Zoom X5 Guide de démarrage rapide

02/12/2009 v3.0.0

Firmware Version 3.0.0 for Zoom ADSL X5 Model 5654A

This firmware is only compatible with the Zoom ADSL X5 Model 5654A. You have a 5654 “A”

model version if the bottom barcode label contains 5654-xx-xxAF.

Please read through these steps before proceeding.

Important Notes

•This firmware upgrade consists of a batch file program that requires a Windows computer.

This computer must be connected directly to the Zoom ADSL X5 modem with an Ethernet

cable.

•The modem must be reset to factory default settings as part of the upgrade process. For this

reason, please take note of the modem’s Basic Setup settings as well as any configurations

you have made on the Advance Setup pages. You will need to re-enter your settings

manually after the modem has been upgraded.

How to Apply the Firmware Upgrade

Connect a Windows computer directly into one of the X5’s ETHERNET ports. (Note: Do not

attempt to carry out the firmware upgrade over a USB connection or through another router

or network device!)

Unplug the DSL line from the back of the X5. Also unplug any USB cable and any other

Ethernet cables except the one for the computer on which you will be upgrading from.

You must perform a hard factory reset on the modem:

aMake sure the modem is powered on and then, using a straightened paperclip or similar

object, press and hold the modem’s RESET button for 5 seconds.

bThis reset will take about 30 seconds to complete. The modem’s ETHERNET and DSL

lights will turn off briefly. Please wait until the DSL light starts to blink again.

Close all running programs, including any instant messaging applications.

We recommend turning off any anti-virus software and firewall or Internet security software

running on your computer. These programs could interfere with the firmware batch file.

If you are using Windows Vista, make sure that you have turned on the Telnet Client:

aFrom the Start menu, select Control Panel →Programs and Features.

bIn Programs and Features, in the Tasks pane (left column), click Turn Windows

features on or off.

cIf a User Account Control message appears, click Allow.

dIn the Windows Features dialog box, select Telnet Client, click OK, and wait while the

feature is configured.

eIn the Uninstall or Change a Program window, click the Close box to exit.

Open the 5654A_300 folder, the X5-Upgrade folder, and then double-click the update (or

update.bat) icon. A command prompt window appears saying “Beginning upgrade…”

If you get an error message saying “Could not read MAC address of device. Aborting

operation,” verify that you have done the hard factory reset correctly per Step 3 and then run

the update program again. If the error persists, please contact Technical Support for

assistance.

You will see several status messages indicating the progress of the upgrade. After you see

“Done,” the modem will reboot itself (the modem’s ETHERNET and DSL lights will turn off

briefly). Please wait until the DSL light starts to blink again. This entire upgrade process takes

about 2 minutes.

To confirm a successful firmware upgrade:

aOpen a web browser and enter http://10.0.0.2 in the address bar. When prompted for a

Username and Password, enter:

•Username: admin

•Password: zoomadsl (where “l” is a lowercase letter L)

bWhen the Basic Setup page appears, click the System Status icon and check that the

S/W Version includes 3.0.0.

1010

Now you may reconnect the cables and re-enter the modem’s settings. Remember to click

the Save Changes and Write Settings to Flash buttons after making changes. (Note: If you

do not see the Save Changes button, click your web browser’s refresh/reload button and try

again.)

If you disabled any anti-virus/firewall/security software and other programs, you may now turn

them back on.

Note: This firmware version does not support Dynamic DNS.

Autres manuels pour X5

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Zoom Modem

Zoom

Zoom X7N Manuel utilisateur

Zoom

Zoom X6V 5695 Manuel utilisateur

Zoom

Zoom ComStar XT SVD Mode d’emploi

Zoom

Zoom IG 4165 Instructions d'utilisation

Zoom

Zoom 4630 Manuel utilisateur

Zoom

Zoom 1070 Series Manuel utilisateur

Zoom

Zoom 10/100BaseT Manuel utilisateur

Zoom

Zoom X5 Manuel utilisateur

Zoom

Zoom 2985C Manuel utilisateur

Zoom

Zoom X5V Manuel utilisateur

Zoom

Zoom 3GM1073 Manuel utilisateur

Zoom

Zoom 1090 Series Manuel utilisateur

Zoom

Zoom 4598 Manuel utilisateur

Zoom

Zoom 1099 Series Manuel utilisateur

Zoom

Zoom 4650 Manuel utilisateur

Zoom

Zoom CableModem 5031 Manuel utilisateur

Zoom

Zoom Ethernet Manuel utilisateur

Zoom

Zoom 5590 Manuel utilisateur

Zoom

Zoom 5354 Manuel utilisateur

Zoom

Zoom ComStar XT SVD Manuel utilisateur

Zoom

Zoom 27575 Manuel utilisateur

Zoom

Zoom X5 Manuel utilisateur

Zoom

Zoom PCI Cable Modem Manuel utilisateur

Zoom

Zoom 1091 Series Manuel utilisateur

Manuels Modem populaires d'autres marques

Davicom

Davicom DM562AP Manuel utilisateur

EpiValley

EpiValley TATA indicom SXC-1080 Manuel utilisateur

Zte

Zte WiMAX Manuel utilisateur

Intelimax

Intelimax MA-2060 Manuel utilisateur

SMC Networks

SMC Networks D3CM1604V Manuel d'utilisation et d'entretien

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manuel utilisateur

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manuel utilisateur

Samsung

Samsung AceLink SAM-335A Manuel utilisateur

Enfora

Enfora Enabler-G Guide de configuration rapide

iRZ

iRZ ATM2-232 Manuel utilisateur

Zhone

Zhone 6310 Manuel utilisateur

Paradyne

Paradyne Hotwire 7976 Manuel utilisateur

US Robotics

US Robotics 3453C Manuel utilisateur

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuel utilisateur

Zte

Zte MF823 Manuel utilisateur

Four-Faith

Four-Faith F1403 Manuel utilisateur

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manuel utilisateur

Gemtek

Gemtek WiMAX WIXFBR-103 Manuel utilisateur