X-Vision XC960BN Manuel utilisateur
Professional HD 960H Long Range
IR Bullet Camera - 120m IR Night Vision
User Manual
Version 1
Thank you for purchasing the XC960BN camera from Xvision.
Please ensure that you read and understand this User Guide before operating the camera.
Please store this User Guide in an easily accessible location.
HD 960H
XC960BN
HD 960H
2
www.xvision.com
Contents
1. Product Overview .................................................................................. 4
1.2 Package Contents .......................................................................... 4
2. Installaon ............................................................................................ 5
3. How to Operate the Camera .................................................................. 6
4. Camera Menu ........................................................................................ 6
4.1 Lens ............................................................................................... 7
4.2 Exposure ....................................................................................... 7
4.3 White Balance ............................................................................... 7
4.4 Backlight ........................................................................................ 7
4.5 Day/Night ...................................................................................... 8
4.6 DPC ................................................................................................ 8
4.7 Special ........................................................................................... 8
5. Specicaons ........................................................................................ 10
XC960BN
HD 960H
3
www.xvision.com
Safety Precauons
1. Do not install the equipment in an environment with too much moisture, dust or smoke dust as this
may result in re or electric shock.
2. In the unlikely event that the equipment should malfuncon and emit an abnormal smell or smoke,
please immediately stop it, shut o the power and contact your supplier.
3. Please do not place this equipment near a heat source to avoid risk of re.
4. Please do not store, install and use this product in danger areas with inammable or explosive
substances.
5. Please make sure the power is turned o when installing the product.
6. Please ensure that you install the camera in an area with good venlaon.
7. When installing the camera, please make sure that it does not face any objects giving out strong lights
as this will damage the CCD of the camera.
8. Please do not use the camera in an environment where temperatures exceed either -20°C to +50°C.
XC960BN
HD 960H
4
www.xvision.com
Thank you for purchasing the HD 960H XC960BN from Xvision. Please read through this manual carefully
and make sure you understand before operang the camera.
1.1 Features
• Up to 120m Smart IR Night Vision
• Sony 960H CCD Sensor
• Xvision X3K DSP
• Xvision varifocal 5 to 50mm HD Megapixel Lens for a Viewing Angle between 6 and 49°
• Advanced Wide Dynamic Range
• High Speed Digital Slow Shuer
• 3D Digital Noise Reducon
• Programmable High Light Suppression
• Up to 25m Number Plate Recognion
• Designed for Wall or Ceiling Mount
• Cable Managed Bracket
• Waterproof to IP66
1.2 Package Contents
The packaged box for the XC960BN comes with the following items:
• XC960BN Camera
• Rain Shield
• Test Lead
• Bracket Extension
• Screws
• Allen Key
• DC Plug with screw terminals
• Ceiling Mount Stencil
• User Manual
Should any of these items be missing, please contact your local distributor.
1. Product Overview
1. Product Overview
XC960BN
HD 960H
5
www.xvision.com
1. Product Overview
2. Installaon
The XC960BN camera can be wall or ceiling mounted. To install the camera, you will need to adjust the
bracket to the desired angle whether you would like it to be wall or ceiling mounted.
2. Place the installaon stencil on the desired
installaon area and drill through the stencil holes.
Then insert the wall plugs into the holes.
1. If placing the camera outside, you can screw the
rain shield on the top of the camera (Below) using
the at head screw driver in the installaon pack.
3. If you wish to run the cable through the wall
or ceiling, you will need to drill a hole in the wall/
ceiling for the wires to go through. If outside, you
can run the cable through the bracket as shown
below.
6. To turn the camera 180°, you will need to loosen
the screw holding the bracket to the camera.
5. To adjust the camera angle, loosen the bracket
of the camera with the allen key provided. It would
be advised to use a test monitor when choosing
the angle, to get the perfect angle for your
applicaon.
4. When the holes have been drilled, put the
screws through the holes in the bracket and screw
into the wall.
XC960BN
HD 960H
6
www.xvision.com
1. Product Overview
3. How to Operate the Camera
To operate the camera, rstly you will need to connect the BNC and DC sockets to the BNC and DC sockets
of a power supply and DVR or Monitor. If you wish to extend the cables, you can connect the DC and BNC
Sockets to the BNC/DC of a PNP cable/RG59 cable.
You can then connect the DC socket to a 12V DC Power Supply and the BNC socket to back of your
compable DVR or monitor.
BNC Socket for
video
DC Socket for
power
1. Product Overview
4. Camera Menu
To access the camera menu, rstly unscrew the panel at the rear of the camera by placing a screw driver in
between the grooves and turning. This will expose the buons that are used to control the camera menu.
