X-Vision XC960VV Manuel utilisateur

Professional HD 960H Vandal Resistant

Eyeball Dome Camera

User Manual

Version 1

Thank you purchasing the XC960VV camera from Xvision.

Please ensure that you read and understand this User Guide before operating the camera.

Please store this User Guide in an easily accessible location.

HD 960H

XC960VV

HD 960H

www.xvision.com

Contents

1. Product Overview .................................................................................. 4

1.2 Package Contents .......................................................................... 4

2. Installaon ............................................................................................ 5

3. How to Operate the Camera .................................................................. 7

4. Camera Menu ........................................................................................ 8

4.1 Lens ............................................................................................... 8

4.2 Exposure ....................................................................................... 8

4.3 White Balance ............................................................................... 8

4.4 Backlight ........................................................................................ 9

4.5 Day/Night ...................................................................................... 9

4.6 DPC ................................................................................................ 10

4.7 Special ........................................................................................... 10

5. Specicaons ........................................................................................ 12

XC960VV

HD 960H

www.xvision.com

Safety Precauons

1. Do not install the equipment in an environment with too much moisture, dust or smoke dust as this

may result in re or electric shock.

2. In the unlikely event that the equipment should malfuncon and emit an abnormal smell or smoke,

please immediately stop it, shut o the power and contact your supplier.

3. Please do not place this equipment near a heat source to avoid risk of re.

4. Please do not store, install and use this product in danger areas with inammable or explosive

substances.

5. Please make sure the power is turned o when installing the product.

6. Please ensure that you install the camera in an area with good venlaon.

7. When installing the camera, please make sure that it does not face any objects giving out strong lights

as this will damage the CCD of the camera.

8. Please do not use the camera in an environment where temperatures exceed either -20°C to +55°C.

XC960VV

HD 960H

www.xvision.com

Thank you for purchasing the HD 960H XC960VV from Xvision. Please read through this manual carefully

and make sure you understand before operang the camera.

1.1 Features

• Up to 30-40m Smart IR Night Vision

• Sony 960H CCD Sensor

• Xvision X3K DSP

• Xvision 2.8 to 12mm HD Megapixel Auto Iris Lens for viewing angle between 23 to 92°

• Advanced Wide Dynamic Range

• High Speed Digital Slow Shuer

• 3D Digital Noise Reducon

• Programmable High Light Suppression

• Vandal Resistant

• Designed for Wall or Ceiling Mount

• Waterproof to IP66

1.2 Package Contents

The packaged box for the XC960VV comes with the following items:

• XC960VV Camera

• Screws / Wall Plugs

• Allen Key

• DC Plug with screw terminals

• User Manual

Should any of these items be missing, please contact your local distributor.

1. Product Overview

XC960VV

HD 960H

www.xvision.com

1. Product Overview

2. Installaon

The XC960VV camera can be wall or ceiling mounted. To install the camera, please follow the steps below.

1. Unscrew the base of the camera by

holding the boom and moving the ring

an-clockwise.

2. Use the camera base as a template and mark

out the holes in the wall/ceiling where you wish

to install the camera.

3. Get the correct drill bit for the type of wall you

are drilling, then drill the holes in the wall and

insert the wall plugs into the holes.

4. Take the base and feed through the camera

wires. (You can drill a hole through the centre of

the base and feed the wires through the

wall/ceiling. But for this example we have just fed

through the base for the cable to be external).

5. Screw the camera base into the wall or ceiling. 6. Screw the bracket and camera back onto the

base by turning the ring clockwise. Please don’t

ghten completely if you wish to change the

camera angle.

XC960VV

HD 960H

www.xvision.com

7. Adjust the camera angle to the desired view.

It would be advised to use a test monitor when

choosing the angle, to get the perfect angle for

your applicaon.

9. Finally, ghten the bracket, and secure using the

thread screws provided in the installaon pack.

