XtendLan DPP-D202 Manuel utilisateur
DT-DJ4A
User Manual
Read this manual carefully before using the product, and keep it well for future use.
L
2
2). Pick up handset in standby mode, each time you press K4 to replace a group of ring
tones. Four groups ring tones cycle:
Group1 Group2 Group3 Group4.
press K4 press K4 press K4
press K4
3). Put down handset to exit the setting.
5.4 Ring Volume Setting
1)There are three kinds of ring volume(low-range, mid-range and high-range) to choose
for you.
2). Pick up handset in standby mode, each time you press K3 to replace a kind of ring
volume. Three kinds of ring volume cycle:
Low-range Mid-range High-range
press K3 press K3
press K3
3). Put down handset to exit the setting.
Power Supply: DC24V
Power Consumption: standby 2.1mA,working 75.9mA
Wiring: 2 wires, non-polarity
Dimension: 187(H)X97(W)X33(D)mm
5.3 Ring Tone Setting
1). There are four groups ring tones to choose for you:
5.2.2 When Bit-3 of DIP2 set to ON, the Bit-1~2 of DIP2 and Bit-1~5 of DIP1 are
used to extended address setting:
123456
ON
Code=33
123
ON
DIP2 state DIP1 state User Code
123456
ON
Code=1
123
ON
123456
ON
Code=2
123
ON
.........
123456
ON
Code=31
123
ON
123456
ON
Code=32
123
ON
123456
ON
Code=34
123
ON
.........
123456
ON
Code=63
123
ON
123456
ON
Code=64
123
ON
.........
.........
123456
ON
Code=65
123
ON
123456
ON
Code=66
123
ON
123456
ON
Code=95
123
ON
123456
ON
Code=96
123
ON
123456
ON
Code=97
123
ON
123456
ON
Code=98
123
ON
123
ON
123456
ON
Code=127
123
ON
123456
ON
Code=128
DIP2 state DIP1 state User Code
Group name Items Songs
Group1
Door Station DINGDONG
Intercom Call TELEPHONE_RING
Door Bell DINGDONG
Group2
Door Station JINGLE_DELL
Intercom Call CARMAN
Door Bell FOR_ALICE
Group3
Door Station HAPPY_BIRTHDAY
Intercom Call SONATINE
Door Bell CONGRATULATE
Group4
Door Station DOREME
Intercom Call RHYTHM_OF_THE
Door Bell EDELWEISS
1. Parts and Functions
2
33
Side View
187
150
97
Handset
Call button/Unlock 2nd button
Speaker
handset curve
Unlock button
Handset Pick up to communicate with visitor.
Handset curve Connect handset with monitor.
Unlock button Press to release the door.
Call button/Unlock
2nd button
In standby mode, pick up handset, then press Call button to
activate the inner call;
During calling/talking state, press Unlock 2nd button to re-
lease the second door.
Speaker Send out voice from the visitor.
Key functions
5.2 Slave Address Or Extended Address Setting(DIP2 to set it)
When multi Monitors are installed in one apartment, these Monitors have to use the
same User Code setting, and the Master/Slave mode should be set on the Monitor.
Bit-1~2 of DIP2 are used to slave address or extended address setting.
Bit-3 of DIP2 is used to monitor matched setting, When Bit-3 set to ON / OFF, there
are different usages.
Bit state User Code Bit state User Code Bit state User Code
123456
ON
Code=6
123456
ON
Code=17
123456
ON
Code=28
123456
ON
Code=7
123456
ON
Code=18
123456
ON
Code=29
123456
ON
Code=8
123456
ON
Code=19
123456
ON
Code=30
123456
ON
Code=9
123456
ON
Code=20
123456
ON
Code=31
123456
ON
Code=10
123456
ON
Code=21
123456
ON
Code=32
123456
ON
Code=11
123456
ON
Code=22
5.2.1 When Bit-3 of DIP2 set to OFF, the Bit-1~2 of DIP2 are used to master/slave
address setting:
DIP2 state Master/Slave type
123
ON
Master monitor
123
ON
Slave monitor 1
123
ON
Slave monitor 2
123
ON
Slave monitor 3
4. Operation Instructions
5. Setup Instructions
1) Door release function: When visitor calls from outdoor station, the monitor rings,
pick up handset to talk with the visitor, then press the Unlock button to open the door.
