Zte MF286R Manuel utilisateur
MF286R
Let’s go
Getting started with your device.
1
LEGAL INFORMATION
Copyright © 2019 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted, reproduced, translated or
utilized in any form or by any means, electronic or mechanical, including
photocopying and microlm, without the prior written permission of ZTE
Corporation.
The manual is published by ZTE Corporation. We reserve the right to
make modications on print errors or update specications without prior
notice.
Version No. : R1.0
Edition Time: August 14, 2019
2
Getting to Know Your Device
External View
NOTE:
Please use the original external antenna if necessary.
3
Indicators
Indicator State Description
POWER Blue on Power is on and external power
supply is working normally.
O Power is o or external power
supply is working abnormally.
WIFI
Blue on Wi-Fi works normally with no
data transmission.
Blue Blinking Wi-Fi works normally with data
transmission.
O Wi-Fi works abnormally or the
Wi-Fi function is disabled.
PHONE O The phone is not in use.
Blue Blinking The phone is ringing.
Blue on The phone is in calling.
4
Indicator State Description
3G/4G
Red
The device is turned on but not
registered to the mobile network.
No (U)SIM card is inserted or
there is no network service
available.
Blue Blinking
The device is connected to the
LTE network and data is being
transferred.
Blue Solid The device is registered to the
LTE network.
Green Blinking
The device is connected to the
2G/3G network and data is being
transferred.
Green Solid The device is registered to the
2G/3G network.
SIG Blue on Signal level panel. Strength is
from weak to strong.
O There is no signal or no (U)SIM
card is inserted.
NOTE:
The phone function needs the network support.
5
Buttons
Button Description
RESET Press and hold for about 3 seconds to restore factory
default congurations.
WLAN Press to turn o/on the Wi-Fi function.
WPS • Press to activate the WPS function.
• Press to wake device up.
Installing the (U)SIM card (optional)
Hold the (U)SIM card with the cut corner oriented as shown and slip it
into the card slot until you hear a click.
6
WARNINGS!
• Before installing the (U)SIM card, power o your device and remove
the external power adapter.
• Your device does not support micro-SIM and nano-SIM card or any
other nonstandard (U)SIM cards. To avoid device damage, please
do not use them or any card holders.
7
Getting Started With Your Device
Connecting Your Device
Follow the number to connect your device.
If you select a dierent operation mode, the connection of the LAN port
will be dierent. Please refer to the chapter “Accessing the Internet”.
If you want to use the mobile network to connect to the Internet or use
your home phone, you need to insert your (U)SIM card rst.
8
Starting Your Device
CAUTION:
Your device must be placed in a well-ventilated environment. Do not
cover the device.
Slide the on/o switch to start your device. After the device is initialized,
make sure the LED indicators are in normal status.
NOTE:
After your device is powered o, if you are called, the caller will hear
a prompt tone like “The subscriber you are dialing cannot be reached
now.”
Conguring Your PC
The following procedure describes how to congure the Internet
Protocol in Windows for your Wi-Fi connection.
1. Right-click
Network and select Properties.
2. Select
Change adapter settings.
3. Right-click
Wireless Network Connection and select Properties.
NOTE:
If you use a network cable to connect your PC to your device, you need
to right-click Local Area Connection and select Properties.
Autres manuels pour MF286R
1
Table des matières
Autres manuels Zte Routeur sans fil
Zte
Zte Z079584505806 Manuel utilisateur
Zte
Zte Tata Docomo Manuel utilisateur
Zte
Zte Unite II Manuel utilisateur
Zte
Zte MF63 Manuel utilisateur
Zte
Zte MF985 Manuel utilisateur
Zte
Zte MU5001 Manuel utilisateur
Zte
Zte MF65 Manuel utilisateur
Zte
Zte Telstra MF90 Manuel utilisateur
Zte
Zte Z288L Manuel utilisateur
Zte
Zte Z291DL Manuel utilisateur
