X-Vision XSD35ZDN Manuel utilisateur
Model: XSD35ZDN
Colour 550 TVL 560x Zoom
Speed Dome Camera
CCTV
Model:
XSD35ZDN
Colour 550 TVL 560x Zoom
Speed Dome Camera
Before you begin
•Please unpack the box carefully and identify that all the parts are present.
•Do not cut the cables, this will void the warranty.
•Make sure you use only the recommended power supply.Damage caused to the unit by
incorrect voltage or wiring is not covered by the warranty.
USER MANUAL
Contents
1. Safety Precautions.................................................................................................... 2
2. Symbol Description.................................................................................................. 3
3. Features.................................................................................................................... 4
4. Contents................................................................................................................... 5
5. Component and Structure Description ................................................................... 6
6. Camera Setting........................................................................................................ 7
7. Camera Mounting Options ..................................................................................... 11
8. System Installation ..................................................................................................12
9. Operation ................................................................................................................ 13
10. MENU Operational Description............................................................................. 16
11. Quick Reference Table .......................................................................................... 18
12. Quick Reference Table............................................................................................ 19
13. Troubleshooting...................................................................................................... 20
14. Specifications ........................................................................................................ 21
The author assumes no responsibility for any errors or omissions that may appear in this
document nor does the author make a commitment to update the information herein.
2
WARNING: This symbol is intended to alert the user to the presence of un-insulated “
dangerous voltage”.
CAUTION: This symbol is intended to alert the user to presence of important operating
and maintenance (Servicing) instructions in the literature accompanying the appliance.
Disposal of Old Electrical & Electronic Equipment (Applicable in the European
Union and other European countries with separate collection systems).
This symbol on the product or on its packaging indicates that this product shall not be
treated as household waste. Instead it shall be handed over to the applicable collection
point for the recycling of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate waste
handling of this product. The recycling of materials will help to conserve natural
resources. For more detailed information about recycling of this product, please contact
your local city office, your household waste disposal service or the shop where you
purchased the product.
Do not install the product in an environment where the humidity is high. Unless the product is
waterproof or weatherproof, otherwise poor image quality may occur.
Please take extreme care when cleaning the dome surface. The plastic material that the dome is
made of is,by necessity, relatively soft and prone to nicks and scratches which will impair vision
through the dome.
Do not plug and unplug the power cord, it may result product malfunction.
Make sure to use only the power source specified in the specification.
Before operation, please make sure that the product has been properly installed.
1. Safety Precautions
3
It is advised to read the Safety Precaution Guide through
carefully before operating the product, to prevent any
possible danger.
1. Keyboard function keys are shown by, framed BOLD CAPITAL letters.
Example: ENTER ,AUTO FOCUS , etc.
2. Function key “+” indicates the order sequence.
Example: 28+ ENTER meaning, press the function key “ 2“,
“ 8”, and then ENTER .
3. Indicate messages from the device and is shown on the control keyboard LCD
display.
4. “n” indicates the ID number of the nth device (ID numbers ranges from 001~127).
2. Symbol Description
4
DEVICE 001:_
lSpeedy response with 35x continuous
auto-focus zoom lens and 16x Electronic
Zoom.
lDay & Night (IR Cut Filter Change
Mechanism).
lAuto Iris and Manual Iris Control.
lAdvanced DSP Camera, including Auto White
Balance, Backlight Compensation and Auto
Iris Control.
l360° Continuous Pan Rotation.
l80 Preset Points Setup.
lAuto pan at preset point.
lPan Speed up to 300°/Sec and Tilt Speed up
to 200°/Sec.
lHorizontal Rotation of 180°.
lBuilt in 6 Alarm Inputs and one Relay
Output.
lTwo types of Alarm out signal are provided:
NO and NC.
lRemote Control via RS-485.
lConnects up to 127 Speed Dome Cameras.
lSupports PELCO Protocol (D and P Protocol).
lPC control software is applicable.
lAC24V or DC12V Power Input.
lBuilt-in heater device and fan to maintain
camera in normal operating temperature.
lInstallation Option: Wall Mount/ Pendant
Mount/ Corner Mount
lWeatherproof to IP66.
