ZyXEL Communications Prestige 971M Manuel utilisateur

Prestige 971M

Cable Modem

Quick Start Guide

Version 3.70

5/2005

Prestige 971M Quick Start Guide

Introduction

The Prestige 971M (P-971M) is a DOCSIS compliant full-duplex cable modem. In order to use your P-971M,

you need to establish an Internet access account with your cable service company.

Note: To identify your modem with the cable service company, you need to tell them the HFC MAC

address. This 12-character number is located on a bar code sticker on the bottom of the unit.

Once this information has been supplied to your cable operator and your line activated, your P-971M will obtain a

dynamic IP address(es) from your cable service provider whenever connected.

Note: See your User’s Guide for background information on all features.

This guide is divided into the following sections.

1 Hardware Connections

You need the following before you start.

• Computer(s)

• Ethernet Cable

• USB Cable (if accessing the Internet from a Windows computer via USB)

• Power Adaptor (Varies by region)

• RF Connector F-Coaxial Cable

1.1 Rear Panel

Refer to the following P-971M rear panel graphic to see how to make the connections.

1Hardware Connections

2Accessing the Web Configurator

3USB Driver Installation

4Troubleshooting

Prestige 971M Quick Start Guide

1 LAN Connection Use an Ethernet cable to connect a computer to a LAN port for initial configuration and/

or Internet access.

2 USB-B Connection If you want to connect a Windows computer to the cable modem via USB, you also have

to install the USB driver (see page 6 )

3 RF F-Coaxial Connection Use caution when inserting the coaxial cable into the P-971M; the center

copper wire is easy to bend and break.

4 POWER Connection Use the included power adaptor to connect the POWER socket to an appropriate

power source). Turn the Prestige on after you’ve made the connections by pushing in the power button.

Prestige 971M Quick Start Guide

1.2 Front Panel

Look at the front panel LEDs. The SYS LED blinks while performing system testing. The SYS LED then turns

steady on if the testing was successful. The CABLE LED blinks and turns steady on if the RF-Connector port

is properly connected. The LAN LED turns on if the (corresponding) LAN port is properly connected.

Table 1 Front Panel LEDs

LED COLOR STATUS DESCRIPTION

PWR Green On The power is on.

Off The power is off.

SYS Green On The Prestige is receiving power and functioning properly.

Blinking The Prestige is rebooting.

None Off The system is not ready or has malfunctioned.

LAN Green On The LAN Ethernet Port has a successful link.

Blinking The LAN Port is Sending or Receiving Ethernet data.

None Off The LAN Ethernet Port is not ready or cannot achieve a link.

USB Green On The USB-Computer Link is successful.

Blinking The P-971M is Sending or Receiving USB data.

None Off The USB-Computer Link is not ready or unsuccessful.

DATA Green Blinking The Cable Interface (WAN Port), is Transmitting/Receiving.

None Off The WAN connection is idle.

Prestige 971M Quick Start Guide

2 Accessing the Web Configurator

1Launch your web browser. Enter

“192.168.100.1” as the web site address.

The subnet mask is 255.255.255.0.

Note: If you do not see the next screen,

then please read section 4.1.

CABLE Green On The P-971M is registered successfully with the cable operator’s CMTS.

Slow

Blinking

This LED blinks at two-second intervals to denote that the P-971M is

scanning the downstream channel.

Fast

Blinking

This LED blinks at one-second intervals to denote that the P-971M has

locked on to the downstream channel, and is ranging and registering

with CMTS.

2The login screen displays. Enter the user name

(“webadmin” is the default), and password (“1234”

is the default) and click OK.

Note: You should change your login information in

the Security screen in the web configurator.

Table 1 Front Panel LEDs (continued)

LED COLOR STATUS DESCRIPTION

Prestige 971M Quick Start Guide

3You should see this screen after a successful login.

3 USB Driver Installation

Only install the USB driver if you wish to access the Internet by connecting to the P-971M via USB from a

Windows computer.

Note: At the time of writing the USB driver supports the following Windows operating systems.

• Windows 98 Second Edition

• Windows Millenium (Me)

• Windows 2000

• Windows XP

Connect the P-971M USB cable to your computer. If the Windows “found new hardware” installation wizard

does not start, then try one of the following:

• Disconnect the USB cable and connect it again.

• Manually start the Windows “add new hardware” wizard.

• Restart your computer and the P-971M.

Prestige 971M Quick Start Guide

Note: The USB driver is on the included CD.

Screens for Windows XP are shown here. Screens for other supported Windows operating

systems may vary.

Click Next to begin the wizard. Click Back to return to a previous screen or click Cancel to exit the

wizard.

1After you connect the USB cable, Windows should notify you that new

hardware has been found.

2Insert your CD into your computer CD-ROM and choose to

have Windows search the CD for the drive.

3Windows then installs the USB driver. If you see screens

warning you about Windows logo compatibility or digital

signatures not found, just continue.

4Click Finish to complete the wizard. You may be prompted

to restrat your computer depending on what operating

system you are using.

Prestige 971M Quick Start Guide

4 Troubleshooting

4.1 Set Up Your Computer’s IP Address

This section shows you how to set your Windows NT/2000/XP computer to automatically get an IP address.

