Zte OPTUS MF920V Manuel utilisateur

Autres manuels pour OPTUS MF920V

3

Table des matières

Autres manuels Zte Routeur sans fil

Manuels Routeur sans fil populaires d'autres marques

Milesight

Milesight UG67 Manuel utilisateur

Airlogic

Airlogic AirSync Class 1 Manuel du propriétaire

Samsung

Samsung WCH730B Manuel utilisateur

TELEFONICA

TELEFONICA USB Adapter Manuel utilisateur

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Manuel utilisateur

Askey

Askey RAC2V1K Manuel utilisateur

Alloy

Alloy WLF2454AP-S Manuel utilisateur

TP-Link

TP-Link TL-WR542G Manuel utilisateur

NETGEAR

NETGEAR WNR2000v4 Manuel utilisateur

Hama

Hama 53120 Manuel utilisateur

Intellinet

Intellinet 524582 Manuel utilisateur

Asus

Asus RT-N10P Manuel utilisateur

D-Link

D-Link DIR-506L Manuel utilisateur

Sapido

Sapido GR297n Manuel utilisateur

Asus

Asus DSL-N55U Manuel utilisateur

AMTC

AMTC WR7502 Manuel utilisateur

Compaq

Compaq CP-2W - iPAQ Connection Point Manuel utilisateur

SMC Networks

SMC Networks WBR14-N2 FICHE Manuel utilisateur

Page 1 of 23

OPTUS MF920V

4G WI-FI HOTSPOT

USER MANUAL

Page 2 of 23

CHECK YOUR SYSTEM REQUIREMENTS

Your 4G Wi-Fi hotspot will connect to any device that supports Wi-Fi, 802.11 b/g/n

A web browser is required to log in to your Wi-Fi hotspot if you wish to make any

configuration changes.

USB driverless connection is also supported for Windows, MAC and LINUX

operating systems:

•Windows 10, 8 (not including RT) / 7 / XP / Vista

•MAC OS X 10.5.11 and above

•Linux

Using the USB connection requires administrator rights to install and run the

software.

We suggest you switch off your anti-virus software before connecting the hotspot

- In some cases protection software can prevent automatic installation.

It is possible to start the installation process manually by clicking the Autorun icon

when it appears.

Page 3 of 23

GET TO KNOW YOUR 4G WI-FI HOTSPOT

Page 4 of 23

INSERT YOUR SIM CARD

1. Open the SIM tray cover to access the SIM slot and the Reset button.

2. Insert your SIM card carefully as shown:

3. Close the SIM tray cover.

4. You are now ready to power up your device and you’ll be on-line in no time.

IMPORTANT

This device supports a micro SIM or 3FF size.

Do not insert a nano SIM (4FF) or use a nano to micro SIM adaptor.

Use of 3rd party adaptors or non approved SIM card can damage your device.

Physical damage to the SIM card slot is not covered by warranty and will make

your device unusable.

TIPS

Remember to keep your plastic SIM card holder. It has a record of your SIM card

which you should keep handy.

If you cannot connect via Wi-Fi because you have lost, changed or forgotten your

password please connect your device to a computer and log in via the web User

Interface (192.168.0.1). See USB Installation for Tethered Connection.

Page 5 of 23

POWER UP YOUR 4G WI-FI HOTSPOT

Press and hold the Power key for 3-4 seconds until the lights flash.

The LED’s flash in sequence to indicate the start up condition. During this

sequence the device functions are not available.

The Wi-Fi hotspot will be available after about 20 seconds.

Note: If you insert the charger with the device off, or the battery is flat, you can

only power up the device after about 20 seconds when the start up sequence is

complete.

Check the condition of your Wi-Fi hotspot as shown by the LED indicators.

LED INDICATORS

On, battery is low (<23%).

Flashing, battery is discharged, (< 12 %).

On, battery is OK (>23 %).

Flashing, battery is charging.

On, WPS is enabled, available for 2 minutes.

Flashing, Wi-Fi is On.

Off, Wi-Fi is off.

A new message has arrived. Check the web UI to read.

Flashing, a software update is available, check the web

interface for details.

Not registered on the network.

No SIM, invalid SIM, PIN or PUK locked.

On, device is registered on 2G/3G,

Flashing, device is connected to 2G/3G.

Device is registered on 4G

Flashing, device is connected to 4G

During periods of inactivity it is normal for the LED’s to go out to preserve battery

life. Press the power key briefly to confirm the device status if required.

CONNECT DEVICES BY WI-FI

Your 4G Wi-Fi hotspot can connect up to five devices via Wi-Fi providing internet

access for all your devices on the go.

•On the devices you wish to connect make sure Wi-Fi is switched on, then search

for Wi-Fi devices.

•The Wi-Fi hotspot will show up as OPTUS_xxxxxx, click on this device to

Page 6 of 23

connect.

•Consult your SSID sticker and enter the default Wi-Fi key which is case sensitive.

Any letters entered must be in upper case (capitals).

Connection example for Windows 7 computer:

1. On your task bar, next to the clock, click on the Network Interface icon

2. Click on the Wireless device OPTUS_xxxxxx

3. Enter the password exactly as shown on your SSID sticker observing the correct

case for all letters

4. With Connect Automatically enabled your computer will remember the

password and connect to your Wi-Fi device when it is on and in range.

TIP

It is also possible to connect via USB connection. See later for details.

QUICK REFERENCES

Browser home page http://192.168.0.1

Administrator login admin

Default SSID OPTUS_xxxxxx

Supplied on your SSID Sticker on the device and a spare

sticker in the box.

Default Wi-Fi Key 10 characters which are case sensitive.

Supplied on your SSID Sticker.

Restore defaults From the powered up state:

Open the SIM cover and use a toothpick, paperclip or

other suitable device to press and hold the “Reset” button

for 5 seconds.

All passwords and settings will be restored to defaults

and the hotspot will reboot.

Use the default credentials on your SSID sticker to log

back onto your device or log in via the USB connection if

you do not know your password.

Page 7 of 23

LOGIN TO THE USER INTERFACE

Open a browser and go to http://192.168.0.1 to access the hotspot home page.

The default login password is ‘admin’

Page 8 of 23

HOTSPOT HOMEPAGE OVERVIEW

Page 9 of 23

STATUS INDICATORS

Tip use your mouse to hover over the icons to see a brief description for each icon.

CONNECTED DEVICES

•Click on 1. Access Devices to see the list of devices connected to your hotspot.

CONNECTION SETTINGS

•Click on 2. Network (Optus) Settings to view or configure your Network settings.

•Note to make any changes you need to disconnect first.

•Click on the On / Off switch to switch off your Network data connection

Page 10 of 23

CONNECTION MODE

•The default state is to automatically connect to the network. If you wish to

change this behaviour, first disconnect from the network by selecting Off on the

device overview page then set Manual and press Apply to save your changes.

•Enable Roaming if you wish to use the device overseas. (High data charges will

apply, check with your carrier)

NETWORK SELECTION

•Network Selection is set to Automatic. You can choose to lock to preferred

network technologies such as 4G, 3G or 2G only.

•Press the Disconnect button to change this setting if required.

•If you make any changes, press Apply to save your changes