ZKTeco FaceKiosk-H13A Manuel utilisateur

Quick Start Guide

FaceKiosk-H13A/C

Version: 2.0

Due to regular upgrades of systems and products, ZKTeco could not guarantee exact consistency between the

actual product and the written information in this manual.

1. Device Overview

Wall Mount Facekiosk-H13A

Speaker

RFID Card Reading Area

Near Infrared Fill Light

Fingerprint Scanner

13.3-inch High-deﬁnition Capacitive Touch Screen

Visible Light Camera

Near Infrared Camera

LED Fill Light

Ticket Printer

QR Code Scanner

LED Fill Light

Near Infrared Camera

Visible Light Camera

13.3-inch High-deﬁnition

CapacitiveTouch Screen

Speaker

Fingerprint Scanner

RFID Card Reading Area

Near Infrared Fill Light

Floor Mount Facekiosk-H13C

2. Facekiosk Installation

Wall Mount Installation Procedure

Before installation, connect the wire to the device and pass it through

the lower aperture of the device.

1Align the back plate with respect to the screw holes on the back of

the device.

2Secure the plate with the screws (11 pcs) to the back of the unit.

3Place the rear panel at the most appropriate height from the

ground. Drill the holes on the wall and ﬁx the rear panel.

Set the device in an appropriate position on the rear panel that is

ﬁxed on the wall.

Secure the Kiosk by assembling the device and the rear panel with

the bottom screws.

Floor Mount Installation Procedure

Take the device and the base from the box, and insert the device

into the corresponding slot of the base plate.

2Cautiously incline the device in a horizontal position and assemble

the device over the base with the screws (8 pcs) from the bottom of

the base.

3. Door Sensor, Exit Button & Alarm Connection

4. Access Control Device Connection

5. Quick Start

User Registration Management Verification View records

Registration

Device Registration:

Tap Menu > Staﬀ Management> New Staﬀ for new user registration.

Enter the mandator y registration details (ID, First name, Face

registration) and then tap Next to select the veriﬁcation mode (face,

ﬁngerprint, access card number (RFID card).

Set the IP address and the cloud service server address on the

device before registering into the software.

Biotime Software Registration:

1. If the device is set with server address and port number the

device will be automatically added to the software.

2. Click Personnel > Employee > Add to register users.

3. Click Device > Data Transfer >Sync Data to Deviceto

synchronize all data.

ZKBioSecurity Software Registration:

1. Click Attendance > Device > Search Device to add the device

tothe software.

If the device has set the server address and port, it can be added

automatically.

2. Click Personnel > Person > New to register users.

3. Click Attendance > Device >Device control> Synchronize All

Data to Devices.

For more details, please refer to the ZKBioSecurity User Manual or

BioTime User Manual.

Software Registration :

Wall Mount Face Kiosk-H13A

The recommended height of the device

camera from the ground is 155cm and the

recommended distance from the person to

the equipment is 50cm (applicable height

range 150cm-180cm). If the height is not

within this range, the front and rear positions

can be moved accordingly.

Mobile Phone Registration:

Scan the QR Code using the mobile phone and register the face.

aAdvised to set up or install the device terminal at the indoors

without sunlight interference.

bRecommended recognition distance:

Note: Only the super administrator is entitled to access the main menu

of the system.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels ZKTeco Contrôleurs d'accès IP

ZKTeco

ZKTeco Horus Manuel utilisateur

ZKTeco

ZKTeco Atlas Bio Series Manuel utilisateur

ZKTeco

ZKTeco BioPro SA30 Manuel utilisateur

ZKTeco

ZKTeco SpeedFace-V3L Manuel utilisateur

ZKTeco

ZKTeco C5S120 Manuel utilisateur

ZKTeco

ZKTeco F19 Manuel utilisateur

ZKTeco

ZKTeco FaceDepot-7BL Manuel utilisateur

ZKTeco

ZKTeco MB20-VL Manuel utilisateur

ZKTeco

ZKTeco UR10RWF Manuel utilisateur

ZKTeco

ZKTeco C3 Pro Manuel utilisateur

ZKTeco

ZKTeco EFace10 Manuel utilisateur

ZKTeco

ZKTeco SpeedFace M1 Manuel utilisateur

ZKTeco

ZKTeco ProBio Manuel utilisateur

ZKTeco

ZKTeco F17 Manuel utilisateur

ZKTeco

ZKTeco KF1000 Series Manuel utilisateur

ZKTeco

ZKTeco FaceKiosk-H10A Manuel utilisateur

ZKTeco

ZKTeco MiniAC Plus Manuel utilisateur

ZKTeco

ZKTeco ProFace X Series Manuel utilisateur

ZKTeco

ZKTeco VF Series Manuel utilisateur

ZKTeco

ZKTeco ProBio Manuel utilisateur

ZKTeco

ZKTeco IN710 Manuel utilisateur

ZKTeco

ZKTeco SF1005-V+ Manuel utilisateur

ZKTeco

ZKTeco SpeedFace-V5L Manuel utilisateur

ZKTeco

ZKTeco F19 Manuel utilisateur

Manuels Contrôleurs d'accès IP populaires d'autres marques

Jantar

Jantar REX A-1-9 Manuel utilisateur

2N Access Unit Feuille d'instructions

Kedacom

Kedacom KSCA120 Series Manuel utilisateur

H3C

H3C WX2880X Manuel utilisateur

G4S

G4S S870-EX Mode d’emploi

PRASTEL

PRASTEL M2000PE Manuel utilisateur

Allegion

Allegion interflex IF-281 Cylinder Manuel utilisateur

TECOM

TECOM TS1067E Manuel utilisateur

Fermax

Fermax Memokey 100C Guide de l'utilisateur

Fermax

Fermax CITYLINE MEMOKEY Mode d’emploi

Software House

Software House iSTAR Pro 2U RM Mode d’emploi

AKCP

AKCP SP+ Manuel utilisateur

Bpt

Bpt HNA/102 Manuel utilisateur

Civintec

Civintec CV9601T-T-1F Manuel utilisateur

BioMax

BioMax N-X90W Manuel utilisateur

FingerTec

FingerTec s-Kadex Manuel utilisateur

H3C

H3C WX5002ACCESSCONTROLLER Manuel utilisateur

C Prox Ltd

C Prox Ltd DPN-2 Manuel utilisateur