Turn the camera on and then press the set buon. When the menu has appeared, you will be presented
with the following opons:
• Lens
• Exposure
• White Balance
• Backlight
• D/N (Day/Night)
• DPC
• Special
Up
Le
Down
Right
Use the screw driver to turn the screw that
adjusts the focus of the lens
Spot
Monitor
Output
Turn
screw to
focus
Turn
screw to
Zoom
XC960BN
HD 960H
7
www.xvision.com
4.1 Lens Opon: DC / Manual
Select the lens type from either DC or Manual. Use the joysck to navigate between the opons and
when on the desired opon, press the joysck in to select. Both opons have a sub-menu as follows:
DC: Brightness - adjust the brightness of the image between
0-255. Iris Speed - adjust the iris speed between 0-255.
Manual: Brightness - adjust the brightness of the image
between 0-255.
Return: Save / End and return to the previous menu.
4.2 Exposure Opon: Shuer / AGC / DWDR
The exposure menu allows you to adjust the shuer speed, Automac Gain Control (AGC) and the Digital
Wide Dynamic Range (DWDR) on the camera.
Shuer: Adjust the shuer speed to auto or choose from
the following shuer speeds (1/25, FLK, 1/50, 1/100, 1/2000,
1/5000, 1/10000).
AGC: Adjust the AGC to either Auto, Low, Middle or High.
DWDR: Turn the DWDR on or o. If you choose to turn it on,
you can adjust the sensivity level (0-63).
Return: Save / End and return to the previous menu.
4.3 White Balance Opon: AWB / ATW / An CRL / Manual
Adjust the White Balance and set the Automac White Balance (AWB), ATW, An Colour Rolling (An CRL)
and choose to set the white balance manually.
AWB: Set the white balance to Automac
ATW: Turns this funcon on so the camera will detect
the colour temperature automacally.
An CRL: Turn on the an colour rolling funcon
Manual: Set the white balance to manual. If this opon is
chosen, you will need to adjust the colour temperature.
To do this, adjust the colour temperature from Manual, Indoor
or Outdoor. In each of these opons you will need to
set the blue and red gain.
Return: Save / End and return to the previous menu.
XC960BN
HD 960H
8
www.xvision.com
4.5 Day/Night Opon: D&N Auto / B&W / EXT / Colour
Day/Night: Set the camera to Day/Night mode. When selected, you can set the Day/Night mode to Auto,
Black and White, EXT or Colour.
D/N Auto: When choosing Auto you can adjust the lux
level from which the camera will switch from day to
night mode (0-255) and the delay from when the
camera reaches that lux level to turn to night mode
(0-30). You can also do this from night to day.
B/W: When choosing B/W you will put the cameras
image to black and white. You can also choose to turn
on the burst funcon, turn on the IR Smart and set
the IR level.
EXT: Choose the EXT funcon to set the day to night
funcon to be decided by external signals, for example
IR LEDs. Set the delay to (0-30 seconds) and night to
day funcon delay (0-30 secs).
Colour: Set the camera’s image to colour.
Return: Save / End and return to the previous menu.
4.4 Backlight Opon: O / BLC / HLC
This opon allows you adjust the advance backlight sengs, giving the following opons; Backlight
Compensaon (BLC), Highlight Compensaon (HLC), Day/Night, Black & White mode, EXT and Colour
Mode.
BLC: Select this opon to allow objects in front of
bright lights to be seen clearer, by making the background
darker. Once selected, you will be presented with a
further 2 opons; area select and state. Select the area gain
control (30-255), Height, Width (both 0-13), Le/Right
and Top/Boom (Both 0-5). You can also turn the state
on or o.
HLC: Select this opon to mask bright areas in an image,
for example, car headlights. Once selected, you can set the
sensivity level (0-240), set HLC to All Day or Mask Skip.
If you select Mask Skip, you can set the height, width,
le/right and top/boom of the masked areas between
0-15 values.
XC960BN
HD 960H
9
www.xvision.com
4.6 DPC Opon: Start / DPC View / LS Value / Di / Area
Start: Once selected, you will be asked to cover the lens
and press the joysck in. Please note that this is for
factory use only, if iniated power the camera down
and then power the camera to back up.
DPC View: Turn the DPC View on or o.
LS Value: Set the shuer value for searching dead pixels
Di: Set the di. value for searching dead pixels
Area: Set the area of the DPC. There are areas to
adjust; HS, HE, VS and VE (0-255).
Return: Save / End and return to the previous menu.