3. Features
5
6
DC12V TYPE
1. DC Adaptor (x1)
2. Power Line (x1)
3. Power Connector (x1)
4. Speed Dome (x1)
5. Speed Dome Cover (x1)
4. Contents
1. Wall Mount Bracket/ Ceiling Mount Bracket/ Corner Mount Bracket
2. Machine Housing
3. Transparent Cover
4. ID Number/ Protocol/ Baud Rate Setting
5. Alarm Input or Output / Video Output / Power Input Terminal
5. Component and Structure Description
7
Wall Mount
Ceiling Mount
Corner Mount
8
**
**
SW1: ID Number Setting
Connection of up to 127 Speed Dome
Cameras, each camera has its own ID
Number.
Setting 000, then the image display will show: DEVICE N/A.
Does not affect setup.
DIP Switch setting, shown below:
6. Camera Setting
9
Settings
Switch Number
1 2 3 4
Off Off Off Off
On Off Off Off
Off On Off Off
On On Off Off
Baud Rate
9600 BPS
4800 BPS
2400 BPS
19200 BPS
*BOLD: Default Settings
SW2: Protocol Settings
SW2: Baud Rate Settings
Settings
Switch Number
5 6 7 8
Off Off Off Off
On Off Off Off
Off On Off Off
On On Off Off
Protocol
NATIVE
PELCO
Reserved
Reserved
* Speed Dome automatically detects the type of PELCO Protocol. No switch settings are
required to set D and P Protocols.
* BOLD: Default Settings.
10
Terminal base Connection, Data Line, and Signal Line Regulation
1. Power Input Terminal
DC 12V Input and power consumption of 2.5A.
AC 24V Input and power consumption of 2.2A.
Video Output Terminal
Video Signal Output: CVBS 1.0 Vp-p 75 Ohms BNC.
2. Alarm Input/ Output Terminal
Each Speed Dome camera is equipped with 6 external alarm inputs and 2 sets of alarm outputs
(1 set NO and 1 set NC). Alarm Input voltage: 5.6V max and Alarm Output Specification: 0.35A
120V AC/ 0.5A 24V AC.
3. Communication Control Input/ Output Terminal
RS-485 Input Terminal has two terminal points (D+, D-), using the twisted pair wire to connect
onto the next Speed Dome Camera.
10pin Green Terminal Block
SENSOR/RELAY
PIN No. Definition
1 GND
2 Sensor 1
3 Sensor 2
4Sensor 3
5 Sensor 4
6 Sensor 5
7 Sensor 6
8 NO
9COM
10 NC
4pin Green Terminal Block
RS485 CONNECTOR
PIN No. Definition
1 D-
2 D-
3 D+
4 D+
2pin Green Terminal Power-Input
PIN No. Definition
1 AC24V
2 GND
2pin Green Terminal Power-Input
PIN No. Definition
1 DC12V
2 GND
Table des matières
Autres manuels X-Vision Caméra de sécurité
X-Vision
X-Vision XIR621 Manuel utilisateur
X-Vision
X-Vision VIS249D Manuel utilisateur
X-Vision
X-Vision XSD27ZS Manuel utilisateur
X-Vision
X-Vision XPD721WIR Manuel utilisateur
X-Vision
X-Vision X100 Series Manuel utilisateur
X-Vision
X-Vision XC960DA Manuel utilisateur
X-Vision
X-Vision PC810 Manuel utilisateur
X-Vision
X-Vision PCC422E Manuel utilisateur
X-Vision
X-Vision VIS338D Manuel utilisateur
X-Vision
X-Vision XAM202-208 Manuel utilisateur
X-Vision
X-Vision XPT600 Manuel utilisateur
X-Vision
X-Vision XSD27ZIR-2 Manuel utilisateur
X-Vision
X-Vision XC960BN Manuel utilisateur
X-Vision
X-Vision VIS338DX-3 Manuel utilisateur
X-Vision
X-Vision VIS249D-2 Manuel utilisateur
X-Vision
X-Vision XC960VA Manuel utilisateur
X-Vision
X-Vision XSD27ZS Manuel utilisateur
X-Vision
X-Vision X100 Series Manuel utilisateur
X-Vision
X-Vision VIS200DX-2 Manuel utilisateur
X-Vision
X-Vision XP1080S20 Manuel utilisateur