8. You can adjust the focus and zoom on the

camera using the tool provided. To adjust, simply

turn the screw marked ‘focus’ or ‘zoom’ to adjust

the view. Insert the tool into the slots on the face

of the camera.

XC960VV

HD 960H

www.xvision.com

1. Product Overview

3. How to Operate the Camera

To operate the camera, rstly you will need to connect the BNC and DC sockets to the BNC and DC sockets

of a power supply and DVR or Monitor. If you wish to extend the cables, you can connec the DC and BNC

Sockets to the BNC/DC of a PNP cable/RG59 cable.

You can then connect the DC socket to a 12V DC Power Supply and the BNC socket to back of your

compable DVR or monitor.

BNC Socket for

video

DC Socket for

power

Joysck for entering camera

menu and navigang opons

1. Product Overview

4. Camera Menu

To access the camera menu, when the camera is on press the joysck buon in. When the menu has

appeared, you will be presented with the following opons:

• Lens

• Exposure

• White Balance

• Backlight

• D/N (Day/Night)

• DPC

• Special

Le

Down

Right

XC960VV

HD 960H

www.xvision.com

4.1 Lens Opon: DC / Manual

Select the lens type from either DC or Manual. Use the joysck to navigate between the opons and

when on the desired opon, press the joysck in to select. Both opons have a sub-menu as follows:

DC: Brightness - adjust the brightness of the image between

0-255. Iris Speed - adjust the iris speed between 0-255.

Manual: Brightness - adjust the brightness of the image

between 0-255.

Return: Save / End and return to the previous menu.

4.2 Exposure Opon: Shuer / AGC / DWDR

The exposure menu allows you to adjust the shuer speed, Automac Gain Control (AGC) and the Digital

Wide Dynamic Range (DWDR) on the camera.

Shuer: Adjust the shuer speed to auto or choose from

the following shuer speeds (1/25, FLK, 1/50, 1/100, 1/2000,

1/5000, 1/10000).

AGC: Adjust the AGC to either Auto, Low, Middle or High.

DWDR: Turn the DWDR on or o. If you choose to turn it on,

you can adjust the sensivity level (0-63).

Return: Save / End and return to the previous menu.

4.3 White Balance Opon: AWB / ATW / An CRL / Manual

Adjust the White Balance and set the Automac White Balance (AWB), ATW, An Colour Rolling (An CRL)

and choose to set the white balance manually.

AWB: Set the white balance to Automac

ATW: Turns this funcon on so the camera will detect

the colour temperature automacally.

An CRL: Turn on the an colour rolling funcon

Manual: Set the white balance to manual. If this opon is

chosen, you will need to adjust the colour temperature.

To do this, adjust the colour temperature from Manual, Indoor

or Outdoor. In each of these opons you will need to

set the blue and red gain.

Return: Save / End and return to the previous menu.

XC960VV

HD 960H

www.xvision.com

4.5 Day/Night Opon: D&N Auto / B&W / EXT / Colour

Day/Night: Set the camera to Day/Night mode. When selected, you can set the Day/Night mode to Auto,

Black and White, EXT or Colour.

D/N Auto: When choosing Auto you can adjust the lux

level from which the camera will switch from day to

night mode (0-255) and the delay from when the

camera reaches that lux level to turn to night mode

(0-30). You can also do this from night to day.

B/W: When choosing B/W you will put the cameras

image to black and white. You can also choose to turn

on the burst funcon, turn on the IR Smart and set

the IR level.

EXT: Choose the EXT funcon to set the day to night

funcon to be decided by external signals, for example

IR LEDs. Set the delay to (0-30 seconds) and night to

day funcon delay (0-30 secs).

Colour: Set the camera’s image to colour.

Return: Save / End and return to the previous menu.

4.4 Backlight Opon: O / BLC / HLC

This opon allows you adjust the advance backlight sengs, giving the following opons; Backlight

Compensaon (BLC), Highlight Compensaon (HLC), Day/Night, Black & White mode, EXT and Colour

Mode.

