XtendLan DPK-242 Manuel utilisateur

DPK-242

Single family video intercom

2-wire system

User’s Guide

FEATURES

■SIMPLE 2-WIRE CONNECTION, NO POLARITY

■15 CHORD TUNES SELECTABLE

■DIRECTLY CONNECTING UP TO 4 EXTENDED MONITORS

■INTERCOM FUNCTION WHEN MULTI MONTIORS INSTALLED

■LATCH CONNECTED WITH MONITOR

DPK-242 User's manual

www.xtendlan.com

PARTS

AND

FUNCTIONS

1.1 Indoor Monitor

1. Screen

2. Blue LED Indicator

3. Extended Monitor Connection

4. Function Buttons

5. DC-IN socket

6. Outdoor Station Connection (Main)

7. Image adjustment

8. Cover

9. Wiring Terminals for Extended Monitors

10. Wall Mounting bracket

Accessory fittings: Bracket (Three 4X25 screws are needed for fastening the Mounting

Bracket). Special 4 core cable to connect with Monitor for connecting extended Monitors.

Use special 2 core cable to connect Outdoor Station.

Installation steps: The installation height of Indoor Monitor, usually from 145 to 160CM,

then fix the bracket on 86 Installation Box or wall surface directly, then install the

Monitor.

The design and specifications can be changed without notice to the user.

Right to interpret and copyright of this manual are preserved.

DPK-242 User's manual

www.xtendlan.com

1.2 Outdoor Station

1 5

3 W1 W2

4 6

1. Camera

2. Speaker

3. Call Button

4. Microphone

Mount Instruction:



Fix mounting bracket

with screw at

recommended height

(normally at

145~160CM, and 4X25

self- taping screw are

recommended).



Wire the cable to

terminals, and test

system until it works.



Fix body with bracket,

then tight the screw

firmly.

5. Connection Terminals

6. Mounting hood

DPK-242 User's manual

www.xtendlan.com

Operation

Instructions

■Operation for Basic Video Doorphone

1) When visitor presses the Call Button on the Outdoor Station, the Monitor rings, at

the same time, the screen displays the visitor image.

2) When press TALK Button, you can talk with the visitors for 90 seconds; During the

talk state, press TALK again to end. If nobody answers the phone, the screen will

turn off after 30 seconds automatically. If the system connects two or more Monitors,

and when the TALK Button is pressed in one Monitor, the other Monitors will

automatically shut off.

3) When the Monitor is in standby, press Monitor Button, the screen will display the

view of the Door Station; press TALK Button you can speak to the Door Station; if

wait 30 seconds or press Monitor Button again, the screen turns off.

4) Press Unlock Button to release the Electronic Latch during monitoring or talking.

5) Adjust the two image adjustment potentiometers to change contrast and brightness.

6) Adjust the volume potentiometer on the back of the monitor to change volume level.

■Selection of Chord Melody

1) When Monitor is standby, press CHORD Select Button and hold 2 seconds, until it

enters Chord melody selection state and plays current melody.

2) Press CHORD Select Button again to select preferred chord melody sequentially,

one more time Chord Select Button is pressed, next melody is switched and played.

3) Press any other button to confirm melody selection; if wait 30s and no Button

pressed, Monitor will exit Chord melody selection state.

■Operation for Intercom

1) When system is connected with multi Monitors, intercom is available.

2) Intercom calling can be initiated by any Monitor. Press INTERCOM button, LED

will be lighten, and the other Monitors will ring. If TALK Button is pressed on the

called Monitor, the intercom talking is connected.

3) If INTERCOM Button is pressed, and no Monitor answers, you can press the TALK

Button to cancel or it will exit automatically after 30 seconds.

4) Intercom function is prior to monitor function, but calling function is always the

first.

DPK-242 User's manual

www.xtendlan.com

SYSTEM

WIRING

3.1. Connecting Outdoor Station

It’s recommended to use RVV 2x0.5mm2 non-shielded Cable to connect Outdoor station.

3.2. Connecting Electronic Latch (Dry contact mode)

POWER

SUPPLY

Monitor

Note 1: Latch is connected with Monitor.

Note 2: Terminal 1&2 are Normally-Open contact, 2&3 are Normally-Closed contact.

Note 3: Extra power supply for latch should be installed, and nearly all kinds of electronic

latch can be used, and in this mode, you can continue talking and monitoring during

unlock.

DPK-242 User's manual

www.xtendlan.com

3.3 Connection of Extended Monitors

Indoor Monitor is capable of connecting multi extended Monitors.

