Zte K4607-Z Manuel utilisateur

K4607-Z

DC-HSPA+ USB Modem

Quick Guide

ZTE CORPORATION

NO. 55, Hi-tech Road South, ShenZhen, P.R.China

Postcode: 518057

Tel: +86-755-26779999

URL: http://www.zte.com.cn

E-mail: [email protected]

LEGAL INFORMATION

No part of this publication may be excerpted, reproduced, translated or utilized in any form

or by any means, electronic or mechanical, including photocopying and microfilm, without

the prior written permission of ZTE Corporation.

The manual is published by ZTE Corporation. We reserve the right to make modifications

on print errors or update specifications without prior notice.

Version No.: 1.0

Edition Time: 2013, 07

Confidential and Proprietary Information of ZTE CORPORATION 1

Quick Guide

Introduction

The ZTE K4607-Z USB modem is a multi-mode USB modem, working in

HSPA+/HSUPA/HSDPA/WCDMA/EDGE/GPRS/GSM networks. With USB interface

connecting to a laptop or a desktop PC, it integrates the functionality of a modem and a mobile

phone (SMS), and combines mobile communication with Internet perfectly. It supports data and

SMS services through the mobile phone network, enabling you to communicate anytime and

anywhere.

Getting to know your device

The following figure shows the appearance of the K4607-Z. It is only for your reference. The

actual product may be different.

1. microSD card slot

2. SIM/USIM card slot

3. USB Connector

4. Modem Cap

5. Front Cover

NOTE：

The microSD Logo ( ) is a trademark of SD-3C, LLC.

Indicator

Indicator Status

Description

Red

Turn on but not register.

Green Bright

Green Twinkling

Connect to 2G/3G network.

2 Confidential and Proprietary Information of ZTE CORPORATION

Hardware Installation

1. Open the front cover to remove it from the modem.

NOTE:

Do not open the front cover rudely to avoid the damage of the front cover.

2. Insert the SIM card into the SIM card slot.

3. Insert the microSD card into the microSD card slot.

NOTE:

This modem only supports microSD card.

4. Replace the front cover and click it into place.

Confidential and Proprietary Information of ZTE CORPORATION 3

5. Connect the Modem to your laptop or desktop PC. Plug the USB connector into your

computer’s USB port and make sure that it is tightly inserted.

The OS will automatically recognize the new hardware, and then start the installation wizard.

Warning and Notice

To the Owner

•Some electronic devices are susceptible to electromagnetic interference sent by modem if

inadequately shielded, such as the electronic system of vehicles. Please consult the

manufacturer of the device before using the modem if necessary.

•Operating the modem may interfere with medical devices like hearing aids and pacemakers.

Please always keep them more than 20 centimeters away from such medical devices when

they are turned on. Turn the modem off if necessary. Consult a physician or the manufacturer

of the medical device before using the modem.

•Be aware of the usage limitation when using a modem at places such as oil warehouses or

chemical factories, where there are explosive gases or explosive products being processed.

Turn off your modem if required.

•The use of electronic transmitting devices is forbidden in aircrafts, at petrol stations and in

hospitals. Please observe and obey all warning signs and switch off your modem in these

conditions.

4 Confidential and Proprietary Information of ZTE CORPORATION

•Do not touch the inner antenna area if not necessary. Otherwise it will affect your modem’s

performance.

•Store the modem out of the reach of little children. The modem may cause injury if used as a

toy.

•Do not touch the metallic parts of the modem so as to avoid a burn, when the modem is

working.

Use Your USB Modem

•Please use original accessories or accessories that are authorized. Using any unauthorized

accessories may affect your modem’s performance, and violate related national regulations

about telecom terminals.

•Avoid using the modem near or inside metallic structures or establishments that can emit

electromagnetic waves. Otherwise it may influence signal reception.

•The modem is not waterproof. Please keep it dry and store in a shady and cool place.

•Do not use the modem immediately after a sudden temperature change. In such case, it will

produce dew inside and outside the modem, so don’t use it until it becomes dry.

•Handle the modem carefully. Do not drop, bend or strike it. Otherwise the modem will be

damaged.

•No dismantling by non-professionals and only qualified technicians can undertake repair

work.

•Operating temperature range of -10 ℃~ +55 ℃and humidity range of 5% ~ 95% are

recommended.

Limited Warranty

•This warranty does not apply to defects or errors in the Product caused by:

i. Reasonable abrasion.

ii. End User’s failure to follow ZTE’s installation, operation or maintenance instructions or

procedures.

iii. End User’s mishandling, misuse, negligence, or improper installation, disassembly,

storage, servicing or operation of the Product.