4.7 Special Opon: Camera Title / Moon / Privacy / Park Line / Image Adjust
Cam Adjust / Display ID / Language / Version
The special opon allows you to adjust various sengs on the camera from camera tle, privacy masking,
moon detecon and language etc.
Camera Title: Turn the camera tle on or o. When choosing on,
you will be presented with an on screen keyboard to set the
camera tle. Move the joysck to navigate between the
leers/numbers and then press the joysck in to conrm
selecon.
Moon: Turn the moon detecon funcon on or o.
If set to on, you will be presented with the following opons:
Area Select: Select 1-4 areas
Area State: Turns the selected moon zone on or o
Height: 0-50
Width: 0-50
Top: 0-50
Boom: 0-50
Degree: 0-255
View: On or o
Privacy: Turn the privacy funcon on or o. If set to on, you
will be presented with the following opons:
Area Select: Select 1-8 areas
Area State: Turns the selected privacy zone on or o
Height: 0-255
Width: 0-255
Le/Right: 0-255
Top/Boom: 0-255
Colour: 0-15 - choose between 15 colour opons to show the masked areas.
XC960BN
HD 960H
10
www.xvision.com
4.7 Special Connued...
Park Line: Turn the park line funcon on or o. This feature all the user to set on-screen parking lines
for vehicle use. If turned on, you will be presented with the following opons to adjust the parking lines’
posion and width:
LT: 0-255
LB: 0-255
RT: 0-255
RB: 0-255
F: 0-255
N: 0-255
T: 0-15
V1: 0-255
V2: 0-255
V3: 0-255
Image Adjust: The image adjust opons allows you to change various sengs to create the perfect image
for your needs. When entering the image adjust opon, you will be presented with the following
sub-menu.
Lense Shadow: Sets the amount of light available to the lense to provide clearer images. Turn this
funcon and you can alter the light level (0-255), H-centre (0-255) and V-centre (0-255).
2DNR: Turn on to acvate the Dynamic Noise Reducon funcon. When turned on, you can set
the level from 0-255.
Mirror: Provides a mirror reecon (horizontal) of the image. This funcon can be turned on or
o.
Font Colour: Change the font colour for the on-screen display. When turned on you can choose
between 15 colours and the ID/Title of the camera.
Contrast: Adjust the contrast colour (0-255)
Sharpness: Adjust the sharpness of the image (0-255)
Display: Choose the display from LCD, User, CRT or Neg Image. The LCD opon allows you to
adjust Gamma (0.3 - 1.0), Ped Level (0-63) and Colour Gain (0-255). The user opon allows you to
adjust the same opons as LCD and the CRT opon allows you to adjust Ped Level (0-63) and
Colour Gain (0-255).
Com Adjust: This feature is for RS485 sengs. Here you can adjust the baudrate (2400, 4800,
9600), Protocol (Pelco D, Pelco P) and the Cam ID (1-255).
Display ID: Turn the ID of the camera on or o. If set to on, you can choose the on screen posion
of the ID.
Language: Set the language on the camera.
Version: View the current rmware version on the camera.
Return: Save / End and return to the previous menu.
Exit: Exit the menu and go back to camera view. You will be asked to either exit without saving,save the
sengs or reset the camera back to the factory sengs.
Table des matières
Autres manuels X-Vision Caméra de sécurité
X-Vision
X-Vision PC810 Manuel utilisateur
X-Vision
X-Vision XP3000B Manuel utilisateur
X-Vision
X-Vision VIS249D Manuel utilisateur
X-Vision
X-Vision VIS430R Mode d’emploi
X-Vision
X-Vision HD 960H Manuel utilisateur
X-Vision
X-Vision XPD621 Manuel utilisateur
X-Vision
X-Vision XSD27ZIR Manuel utilisateur
X-Vision
X-Vision XHC1080S10IRN Manuel utilisateur
X-Vision
X-Vision X100 Series Manuel utilisateur
X-Vision
X-Vision XIR538 Manuel utilisateur
X-Vision
X-Vision XC960T Manuel utilisateur
X-Vision
X-Vision XSD27ZIR-2 Manuel utilisateur
X-Vision
X-Vision PCC422E Manuel utilisateur
X-Vision
X-Vision XHC1080VB Manuel utilisateur
X-Vision
X-Vision XSD35ZDN Manuel utilisateur
X-Vision
X-Vision VIS200DX-2 Manuel utilisateur
X-Vision
X-Vision XP1080B Manuel utilisateur
X-Vision
X-Vision VIS338DX-3 Manuel utilisateur
X-Vision
X-Vision XSD10Z-2 Manuel utilisateur
X-Vision
X-Vision XC960DA Manuel utilisateur