First, connect the cable in the mount bracket, then connects the JS-VP port with the

monitor by using 4 core cable (which is Interconnection Cable in following diagram).

Extended wiring terminals are described as below:

1R Power positive. +12V present when outdoor station calling or being

supervised.

2W Power negative (GND)

3Y Image signal (Video signal)

4B Talk and control signal

It’s recommended to use RVVP 4x0.3mm2 shielded cable. And when distance is over 50m,

we suggest to use additional coax cable RG-59 (or 3C-2V) to connect 3Y and 2W.

Note 1: JP-VD is used for setting the video impedance. When there is only one indoor

monitor, keep the jumper (which is already on JP-VD). But when multi monitors are

installed, be sure of taking away all JP-VD of monitors except only the last monitor.

DPK-242 User's manual

www.xtendlan.com

PRECAUTIONS

1) All parts should be protected from violence vibration. And not allow be

impacting, knocking and dropping.

2) For clean the Lens& Screen, using hands or wet cloth is forbidden.

3) Please do the cleanness with soft cotton cloth, please do not use the organic

or chemical clean impregnate. If necessary, please use a little pure water or

dilute soap water to clean the dust.

4) Image distortion may occur if the video door phone is mounted too close

to magnetic field e. g. Microwaves, TV, computer etc.

5) Please keep away the video door monitor from wet, high temperature, dust,

and caustic and oxidation gas in order to avoid any unpredictable damage.

DPK-242 User's manual

www.xtendlan.com

Table des matières

Autres manuels XtendLan Système d'interphone

XtendLan

XtendLan DPC-518ID Manuel utilisateur

XtendLan

XtendLan DPP-D202 Manuel utilisateur

XtendLan

XtendLan DPC-434 Series Manuel utilisateur

XtendLan

XtendLan DPC-D241-1 Manuel utilisateur

XtendLan

XtendLan DPC-D244-K Manuel utilisateur

XtendLan

XtendLan DPA-D2-GSM Manuel utilisateur

XtendLan

XtendLan PM-IP-701TMD Manuel utilisateur

XtendLan

XtendLan DPC-D218ID Manuel utilisateur

XtendLan

XtendLan DPC-D247 Manuel utilisateur

XtendLan

XtendLan DPC-W110-ID Manuel utilisateur

XtendLan

XtendLan DPC-D268 Manuel utilisateur

XtendLan

XtendLan GSM DPC-G100 Manuel utilisateur

XtendLan

XtendLan DPC-D250 series Manuel utilisateur

XtendLan

XtendLan DPC-D244-R Manuel utilisateur

XtendLan

XtendLan DPC-IP100 Manuel utilisateur

XtendLan

XtendLan DPP-D203 Manuel utilisateur

XtendLan

XtendLan DPM-D271TMD Manuel utilisateur

XtendLan

XtendLan DT607 Series Manuel utilisateur

XtendLan

XtendLan DPM-IP700 Manuel utilisateur

XtendLan

XtendLan DPM-D2101TMD Manuel utilisateur

XtendLan

XtendLan DPM-571 Manuel utilisateur

XtendLan

XtendLan DPC-441 Manuel utilisateur

XtendLan

XtendLan DPM-535 Manuel utilisateur

XtendLan

XtendLan DPK-W100 Manuel utilisateur

Manuels Système d'interphone populaires d'autres marques

Bticino

Bticino LINEA 3000 Manuel utilisateur

MSI

MSI MSI-140 Manuel utilisateur

golmar

golmar Stadio Plus Manuel utilisateur

CyberData

CyberData 011211 series Manuel

Vidos

Vidos duo M1021 Manuel utilisateur

Vimar

Vimar ELVOX 7539/E Manuel utilisateur

SSS Siedle

SSS Siedle BTSV 850-03 Manuel utilisateur

Dahua

Dahua VTO Series Manuel utilisateur

Elvox

Elvox 5651 Manuel utilisateur

Videx

Videx VIDEOKIT Series Manuel utilisateur

Rocom

Rocom Doortello Business FW T2.05W2.04 Manuel utilisateur

Viking

Viking E-35-EWP Manuel utilisateur

Safeguard Supply

Safeguard Supply LRA-EX1000 Manuel utilisateur

SSS Siedle

SSS Siedle BFCV 850 Series Manuel utilisateur

GRD

GRD MAX V2 Manuel utilisateur

Alecto

Alecto ADI-250 Manuel utilisateur

Aiphone

Aiphone IE-8MD Manuel utilisateur

Perel

Perel EDB4 Manuel utilisateur