logs”, the windows which would be show the info will be

disappear.

Problem Condition: In GUI-> Maintenance-> Diagnostic->DSL Line page, click

“Capture All Logs”, the windows which would be show the info will be disappear.

4. [BUG FIX] SPRID: 060301193

Problem Symptom: [Regression]Click the “apply” in wizard wireless page, the DUT

will crash..

Problem Condition: step1. Reset default romfile. step2. In GUI-> Wizard->wireless,

click “next”, “next”, then click “apply”, the DUT will crash.

5. [BUG FIX] SPRID: 060228275

Problem Symptom: [Regression]Set Secure Client IP, it can’t work

Problem Condition: step1. In GUI/ Advanced/ Remote MGMT/ WWW, set Secure

Client IP = 192.168.1.33.step2. Use one PC which IP is not 192.168.1.33, it can still

6. [BUG FIX] SPRID: 060302270

Problem Symptom: Disable the Wireless function, after period of times, LAN PC with

fixed IP ping LAN IP, only the first several ICMP reply packets can be received, then

will show “Request timed out”.

Problem Condition: step1. Use default setting, but disable the Wireless function. step2.

Using a LAN PC with fix IP (EX: 192.168.1.50) ping the DUT LAN IP (192.168.1.1),

and the ping traffic can be handled properly at this moment. step3. Stop the ping traffic

running from 192.168.1.50 to 192.168.1.1, and just leave the DUT powered on. step4.

After about 20 hours, start again the ping traffic from LAN PC to the DUT, will found

only the first several ICMP reply packets can be received, then will show “Request

timed out”, so others can not received.

7. [BUG FIX] SPRID: 060303429

Problem Symptom: [Regression]Bridge mode packet loss (packet size: 64) can’t meet

PQA’s criterion.

Problem Condition: Bridge mode packet loss (packet size: 64) can’t meet PQA’s

criterion.

8. [BUG FIX] SPRID: 060301196

Problem Symptom: Change the Qos type to VBR-RT, the LAN to WAN can’t work

correctly.

Problem Condition: step1. Config DUT, the LAN PC can ping WAN PC; the LAN to

ZyXEL Confidential

340AGL4C0.doc 9/41

WAN can work correctly. step2. Change the Qos type to VBR-RT, the LAN PC can’t

ping WAN PC, the LAN to WAN can not work correctly. step3. Then change the Qos

type to others type (ex.CBR), the LAN to WAN still can not work correctly; but if

reboot the DUT, it can work correctly. step4. The DUT works at bridge mode, it has the

same issue.

9. Change default romfile:turn off PPPoE Passthrough

10. Samsung flash support.

Modifications in V 3.40(AGL.0) b3 | 02/24/2006

1. [BUG FIX] SPRID: 051227526

Problem Symptom: set a schedule, when apply it use CI command “wan node callsch”,

it must fill 4 parameter, that is to say, you must type like this “wan node callsch 1 0 0 0”,

but not like “wan node callsch 1”.

Problem Condition: set a schedule, when apply it use CI command “wan node callsch”,

it must fill 4 parameter, that is to say, you must type like this “wan node callsch 1 0 0 0”,

but not like “wan node callsch 1”.

2. [BUG FIX] SPRID: 051228627

Problem Symptom: in GUI, the Qos have CBR, UBR,VBR-nRT, VBR-RT, but the CI

command it only have CBR, UBR.

Problem Condition: in GUI, the Qos have CBR, UBR,VBR-nRT, VBR-RT, but the CI

command it only have CBR, UBR.

3. [BUG FIX] SPRID: 060109394

Problem Symptom: (bug fixed not comlete)Click the “exit” button it have different

result

Problem Condition: Step1.in wizard or advanced, select “go to wizard set up”, then

click the “exit” button, it pop up a message “are you sure you want to close the

windows?”, select no, then the page won’t change.

Setp2.but if you select “view device status” or “change password” in wizard, or select

“go to advanced setup” in advanced, then do the same setting with step1, the page will

go to the corresponding page.

step3.login with user password have no this issue, but login with admin password this

issue is still exist.

4. [BUG FIX] SPRID: 060111543

Problem Symptom: In GUI-＞Advanced-＞Remote MGMT-＞SNMP, no matter

choose Disable, LAN, or WAN, MIB Browser can run both on LAN and WAN.

Problem Condition: In GUI-＞Advanced-＞Remote MGMT-＞SNMP, no matter

choose Disable, LAN, or WAN, MIB Browser can run both on LAN and WAN.