BLC: Select this opon to allow objects in front of

bright lights to be seen clearer, by making the background

darker. Once selected, you will be presented with a

further 2 opons; area select and state. Select the area gain

control (30-255), Height, Width (both 0-13), Le/Right

and Top/Boom (Both 0-5). You can also turn the state

on or o.

HLC: Select this opon to mask bright areas in an image,

for example, car headlights. Once selected, you can set the

sensivity level (0-240), set HLC to All Day or Mask Skip.

If you select Mask Skip, you can set the height, width,

le/right and top/boom of the masked areas between

0-15 values.

XC960VV

HD 960H

www.xvision.com

4.6 DPC Opon: Start / DPC View / LS Value / Di / Area

Start: Once selected, you will be asked to cover the lens

and press the joysck in. Please note that this is for

factory use only, if iniated power the camera down

and then power the camera to back up.

DPC View: Turn the DPC View on or o.

LS Value: Set the shuer value for searching dead pixels

Di: Set the di. value for searching dead pixels

Area: Set the area of the DPC. There are areas to

adjust; HS, HE, VS and VE (0-255).

Return: Save / End and return to the previous menu.

4.7 Special Opon: Camera Title / Moon / Privacy / Park Line / Image Adjust

Cam Adjust / Display ID / Language / Version

The special opon allows you to adjust various sengs on the camera from camera tle, privacy masking,

moon detecon and language etc.

Camera Title: Turn the camera tle on or o. When choosing on,

you will be presented with an on screen keyboard to set the

camera tle. Move the joysck to navigate between the

leers/numbers and then press the joysck in to conrm

selecon.

Moon: Turn the moon detecon funcon on or o.

If set to on, you will be presented with the following opons:

Area Select: Select 1-4 areas

Area State: Turns the selected moon zone on or o

Height: 0-50

Width: 0-50

Top: 0-50

Boom: 0-50

Degree: 0-255

View: On or o

Privacy: Turn the privacy funcon on or o. If set to on, you

will be presented with the following opons:

Area Select: Select 1-8 areas

Area State: Turns the selected privacy zone on or o

Height: 0-255

Width: 0-255

Le/Right: 0-255

Top/Boom: 0-255

Colour: 0-15 - choose between 15 colour opons to show the masked areas.

Table des matières

Autres manuels X-Vision Caméra de sécurité

X-Vision

X-Vision XC960VA Manuel utilisateur

X-Vision

X-Vision XSD27ZDN2 Manuel utilisateur

X-Vision

X-Vision XP1080S20 Manuel utilisateur

X-Vision

X-Vision XSD27ZIR-2 Manuel utilisateur

X-Vision

X-Vision VIS249D-2 Manuel utilisateur

X-Vision

X-Vision X100 Series Manuel utilisateur

X-Vision

X-Vision XIR621 Manuel utilisateur

X-Vision

X-Vision XC960T Manuel utilisateur

X-Vision

X-Vision XSD27ZIR Manuel utilisateur

X-Vision

X-Vision XC960S30 Manuel utilisateur

X-Vision

X-Vision PCC422E Manuel utilisateur

X-Vision

X-Vision CVR811 Manuel utilisateur

X-Vision

X-Vision VIS430R Mode d’emploi

X-Vision

X-Vision XPD700W-2 Manuel utilisateur

X-Vision

X-Vision XP3000B Manuel utilisateur

X-Vision

X-Vision XPD721WIR Manuel utilisateur

X-Vision

X-Vision XIR501 Manuel utilisateur

X-Vision

X-Vision XP1080S20 Manuel utilisateur

X-Vision

X-Vision XHC1080VB Manuel utilisateur

X-Vision

X-Vision XSD27ZDN Manuel utilisateur

X-Vision

X-Vision XPD700WIR-2 Manuel utilisateur

X-Vision

X-Vision VIS249DX Manuel utilisateur

X-Vision

X-Vision VIS338DX-3 Manuel utilisateur

X-Vision

X-Vision XPD621 Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur