Zte MF971L Instructions d'installation
MF971L
Let’s go
Getting started with your device.
1
1. Prepare
yA valid micro-SIM card.
yView the label on your device to get the default
only.
2
2. Insert the micro-SIM Card
1. Take out the card sticker from the packing box.
2. Align the card sticker with the micro-SIM area on the
metal-free side of the micro-SIM card and then stick it.
3. Open the micro-SIM card slot cover.
NOTE:
Do not remove the cover rudely, because it is connected
with the device.
3
4. Insert your micro-SIM card.
WARNING!
To avoid damage to the device, do not use any other kind
of SIM cards, or any non-standard micro-SIM card cut from
a SIM card. You can get a standard micro-SIM card from
your service provider.
5. Close the micro-SIM card slot cover.
4
3. Start Your Device
Press and hold the Power key for about 1.5
seconds to power on the device. After a moment the device
will connect to the Internet automatically.
NOTE:
If the battery is extremely low, you may be unable to power
5
4. Access the Internet
yWi-Fi: Get the default SSID and password on the label
and connect to the Wi-Fi network with your mobile
device, and then access the Internet.
ymicro-USB cable: Connect with the computer via USB
port and then access the Internet.
NOTE:
If the operating system does not automatically launch
installation, you can double-click the device installation
icon in the virtual CD-ROM to install the software.
6
5. Change Your Device Settings
You can change the device settings by logging in to the
1. View the label on your device to get the default Device
Manager Website IP address and Password.
2. Launch the Internet browser. Enter the Device Manager
Website IP address in the Address bar.
3. Input the password and then click Login.
change the Wi-Fi SSID, password or other settings.
7
Indicator Icons and Interfaces
8
1 Power key
yPress and hold for about 1.5
device.
yPress and hold for about 8
seconds to restart your device
2 WPS key Press and hold for 1.5 seconds to
activate the WPS function.
3 Battery Red solid / blinking: The battery is
low. Please charge the battery.
Green blinking: The battery is being
charged.
Green solid: The battery level is
middle or high.
and not being charged.
Wi-Fi Blue solid: Wi-Fi is active.
Blue blinking: WPS is active.
SMS Blue solid: You have unread
messages.
Blue blinking: You have new
messages or the message storage is
full.
message nor a new message.
Table des matières
Langues :
Autres manuels Zte Routeur sans fil
Zte
Zte MF51 Manuel utilisateur
Zte
Zte MF93D Manuel utilisateur
Zte
Zte R218 Manuel utilisateur
Zte
Zte Z6200 Manuel utilisateur
Zte
Zte MF970 Manuel utilisateur
Zte
Zte ZXHN F680 Manuel utilisateur
Zte
Zte Pocket WiFi 5G A101ZT Manuel utilisateur
Zte
Zte Z288L Manuel utilisateur
Zte
Zte Tata Docomo Manuel utilisateur
Zte
Zte Vodafone R209-Z Manuel utilisateur
Zte
Zte MF10 Manuel utilisateur
Zte
Zte Z289L Manuel utilisateur
Zte
Zte MF920U Manuel utilisateur
Zte
Zte O2 MF60 Manuel utilisateur
Zte
Zte Z288L Manuel utilisateur
Zte
Zte MF283U Manuel utilisateur
Zte
Zte Unite III Manuel utilisateur
Zte
Zte MF62 Guide de configuration
Zte
Zte MF971V Manuel utilisateur
Zte
Zte mobile hotspot Manuel utilisateur