This ensures that your computer can communicate with your Prestige. Refer to your User’s Guide for detailed

IP address configuration for other Windows and Macintosh computer operating systems.

1In Windows XP, click start, Control Panel. In Windows 2000/NT, click Start, Settings, Control Panel.

2In Windows XP, click Network Connections. In Windows 2000/NT, click Network and Dial-up

Connections.

3Right-click Local Area Connection and then click Properties.

PROBLEM CORRECTIVE ACTION

None of the LEDs light when

you turn the power on.

Make sure that you have the correct AC power adaptor connected to the

Prestige, it is plugged into an appropriate power source and the Prestige is

turned on.

Check all cable connections. If the LEDs still do not turn on, you may have a

hardware problem. In this case, you should contact your local vendor.

Cannot access the Prestige web

configurator from my computer.

The LAN LED is off.

Check the cable connection from your computer to the Prestige.

You must use Internet Explorer 6.0 (or later), or Netscape Navigator 7.0 (or

later) with JavaScript enabled.

Make sure you enter the password correctly (the field is case sensitive).

Cannot access the Internet. Check the condition of the coaxial cable connected to the back of the cable

modem. If the cable looks to be in poor condition replace it.

Check with your cable operator to ensure your Internet account has been

activated. Be sure that you have given the correct HFC MAC address to your

cable operator.

Make sure your computer is configured for TCP/IP networking and is able to

receive a dynamic IP address (see section 4.1).

The USB LED is off. Check the USB cable connection.

Check that your computer operating system is supported by the USB driver and

that it has been properly installed. Try installing the USB software again if not.

Prestige 971M Quick Start Guide

4Select Internet Protocol (TCP/IP) (under the General tab in Win

XP) and click Properties.

5The Internet Protocol TCP/IP Properties screen opens (the

General tab in Windows XP).

6Select the Obtain an IP address automatically and Obtain

DNS server address automatically options.

7Click OK to close the Internet Protocol (TCP/IP) Properties

window.

8Click Close (OK in Windows 2000/NT) to close the Local Area

Connection Properties window.

9Close the Network Connections screen.

Viewing Your Product’s Certifications

1Go to www.zyxel.com.

2Select your product from the drop-down list box on the ZyXEL

home page to go to that product's page.

3Select the certification you wish to view from this page.

Autres manuels pour Prestige 971M

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels ZyXEL Communications Modem

ZyXEL Communications

ZyXEL Communications P-2602R/RL-DXA Manuel utilisateur

ZyXEL Communications

ZyXEL Communications P-870MH-C1 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications U-1496 series Manuel utilisateur

ZyXEL Communications

ZyXEL Communications P-971M Manuel utilisateur

ZyXEL Communications

ZyXEL Communications Prestige 2602HWNLI-D7A Manuel

ZyXEL Communications

ZyXEL Communications ONU-631HA Series Manuel utilisateur

ZyXEL Communications

ZyXEL Communications P-872H Manuel utilisateur

ZyXEL Communications

ZyXEL Communications P841C Manuel utilisateur

ZyXEL Communications

ZyXEL Communications XOHM MAX-206M2 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications Comet 3356 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications P-870M-I1 V2 Guide de référence

ZyXEL Communications

ZyXEL Communications Prestige 630 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications Prestige 630-C series Manuel utilisateur

ZyXEL Communications

ZyXEL Communications PRESTIGE 861 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications P-871H Series Manuel utilisateur

ZyXEL Communications

ZyXEL Communications MAX208M Manuel utilisateur

ZyXEL Communications

ZyXEL Communications P-630-S Series Manuel

ZyXEL Communications

ZyXEL Communications Omni 128L Manuel utilisateur

ZyXEL Communications

ZyXEL Communications IES-1248-51 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications P-870M-I1 V2 Manuel

ZyXEL Communications

ZyXEL Communications Omni 56K Manuel utilisateur

ZyXEL Communications

ZyXEL Communications P630 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications P-664HN-T1 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications MAX-306M1 Manuel utilisateur

Manuels Modem populaires d'autres marques

Davicom

Davicom DM562AP Manuel utilisateur

EpiValley

EpiValley TATA indicom SXC-1080 Manuel utilisateur

Zte

Zte WiMAX Manuel utilisateur

Intelimax

Intelimax MA-2060 Manuel utilisateur

SMC Networks

SMC Networks D3CM1604V Manuel d'utilisation et d'entretien

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manuel utilisateur

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manuel utilisateur

Samsung

Samsung AceLink SAM-335A Manuel utilisateur

Enfora

Enfora Enabler-G Guide de configuration rapide

iRZ

iRZ ATM2-232 Manuel utilisateur

Zhone

Zhone 6310 Manuel utilisateur

Paradyne

Paradyne Hotwire 7976 Manuel utilisateur

US Robotics

US Robotics 3453C Manuel utilisateur

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuel utilisateur

Zte

Zte MF823 Manuel utilisateur

Four-Faith

Four-Faith F1403 Manuel utilisateur

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manuel utilisateur

Gemtek

Gemtek WiMAX WIXFBR-103 Manuel utilisateur