If the system connect 2 locks,press Unlock 2nd button to open the second door.
2) Inner call: Pick up handset, then press CALL button to activate the inner
call,all monitors connected to the system will ring at the same time. Pick up any
monitor,the others will stop ringing immediately.(note that the user code must be the
same for all monitors to activate the inner call function)
3) Door Bell Call Button: Additional door bell call button can be connected to the
Monitor, so that the visitors can ring the door bell again in front of the user’s apartment.
When the call button is pressed, the Monitor will output ring tones.
5.1 User Code Setting(DIP1 to set it)
!"#$
Bit-1~5 of DIP1 are used to User Code setting. The value is from 1 to 32, which
have 32 different codes for 32 apartments.
Bit-6 of DIP1 is used to video match.
Bit state User Code Bit state User Code Bit state User Code
123456
ON
Code=1
123456
ON
Code=12
123456
ON
Code=23
123456
ON
Code=2
123456
ON
Code=13
123456
ON
Code=24
123456
ON
Code=3
123456
ON
Code=14
123456
ON
Code=25
123456
ON
Code=4
123456
ON
Code=15
123456
ON
Code=26
123456
ON
Code=5
123456
ON
Code=16
123456
ON
Code=27
2. Terminal Descriptions
L2 L1
SW+SW-
1 2 3 4 5 6
ON DIP
ON
1 2 3
K4
K3
K4
K3
DIP2
DIP1
L2 L1
SW+SW-
1 2 3 4 5 6
ON DIP
ON
1 2 3
K4
K3
SW+,SW-
L1, L2
SW+,SW-:Door bell call button connection port.
L1,L2:Bus terminal.
K4:Used to Ring Tone setting.
K3:Used to Ring Volume setting.
DIP1(Bit1~6):Used to User Code setting.
DIP2(Bit1~3):Used to Slave Monitor Address or Extended Address setting.
3. Unit Mounting
2
2
1). Fix 2 screws to the wall at a appropriate height;
2). Connect the system correctly;
3). Attach the audio phone to the bracket.
Table des matières
Autres manuels XtendLan Système d'interphone
XtendLan
XtendLan DPC-536 Manuel du propriétaire
XtendLan
XtendLan DPC-D241-1 Manuel utilisateur
XtendLan
XtendLan DPA-D2-GSM Manuel utilisateur
XtendLan
XtendLan PM-IP-701TMD Manuel utilisateur
XtendLan
XtendLan DPC-D244-K Manuel utilisateur
XtendLan
XtendLan DPC-434 Series Manuel utilisateur
XtendLan
XtendLan DPM-D271TMD Manuel utilisateur
XtendLan
XtendLan DPK-W100 Manuel utilisateur
XtendLan
XtendLan DPM-473AD Manuel utilisateur
XtendLan
XtendLan DPP-D203 Manuel utilisateur
XtendLan
XtendLan DPC-D246A Manuel utilisateur
XtendLan
XtendLan DPC-441 Manuel utilisateur
XtendLan
XtendLan DPC-D248-R Manuel utilisateur
XtendLan
XtendLan DPC-IP101ID Manuel utilisateur
XtendLan
XtendLan DPK-242 Manuel utilisateur
XtendLan
XtendLan DT607 Series Manuel utilisateur
XtendLan
XtendLan DPC-D250 series Manuel utilisateur
XtendLan
XtendLan DPM-451 Manuel utilisateur
XtendLan
XtendLan DPC-511 Manuel utilisateur
XtendLan
XtendLan DPG-IP-G21 Manuel utilisateur