Confidential and Proprietary Information of ZTE CORPORATION 5

iv. Modifications or repairs not made by ZTE or a ZTE-certified individual.

v. Power failures, surges, fire, flood, accidents, actions of third parties or other events

outside ZTE’s reasonable control.

vi. Usage of third-party products, or usage in conjunction with third-party products provided

that such defects are due to the combined usage.

vii. Any other cause beyond the range of normal usage intended for the Product.

End User shall have no right to reject or return the Product, or receive a refund for the Product

from ZTE under the above-mentioned situations.

•This warranty is End User’s sole remedy and ZTE’s sole liability for defective or

nonconforming items, and is in lieu of all other warranties, expressed, implied or statutory,

including but not limited to the implied warranties of merchantability and fitness for a

particular purpose, unless otherwise required under the mandatory provisions of the law.

Limitation of Liability

ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential

damages resulting from or arising out of or in connection with using of this product, whether or

not ZTE had been advised, knew or should have known of the possibility of such damages,

including, but not limited to lost profits, interruption of business, cost of capital, cost of substitute

facilities or product, or any downtime cost.

How to Get Help

You can get Help by:

•Clicking Help on the software.

•Sending E-mail to [email protected]

•Visiting http://www.zte.com.cn

•Calling Service Hotline: +86–755–26779999

6 Confidential and Proprietary Information of ZTE CORPORATION

Troubleshooting

Problem

Suggested Solution

Can not establish the USB

connection between your

device and PC.

You need to install the software. Run the installation program

in path of My Computer > ZTEMODEM.

If the driver of your device is abnormal, please reinstall the

software. You need to uninstall the software first.

The client connected to

the device can not access

the Internet.

Make sure your SIM card is available.

Change the location to find a place with good signal.

Check network settings.

Contact with your service provider and confirm your APN

settings.

Can not visit the webGUI

configuration page.

Enter the correct address. The default address is

http://192.168.0.1 or http://m.home.

Only use one network adapter in your PC.

Do not use any proxy server.

Can not connect to the

network automatically in

Windows 8 operating

system.

Click the icon on the task bar of the screen when you insert

the device to the PC, and then tick the Connect automatically

checkbox in the Networks, then click Connect.

FCC Regulations:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

This device has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiated radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

Confidential and Proprietary Information of ZTE CORPORATION 7

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

-Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could

void the user‘s authority to operate the equipment.

RF Exposure Information (SAR)

This device meets the government’s requirements for exposure to radio waves. This device is

designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF)

energy set by the Federal Communications Commission of the U.S. Government. The exposure

standard for wireless device employs a unit of measurement known as the Specific Absorption

Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted using

standard operating positions accepted by the FCC with the device transmitting at its highest

certified power level in all tested frequency bands. Although the SAR is determined at the

highest certified power level, the actual SAR level of the device while operating can be well

below the maximum value. This is because the device is designed to operate at multiple power

levels so as to use only the poser required to reach the network. In general, the closer you are to a

wireless base station antenna, the lower the power output. SAR compliance has been established

in the host product(s) (laptop computers), tested at 5mm separation distance to the human body,

and tested with USB slot configurations including Horizontal-UP, Horizontal-Down,

Vertical-Front, Vertical-Back. This device can be used in host product(s) with substantially

similar physical dimensions, construction, and electrical and RF characteristics. The highest SAR

value, tested per FCC RF exposure guidelines for USB dongle, as described in this user guide, is

1.33 W/kg. The FCC has granted an Equipment Authorization for this device with all reported

SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information

on this device is on file with the FCC and can be found under the Display Grant section of

www.fcc.gov/oet/ea/fccid after searching on FCC ID: SRQ-K4607-Z.

Table des matières

Manuels Modem populaires d'autres marques

Davicom

Davicom DM562AP Manuel utilisateur

EpiValley

EpiValley TATA indicom SXC-1080 Manuel utilisateur

Intelimax

Intelimax MA-2060 Manuel utilisateur

SMC Networks

SMC Networks D3CM1604V Manuel d'utilisation et d'entretien

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manuel utilisateur

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manuel utilisateur

Samsung

Samsung AceLink SAM-335A Manuel utilisateur

Enfora

Enfora Enabler-G Guide de configuration rapide

iRZ

iRZ ATM2-232 Manuel utilisateur

Zhone

Zhone 6310 Manuel utilisateur

Paradyne

Paradyne Hotwire 7976 Manuel utilisateur

US Robotics

US Robotics 3453C Manuel utilisateur

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuel utilisateur

Four-Faith

Four-Faith F1403 Manuel utilisateur

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manuel utilisateur

Gemtek

Gemtek WiMAX WIXFBR-103 Manuel utilisateur

Zoom

Zoom 1070 Series Manuel utilisateur

Aztech

Aztech HW831 Manuel utilisateur