5. [BUG FIX] SPRID: 060111544

Problem Symptom: When DUT use static IP and set DNS server address in GUI-＞

wizard, LAN PC won＇t resolve domain name.

Problem Condition: Step1. Login with user password, configure DUT use static IP and

set DNS server in wizard setup page.

Step2. in LAN PC try to resolve domain name, but failed.

ZyXEL Confidential

340AGL4C0.doc 10/41

6. [BUG FIX] SPRID: 060112659

Problem Symptom: Whiteboard can’t work well when UPNP is enabling.

Problem Condition: Step1.firewall is enabling. Step2.Enable UPNP, WAN first ask for

whiteboard, the whiteboard can’t work. Step3.Enable UPNP and “allow users to make

configuration changes through UPnP”, the Whiteboard can’t work from LAN to WAN,

or WAN to LAN.

7. [BUG FIX] SPRID: 060113744

Problem Symptom: The word “dasable” in CI command “wan callsch action” was

spelled wrong

Problem Condition: Issue CI command ”wan callsch action”, it show [0:force on|

1:force down| 2:enable dial-on-command | 3:dasable dial-on command], the

word ”dasable” was spelled wrong, it should be ”disable”.

8. [BUG FIX] SPRID: 060113703

Problem Symptom: in the status page, the word “secondes” was spelled wrong.

Problem Condition: login in with user password or with admin password, in the status

page, the Refresh Interval item, the word “secondes” was spelled wrong, it should be

“seconds”.

9. [BUG FIX] SPRID: 060113745

Problem Symptom: set a filter, when apply it use CI command in WAN, it must fill 4

parameter, but apply it in LAN it need not to fill 4 parameter, it can be save when it

have only 1 parameter.

Problem Condition: set a filter, when apply it use CI command in WAN, it must fill 4

parameter, but apply it in LAN it need not to fill 4 parameter, it can be save when it

have only 1 parameter.

10. [BUG FIX] SPRID: 060113746

Problem Symptom: It will show “the flags is: 0x00000007” when save the IP

policyrouting configuration use CI command.

Problem Condition: It will show “the flags is: 0x00000007” when save the IP

policyrouting configuration use CI command.

11. [BUG FIX] SPRID: 060116808

Problem Symptom: Issue CI command “sys stdio 0”,then issue CI command “exit”, the

DUT will hang

Problem Condition: Issue CI command “sys stdio 0”,then issue CI command “exit”,

the DUT will hang

12. [BUG FIX] SPRID: 060116809

Problem Symptom: Type 29 characters, and then click “Generate”, the DUT will crash.

Problem Condition: Step1. login GUI-＞Wireless LAN page, select the Security mode

= Static WEP, in Passphase, type 29 characters, then click the “Generate”.

Step2. the DUT will crash.

Table des matières

Autres manuels ZyXEL Communications Matériel réseau

ZyXEL Communications

ZyXEL Communications NSA-2401 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications NSA-220 Plus Manuel utilisateur

ZyXEL Communications

ZyXEL Communications EM-422 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications GS3700 Series Manuel utilisateur

ZyXEL Communications

ZyXEL Communications NSA325 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications Network Storage Appliance NSA-220 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications UNS2300 Manuel

ZyXEL Communications

ZyXEL Communications POE-12 Guide de référence

ZyXEL Communications

ZyXEL Communications Prestige 1600 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications NSA-220 Plus Manuel utilisateur

ZyXEL Communications

ZyXEL Communications NSA-220 Series Manuel utilisateur

ZyXEL Communications

ZyXEL Communications Prestige 2602R Series Manuel utilisateur

ZyXEL Communications

ZyXEL Communications NXC Series Mode d’emploi

ZyXEL Communications

ZyXEL Communications WAP6405 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZYWALL OTPV2 - Manuel utilisateur

ZyXEL Communications

ZyXEL Communications FMG Series Manuel utilisateur

ZyXEL Communications

ZyXEL Communications NSA-210 Manuel

ZyXEL Communications

ZyXEL Communications NSA-220 Plus Manuel utilisateur

ZyXEL Communications

ZyXEL Communications PoE12 Series Manuel utilisateur

ZyXEL Communications

ZyXEL Communications POE-12 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications Centralized Network Management Vantage CNM Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZyAir G-100 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications VMG4005-B50B Guide d'installation

ZyXEL Communications

ZyXEL Communications Prestige 2602R Series Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur